WPANT60025-R1A Pin Style Ceramic GPS Patch Antenna Note: Picture shown here is for reference. Actual antenna is only 1mm thick. Description / Application This is a Pin-style Ceramic Patch Antenna for GPS L1 Band applications. This can be used in portable navigation devices where size and performance are very critical. The antenna can be tuned to any other frequency 15XX MHz and the corresponding part number would be WPANT60025-R1AXX. We can assist your engineers to optimize mounting positions for these antennas in your specific application and can further assist to trouble shoot system integration issues such as TRP/TIS and FCC requirements. We specialize in developing customized Antenna solutions. Please contact [email protected] with your specific application requirements. Electrical Properties Operating Frequency Approximate Antenna Impedance [Ω] VSWR – Typical Peak Gain [dBic] (Typical) Polarization Axial Ratio [dB] (Typical) 1567 – 1583 MHz 50Ω < 1.5:1 @ 1575 MHz 4.5 dBic @ Zenith RHCP 3 dB Mechanical / Environmental Properties Patch Dimensions Antenna Color Operating / Storage Temperature Environmental Hazardous Materials Rev: 2.0 Created on: March 27, 2014 25mm X 25mm X 1mm Brown o o -40 C to +90 C Meets standards for UL 94V-0 RoHS Compliant Created by: MKS Approved by: BP Page | 1 Pictures of the Antenna Note: Picture shown here is for reference. Actual antenna is only 1mm thick. Rev: 2.0 Created on: March 27, 2014 Created by: MKS Approved by: BP Page | 2