MV-9300A 1-80 MHz High Performance VCXO Applications Features • Any frequency between 1 MHz and 80 MHz with 6 decimal places of accuracy • Ideal for telecom clock synchroniza on, low • CMOS compa ble output bandwidth analog PLL, ji er cleaning, clock recovery, • Industrial and extended commercial temperature ranges audio, video, FPGA, broadband and networking • Industry-standard packages: 3.2 mm x2.5 mm (4-pin), 5.0 mm x 3.2 mm (6-pin), 7.0 mm x 5.0 mm (6-pin) Performance SpecificaƟons Parameter and Condi ons Output Frequency Range Frequency Stability Symbol f F_stab Aging Opera ng Temperature Range F_aging T_use Supply Voltage Vdd Min. 1 -20 Typ. – – Max. 80 +20 Unit MHz PPM -50 – -20 -40 1.71 2.25 2.52 2.97 – – – – 1.8 2.5 2.8 3.3 ±50, ±80, ±100 – – – – – – +50 ±5 +70 +85 1.89 2.75 3.08 3.63 – – – – 0.1 – PPM PPM °C °C V V V V PPM V V V V V kΩ 1 % – kHz Contact Vectron for 16 kHz and other high bandwidth op ons No load condi on, f = 20 MHz, Vdd = 2.5 V, 2.8 V or 3.3 V No load condi on, f = 20 MHz, Vdd = 1.8 V All Vdds, ST = GND, output is Weakly Pulled Down All Vdds Vdd = 1.8, 2.5, 2.8 or 3.3 V, 10% - 90% Vdd level OH = -7 mA, IOL = 7 mA, (Vdd = 3.3 V) IOH = -4 mA, IOL = 4 mA, (Vdd = 2.8 V and Vdd = 2.5 V) IOH = -2 mA, IOL = 2 mA, (Vdd = 1.8 V) Pull Range Upper Control Voltage PR VC_U Lower Control Voltage Control Voltage Input Impedence Linearity Frequency Change Polarity Control Voltage Bandwidth (-3dB) Current Consump on VC_L Z_vin 1.7 2.4 2.7 3.2 – 100 Lin – V_BW – 0.1 Posi ve slope 8 Idd – – – 45 – 90% 31 29 – – 1.5 – 33 31 70 55 2 – mA mA μA % ns Vdd – – – – – – 100 6 – – 10% 250 10 150 10 Vdd kΩ ms ns ms – – – 1.5 2 0.6 2 3 1 ps ps ps Standby Current Duty Cycle Rise/Fall Time Output Voltage High Output Voltage Low Input Pull-up Impedance Start-up Time OE Enable/Disable Time Resume Time RMS Period Ji er RMS Phase Ji er (random) I_std DC Tr, Tf VOH VOL Z_in T_start T_oe T_ resume T_ji T_phj Condi on Inclusive of Ini al tolerance at 25 °C, and varia ons over opera ng temperature, aging, supply voltage and load 10 years Extended Commercial Industrial Contact Vectron for any other voltage support between 2.5V and 3.3V Vdd = 1.8 V, Voltage at which maximum devia on is guaranteed. Vdd = 2.5 V, Voltage at which maximum devia on is guaranteed. Vdd = 2.8 V, Voltage at which maximum devia on is guaranteed. Vdd = 3.3 V, Voltage at which maximum devia on is guaranteed. Voltage at which miminum devia on is guaranteed. For the voltage control pin For the OE/ST pin if available f=80 MHz, all Vdds. For other freq, T_oe = 100 ns + 3 cycles Measured from the me ST pin crosses 50% threshold f = 75 MHz, Vdd = 2.5 V, 2.8 V or 3.3 V f = 75 MHz, Vdd = 1.8 V f = 75 MHz, Integra on bandwidth = 12 kHz to 20 MHz, all Vdds Page 1 of 5 Vectron Interna onal • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • h p://www.vectron.com Rev 1.2 Aug 2014 Typical Phase Noise Page 2 of 5 Vectron Interna onal • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • h p://www.vectron.com Rev 1.2 Aug 2014 Packaging and Pinout Package Outline & Dimensions (Unit: mm) Recommended Land PaƩern (Unit: mm) 3.2 x 2.5 x 0.75 mm 3.2 ± 0.15 2.2 2.1 #3 #2 1.9 #1 0.9 0.75 ± 0.05 #2 1.2 #1 0.7 YXXXX #4 0.9 #3 2.5 ± 0.15 #4 1.4 5.0 x 3.2 x 0.75 mm #5 #4 #2 #3 #4 #5 #6 1.20 #6 YXXXX #1 #3 #2 #1 0.75±0.05 5.08 7.0 x 5.0 x 0.90 mm 5.08 1.10 ;;;; 1.40 0.85 ±0.15 2.60 5.0±0.10 3.80 7.0±0.10 1.60 4 pin package: Pin ConnecƟons Pin Symbol Func onality 1 VIN 0-Vdd: Produces voltage dependent frequency change 2 GND VDD Power Supply Ground 3 CLK Oscillator output 4 Vdd Power supply voltage 6 pin package: Pin ConnecƟons Pin Symbol Func onality 1 VIN 0-Vdd: Produces voltage dependent frequency change 2 (op ons) NC H or L or Open: No effect on output frequency or other device func ons OE H or Open: specified frequency output, L: output is high impedance ST H or Open: specified frequency output, L: output is low level (weak pull down). Oscilla on stops 3 GND VDD Power Supply Ground 4 CLK Oscillator output 5 NC Do Not Connect; Leave it floa ng 6 Vdd Power supply voltage Page 3 of 5 Vectron Interna onal • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • h p://www.vectron.com Rev 1.2 Aug 2014 Absolute Maximum RaƟngs and Test Compliance Maximum RaƟngs Parameter Min. Max. Unit Storage Temperature -65 150 °C VDD -0.5 4 V Electrosta c Discharge – 6000 V Soldering Temperature (follow standard Pb free soldering guidelines) – 260 °C Program Reten on over -40 to 125°C, Process, Vdd (0 to 3.65 V) 1,000+ - Years Environmental Compliance Parameter Condi on/Test Method Mechanical Shock MIL-STD-883F, Method 2002 Mechanical Vibra on MIL-STD-883F, Method 2007 Temperature Cycle JESD22, Method A104 Solderability MIL-STD-883F, Method 2003 Moisture Sensi vity Level MSL1 @ 260°C Ordering InformaƟon MV - 9300A E - 1 F - E E K 25M0000000 Product MV: MEMS VCXO Frequency Family 9300A: VCXO, 1-80MHz Temp Range J: -20/70°C E: -40/85°C Package 1: 6 pin 7.0mm x 5.0mm 3: 6 pin 5.0mm x 3.2mm 6: 4 pin 3.2mm x 2.5mm Stability E: ±20ppm F: ±25ppm K: ±50ppm Supply Voltage E: +3.3 Vdc G: +2.8 Vdc H: +2.5Vdc J: +1.8 Vdc Feature Pin N: No Connect (6 pin op on, default for 4 pin) E: Ouput Enable S: Standby Pull Range (APR) K: 50ppm P: 80ppm S: 100ppm Notes: 1. Contact factory for improved stabili es or addi onal product op ons. Not all op ons and codes are available at all frequencies. 2. Unless otherwise stated all values are valid a er warm-up me and refer to typical condi ons for supply voltage, frequency control voltage, load, temperature (25°C). 3. Subject to technical modifica on. 4. Contact factory for availability. Page 4 of 5 Vectron Interna onal • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • h p://www.vectron.com Rev 1.2 Aug 2014 Revision History Revision Change Summary Date 1.0 Product Release June 2013 1.1 Knowles logo and address change Feb 2014 1.2 Add ±20ppm temperature stability Aug 2014 For Additional Information, Please Contact USA: Europe: Asia: Vectron Interna onal 267 Lowell Road, Suite 102 Hudson, NH 03051 Tel: 1.888.328.7661 Fax: 1.888.329.8328 Vectron Interna onal Landstrasse, D-74924 Neckarbischofsheim, Germany Tel: +49 (0) 7268.801.100 Fax: +49 (0) 7268.801.282 68 Yin Cheng Road(C), 22nd Floor One Lu Jia Zui Pudong, Shanghai 200120, China Tel: +86 21 6194 6886 Fax: +86 21 6194 6699 Disclaimer Vectron Interna onal reserves the right to make changes to the product(s) and or informa on contained herein without no ce. No liability is assumed as a result of their use or applicaon. No rights under any patent accompany the sale of any such product(s) or informa on. Page 5 of 5 Vectron Interna onal • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • h p://www.vectron.com Rev 1.2 Aug 2014