WPANT67002-R1A High Gain GPS Body-mount Antenna Description / Application This is a very High Gain Active Patch Body mount Outdoor antenna for GPS L1 Band function. This can be used in portable navigation and tracking applications where high performance is required. The module consists of a circularly polarized patch antenna and a Low Noise Amplifier (LNA). It comes with a TNC Female connector. It can be customized with different cable assemblies and connectors. We can assist your engineers to optimize mounting positions for these antennas in your specific application and can further customize the antennas for your specific needs. Please contact [email protected] with your specific application requirements. Electrical Properties Operating Frequency Approximate Antenna Impedance [Ω] LNA Gain [dBi] (Typical) Active Antenna Peak Gain [dBi] Voltage [V] (Typical) Current [mA] (Typical) 1572 – 1578 MHz 50Ω 40 dBi 44 dBi @ Zenith 3 – 16 V 15 mA (25 mA Max) Noise Figure [dB] (Typical) 1.5 dB Polarization RHCP Axial Ratio [dB] (Typical) Accepted Power [W] (Max) 3 dB 400 mW Mechanical / Environmental Properties Antenna Dimensions Antenna Color Connector Attachment Method Operating / Storage Temperature Environmental Hazardous Materials Rev: 1.0 Created on: July 01, 2013 2.6’’ Base Dia X 1.9’’ Height Dark Grey (66.5mm X 47.5mm) TNC Female L-bracket option o o -40 C to +90 C IP67 rated; Meets standards for UL 94V-0 RoHS Compliant Created by: MKS Approved by: BP Page | 1 Pictures of the Antenna Rev: 1.0 Created on: July 01, 2013 Created by: MKS Approved by: BP Page | 2