MO-9150A 80-220 MHz High Performance Oscillator Applications Features •Any frequency between 80.000001 and 220 MHz accurate to 6 dp •CMOS compatible output •Ultra low phase jitter: 0.5 ps (12 kHz to 20 MHz) •Industrial and extended commercial temperature ranges •Standard 4-pin packages: 2.5 x 2.0, 3.2 x 2.5, 5.0 x 3.2, 7.0 x 5.0 mm •Computing, storage, networking, telecom, industrial control •SATA, SAS, Ethernet, PCI Express, video, WiFi Performance Specifications Parameter and Conditions Output Frequency Range Frequency Stability Symbol f F_stab First year Aging 10-year Aging Operating Temperature Range F_aging Supply Voltage Min. 80 -25 Typ. - Max. 220 +25 Unit MHz PPM T_use -50 -1.5 -5 -20 - +50 +1.5 +5 +70 PPM PPM PPM °C Vdd -40 1.71 1.8 +85 1.89 °C V 2.25 2.52 2.97 45 40 90% 2.5 2.8 3.3 34 30 1.5 - 2.75 3.08 3.63 36 33 31 30 70 10 55 60 2 - V V V mA mA mA mA μA μA % % ns Vdd 70% - 100 6 – – 1.5 2 0.6 10% 30% 250 10 115 10 2 3 1 Vdd Vdd Vdd kΩ ms ns ms ps ps ps Current Consumption Idd OE Disable Current I_OE Standby Current I_std Duty Cycle Rise/Fall Time Output Voltage High Output Voltage Low Input Voltage High Input Voltage Low Input Pull-up Impedance Startup Time OE Enable/Disable Time Resume Time RMS Period Jitter RMS Phase Jitter (random) DC Tr, Tf VOH VOL VIH VIL Z_in T_start T_oe T_resume T_jitt T_phj Condition Inclusive of Initial tolerance at 25 °C, and variations over operating temperature, aging, supply voltage and load 25°C 25°C Extended Commercial Industrial Supply voltages between 2.5V and 3.3V are supported in increments of 0.1 V. Contact Vectron for guaranteed performance specs for supply voltages not specified in this table. No load condition, f = 100 MHz, Vdd = 2.5V, 2.8V or 3.3V No load condition, f = 100 MHz, Vdd = 1.8V Vdd = 2.5V, 2.8V or 3.3V, OE = GND, output is Weakly Pulled Down Vdd = 1.8 V. OE = GND, output is Weakly Pulled Down Vdd = 2.5V, 2.8V or 3.3V, ST = GND, output is Weakly Pulled Down Vdd = 1.8 V. ST = GND, output is Weakly Pulled Down f <= 165 MHz, all Vdds. f > 165 MHz, all Vdds. 15 pF load, 10% -90% Vdd OH = -7 mA, IOL = 7 mA, (Vdd = 3.3V) IOH = -4 mA, IOL = 4 mA, (Vdd = 2.8V, 2.5V) IOH = -2 mA, IOL = 2 mA, (Vdd = 1.8V) Pin 1, OE or ST Pin 1, OE or ST Measured from the time Vdd reaches its rated minimum value f = 220 MHz, For other frequencies, T_oe = 100 ns + 3 cycles Measured from the time ST pin crosses 50% threshold f = 156.25 MHz, Vdd = 2.5V, 2.8V or 3.3V f = 156.25 MHz, Vdd = 1.8V f = 156.25 MHz, Integration bandwidth = 12 kHz to 20 MHz Page 1 of 4 Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Rev 7: Feb 2014 Timing Diagrams 90% Vdd, 2.5/2,8/3.3V devices Vdd 95% Vdd, 1.8V devices Vdd Pin 4 Voltage ST Voltage 50% Vdd T_start T_resume CLK Output T_start: Time to start from power-off (ST/OE Mode) CLK Output T_resume: Time to resume from standby (ST Mode Only) Typical Performance Page 2 of 4 Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Rev 7: Feb 2014 Outline Drawing / Packaging Package Outline & Dimensions (Unit: mm) Recommended Land Pattern (Unit: mm) 2.7 x 2.4 x 0.75 mm (100% compatible with 2.5 x 2. 0 mm footprint) YXXXX 3.2 x 2.5 x 0.75 mm 2.2 3.2 ± 0.05 2.1 #3 0.7 #2 #1 0.9 0.75 ± 0.05 #2 1.2 #1 0.9 YXXXX #4 1.9 #3 2.5 ± 0.05 #4 1.4 5.0 x 3.2 x 0.75 mm 2.54 5.0 ± 0.05 2.39 #3 #2 2.2 #1 1.6 #2 0.75 ± 0.05 #1 1.1 YXXXX #4 0.8 #3 3.2 ± 0.05 #4 1.15 1.5 7.0 x 5.0 x 0.90 mm 5.08 2.6 0.90 ± 0.10 2.0 1.1 YXXXX 5.0 ± 0.05 7.0 ± 0.05 3.81 5.08 1.4 2.2 Top View Pin Connections Pin Symbol 1 OE/ ST Functionality Output Enable H or Open[*]: specified frequency output L: output is high impedance. Only output driver is disabled. Standby H or Open[3*: specified frequency output L: output is low (weak pull down). Device goes to sleep mode. Supply current reduces to I_std. 2 GND Power Electrical and case ground 3 OUT Output Oscillator output 4 VDD Power Power supply voltage OE/ST 1 4 VDD GND 2 3 OUT *A pull-up resistor of <10 kΩ between OE/ ST pin and Vdd is recommended in high noise environment Page 3 of 4 Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Rev 7: Feb 2014 Absolute Maximum Ratings and Test Compliance Maximum Ratings Parameter Min Max Unit Storage Temperature -65 150 °C VDD -0.5 4 V Electrostatic Discharge – 2000 V Soldering Temperature (follow standard Pb free soldering guidelines) – 260 °C Number of Program Writes – 1 NA Program Retention over -40 to 125°C, Process, VDD (0 to 3.65V) 1,000+ – years Environmental Compliance Parameter Condition/Test Method Mechanical Shock MIL-STD-883F, Method 2002 Mechanical Vibration MIL-STD-883F, Method 2007 Temperature Cycle JESD22, Method A104 Solderability MIL-STD-883F, Method 2003 Moisture Sensitivity Level MSL1 @ 260°C Ordering Information MO - 9150A E - 4 F - E E - 156M250000 Product MO: MEMS XO Frequency Feature Pin E: Enable/Disable S: Standby Family 9150A: CMOS clock, 80-220MHz Temp Range J: -20/70°C E: -40/85°C Package 2: 4 pin 7.0mm x 5.0mm 4: 4 pin 5.0mm x 3.2mm 6: 4 pin 3.2mm x 2.5mm 8: 4 pin 2.5mm x 2.0mm compatible Stability F: ±25ppm K: ±50ppm Supply Voltage E: +3.3 Vdc G: +2.8 Vdc H: +2.5 Vdc J: +1.8 Vdc Notes: 1. Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. 2. Unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25°C). 3. Subject to technical modification. 4. Contact factory for availability. For Additional Information, Please Contact USA: Vectron International 267 Lowell Road Hudson, NH 03051 Tel: 1.888.328.7661 Fax: 1.888.329.8328 Europe: Vectron International Landstrasse, D-74924 Neckarbischofsheim, Germany Tel: +49 (0) 7268.801.100 Fax: +49 (0) 7268.801.282 Asia: 68 Yin Cheng Road(C), 22nd Floor One Lu Jia Zui Pudong, Shanghai 200120, China Tel: +86 21 6194 6886 Fax: +86 21 6194 6699 Disclaimer Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Page 4 of 4 Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Rev 7: Feb 2014