MO-9200A

MO-9200A
1-220 MHz High Performance Differen al Oscillator
Applications
Features
• Any frequency between 1 MHz and 220 MHz accurate to 6 decimal places
• SONET, Synchronous Ethernet, SATA, SAS, 10GB
• LVPECL and LVDS output signaling types
Ethernet, Fibre Channel, PCI-Express
• 0.6ps RMS phase ji er (random) over 12 kHz to 20 MHz bandwidth
• Telecom, networking, broadband, instrumenta on
• Industrial and extended commercial temperature ranges
• Industry-standard packages: 3.2mm x 2.5mm, 5.0 mm x 3.2 mm and 7.0 mm x 5.0 mm
Performance SpecificaƟons
Parameter and Condi ons
Symbol
Output Frequency Range
Frequency Stability
Min.
f
F_stab
1
-20
First Year Aging
10-year Aging
Opera ng Temperature Range
T_use
Start-up Time
Duty Cycle
T_start
DC
-50
-2
-5
-40
-20
–
45
Supply Voltage
Vdd
Current Consump on
OE Disable Supply Current
Output Disable Leakage Current
Maximum Output Current
Output High Voltage
Output Low Voltage
Output Differen al Voltage Swing
Rise/Fall Time
OE Enable/Disable Time
RMS Period Ji er
RMS Phase Ji er (random)
Supply Voltage
Idd
I_OE
I_leak
I-driver
VOH
VOL
V_Swing
Tr, Tf
T_oe
T_ji
T_phj
Vdd
Current Consump on
OE Disable Supply Current
Output Disable Leakage Current
Differen al Output Voltage
VOD Magnitude Change
Offset Voltage
VOS Magnitude Change
Rise/Fall Time
OE Enable/Disable Time
RMS Period Ji er
Idd
I_OE
I_leak
VOD
ΔVOD
VOS
ΔVOS
Tr, Tf
T_oe
T_ji
RMS Phase Ji er (random)
T_phj
2.97
2.25
–
–
–
–
Vdd-1.1
Vdd-1.9
1.2
–
–
–
–
–
–
2.97
2.25
–
–
–
200
–
1.125
–
–
–
–
–
–
–
Typ.
Max.
Unit
Condi on
LVPECL and LVDS, Common AC CharacterisƟcs
–
220
MHz
–
+20
PPM
Inclusive of Ini al tolerance at 25 °C, and varia ons over opera ng temperature,
aging, supply voltage and load
–
+50
PPM
–
+2
PPM
25°C
–
+5
PPM
25°C
–
+85
°C
Industrial
–
+70
°C
Extended Commercial
–
10
ms
–
55
%
Contact Vectron for ghter duty cycle
LVPECL, DC and AC CharacterisƟcs
3.3
3.63
V
2.5
2.75
V
61
69
mA
Excluding Load Termina on Current, Vdd = 3.3V or 2.5V
–
35
mA
OE = Low
–
1
μA
OE = Low
–
30
mA
Maximum average current drawn from OUT+ or OUT–
Vdd-0.7
V
See Figure 1
–
Vdd-1.5
V
See Figure 1
1.6
2.0
V
See Figure 1
300
500
ps
20% to 80%
–
115
ns
f = 220 MHz - For other frequencies, T_oe = 100ns + 3 period
1.2
1.7
ps
f = 100 MHz, VDD = 3.3V or 2.5V
1.2
1.7
ps
f = 156.25 MHz, VDD = 3.3V or 2.5V
1.2
1.7
ps
f = 212.5 MHz, VDD = 3.3V or 2.5V
0.6
0.85
ps
f = 156.25 MHz, Integra on bandwidth = 12 kHz to 20 MHz, all Vdds
3.3
2.5
47
–
–
350
–
1.2
–
495
–
1.2
1.2
1.2
0.6
LVDS, DC and AC CharacterisƟcs
3.63
V
2.75
V
55
mA
Excluding Load Termina on Current, Vdd = 3.3V or 2.5V
35
mA
OE = Low
1
μA
OE = Low
500
mV
See Figure 4
50
mV
See Figure 4
1.375
V
See Figure 4
50
mV
See Figure 4
600
ps
20% to 80%
115
ns
f = 220 MHz - For other frequencies, T_oe = 100ns + 3 period
1.7
ps
f = 100 MHz, VDD = 3.3V or 2.5V
1.7
ps
f = 156.25 MHz, VDD = 3.3V or 2.5V
1.7
ps
f = 212.5 MHz, VDD = 3.3V or 2.5V
1.0
ps
f = 156.25 MHz, Integra on bandwidth = 12 kHz to 20 MHz, all Vdds
Page 1 of 6
Vectron Interna onal • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • h p://www.vectron.com
Rev 1.2 Aug 2014
Typical Phase Noise
Page 2 of 6
Vectron Interna onal • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • h p://www.vectron.com
Rev 1.2 Aug 2014
Outline Drawing / Packaging
Package Outline & Dimensions (Unit: mm)
Recommended Land PaƩern (Unit: mm)
[[PP
“
<;;;;
“
“
5.0 x 3.2 x 0.75 mm
#5
#4
#2
#3
#4
#5
#6
1.20
#6
YXXXX
#1
#3
#2
#1
0.75±0.05
7.0 x 5.0 x 0.90 mm
5.08
7.0±0.10
5.08
1.10
YXXXX
1.60
3.80
2.60
5.0±0.10
0.90 ±0.10
1.40
1.60
Top View
Pin ConnecƟons
Pin
Symbol
1
OE
Input
H or Open: specified frequency output L: output is high impedance
Func onality
2
NC
NA
Do Not Connect; Leave it floa ng
3
GND
Power
VDD Power Supply Ground
4
OUT+
Output
Oscillator output
5
OUT-
Output
Complementary oscillator output
6
VDD
Power
Power supply voltage
OE 1
6
VDD
NC 2
5
OUT-
GND 3
4
OUT+
Page 3 of 6
Vectron Interna onal • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • h p://www.vectron.com
Rev 1.2 Aug 2014
TerminaƟon Circuit Examples
VDD
Z 0 = 50 :
OUT+
D+
Receiver Device
D rive D ev ice
Z0 = 5 0 :
OUT-
D50 :
50 :
V T T = V D D – 2.0 V
Figure 1. LVPECL Typical Termina on
VDD
R1 = 100 to 150 :
100 nF
Z0 = 50 :
OUT+
D+
Receiver Device
Drive Device
100 nF
Z0 = 50 :
OUTR1
R1
D50 :
50 :
VTT
Figure 2. LVPECL AC Coupled Termina on
VDD = 3.3V => R1 = R3 = 133 : and
R2 = R4 = 82 :
VDD
VDD = 2.5V => R1 = R3 = 250 : and
R2 = R4 = 62.5 :
R1
VDD
R3
Z0 = 50 :
OUT+
D+
Receiver
Device
Drive Device
Z0 = 50 :
OUT-
DR2
R4
Figure 3. LVPECL with Thevenin Typical Termina on
VDD
OUT+
Z0 = 50 :
D+
100 :
Drive Device
OUT-
Z0 = 50 :
Receiver Device
D-
Figure 4. LVDS Single Termina on (Load Terminated)
Page 4 of 6
Vectron Interna onal • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • h p://www.vectron.com
Rev 1.2 Aug 2014
Absolute Maximum RaƟngs and Test Compliance
Maximum RaƟngs
Parameter
Min.
Max.
Unit
Storage Temperature
-65
150
°C
VDD
-0.5
4
V
Electrosta c Discharge
–
2000
V
Soldering Temperature (follow standard Pb free soldering guidelines)
–
260
°C
Environmental Compliance
Parameter
Condi on/Test Method
Mechanical Shock
MIL-STD-883F, Method 2002
Mechanical Vibra on
MIL-STD-883F, Method 2007
Temperature Cycle
JESD22, Method A104
Solderability
MIL-STD-883F, Method 2003
Moisture Sensi vity Level
MSL1 @ 260°C
Ordering InformaƟon
MO - 9200A E - C 3 F - E E 125M000000
Product
MO: MEMS XO
Frequency
Feature Pin
E: Enable/Disable
Family
9200A: Differen al clock, 1-220MHz
Temp Range
J: -20/70°C
E: -40/85°C
Supply Voltage
E: +3.3 Vdc, ±5%
H: +2.5 Vdc, ±5%
Output
C: LVPECL
D: LVDS
Package
1: 6 pin 7.0mm x 5.0mm
3: 6 pin 5.0mm x 3.2mm
5: 6 pin 3.2mm x 2.5mm
Stability
E: ±20ppm
F: ±25ppm
K: ±50ppm
Notes:
1. Contact factory for improved stabili es or addi onal product op ons. Not all op ons and codes are available at all
frequencies.
2. Unless otherwise stated all values are valid a er warm-up me and refer to typical condi ons for supply voltage, frequency
control voltage, load, temperature (25°C).
3. Subject to technical modifica on.
4. Contact factory for availability.
Page 5 of 6
Vectron Interna onal • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • h p://www.vectron.com
Rev 1.2 Aug 2014
Revision History
Revision
Change Summary
Date
1.0
Product Release
June 2013
1.1
Knowles logo and address change
Feb 2014
1.2
Add ±20ppm temperature stability
Aug 2014
For Additional Information, Please Contact
USA:
Europe:
Asia:
Vectron Interna onal
267 Lowell Road, Suite 102
Hudson, NH 03051
Tel: 1.888.328.7661
Fax: 1.888.329.8328
Vectron Interna onal
Landstrasse, D-74924
Neckarbischofsheim, Germany
Tel: +49 (0) 7268.801.100
Fax: +49 (0) 7268.801.282
68 Yin Cheng Road(C), 22nd Floor
One Lu Jia Zui
Pudong, Shanghai 200120, China
Tel: +86 21 6194 6886
Fax: +86 21 6194 6699
Disclaimer
Vectron Interna onal reserves the right to make changes to the product(s) and or informa on contained herein without no ce. No liability is assumed as a result of their use or applicaon. No rights under any patent accompany the sale of any such product(s) or informa on.
Page 6 of 6
Vectron Interna onal • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • h p://www.vectron.com
Rev 1.2 Aug 2014