WPANT67001-R1A High Gain GPS Body-mount Antenna Description / Application This is a very High Gain Active Patch Body mount Outdoor antenna for GPS L1 Band function. This can be used in portable navigation and tracking applications where high performance is required. The module consists of a circularly polarized patch antenna and a Low Noise Amplifier (LNA). It comes with RG-58 cable and Type-N Male connector. It can be customized with different cable lengths and connectors. We can assist your engineers to optimize mounting positions for these antennas in your specific application and can further customize the antennas for your specific needs. Please contact [email protected] with your specific application requirements. Electrical Properties Operating Frequency Approximate Antenna Impedance [Ω] LNA Gain [dBi] (Typical) Active Antenna Peak Gain [dBi] Voltage [V] (Typical) Current [mA] (Typical) Noise Figure [dB] (Typical) Polarization Axial Ratio [dB] (Typical) Accepted Power [W] (Max) 1570 – 1580 MHz 50Ω 42 dBi 47 dBi @ Zenith 3–5V 18 – 35 mA 1.5 dB RHCP 3 dB 180 mW Mechanical / Environmental Properties Antenna Dimensions Antenna Color Cable Connector Mount Operating / Storage Temperature Environmental Hazardous Materials Rev: 1.0 Created on: July 01, 2013 3.7’’ Base Dia X 2’’ Height Grey (93.5mm X 51.3mm) RG-58 Type-N Male M26 Screw Mount ; o 1.3’’ Diameter (33mm) o -40 C to +90 C IP67 rated; Meets standards for UL 94V-0 RoHS Compliant Created by: MKS Approved by: BP Page | 1 Pictures & Drawings of the Antenna Rev: 1.0 Created on: July 01, 2013 Created by: MKS Approved by: BP Page | 2