Measurement condition

Filename: tfs 325c.doc
Version 1.6
VI TELEFILTER
22.08.2006
Filter specification
TFS 325C
1/5
unMeasurement condition
Ambient temperature:
Input power level:
Terminating impedance: *
Input:
Output:
23
0
°C
dBm
84 Ω || -20,1 pF
112 Ω || -16,6 pF
Characteristics
Remark:
The reference level for the relative attenuation arel of the TFS 325C is the minimum of the pass band attenuation. This value is defined as the insertion loss
ae. The nominal frequency fN is fixed at 325 MHz without any tolerance. The values of relative attenuation arel are guaranteed for the whole operating
temperature range. The frequency shift of the filter in the operating temperature range is included in the production tolerance scheme.
Data
typ. value
Insertion loss
(reference level)
ae
fN
-
PB
-
Nominal frequency
Passband
Pass band ripple
Relative attenuation
fN
fN
fN
fN
fN
fN
fN
fN
fN
fN
fN
±
±
±
+
+
+
+
+
7,5
12
13
315
105
25
30
50
55
80
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
12
dB
tolerance / limit
max.
14
325
fN
0,22
dB
max.
±
dB
MHz
5
MHz
1
dB
arel
… fN
±
5
MHz
1,2
dB
max.
2
dB
…
…
…
…
…
…
…
…
…
…
±
±
±
+
+
+
+
+
12
13
25
105
25
30
50
55
80
175
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
4,5
40
52
65
52
45
40
45
40
50
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
min.
min.
min.
min.
min.
min.
min.
min.
min.
min.
3
30
40
50
45
40
35
40
35
40
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
µs
max.
1
µs
ns
max.
75
ns
fN
fN
fN
fN
fN
fN
fN
fN
fN
fN
Group delay within PB
0,32
Group delay ripple within PB
20
Phase linearity within PB
Operating temperature range
4,1
OTR
Storage temperature range
Temperature coefficient of frequency
TCf **
deg
-
-
- 40 °C ... + 85°C
-
- 40 °C ... + 85°C
-18
ppm/K
-
*) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as reference values
only. Should there be additional questions do not hesitate to ask for an application note or contact our design team.
**) ∆f(Hz) =TCf(ppm/K) x(T-T0) x fTo (MHz)
Generated:
Checked / Approved:
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs 325c.doc
Version 1.6
VI TELEFILTER
22.08.2006
Filter specification
TFS 325C
2/5
0
0.85
-1
0.79
-14
-2
0.73
-21
-3
0.67
-28
-4
0.61
-5
0.55
-6
0.49
-49
-7
0.43
-56
-8
0.37
-63
-9
0.31
-35
-42
-70
Construction
and
pin285connection
225
245
265
305
325
345
365
385
405
425
-10
317
318.6
320.2
321.8
frequency in MHz
323.4
325
326.6
frequency in MHz
328.2
329.8
331.4
delay in µs
0
-7
magnitude in dB
magnitude in dB
Filter characteristic
0.25
333
(All dimensions in mm)
Construction and pin connection
(All dimensions in mm)
S 325C
● U29
3
Date code
2 Max.
1
Ground
Ground
Input
Input RF Return or Input
Ground
Ground
Ground
Ground
Output
Output RF Return or Output
Ground
Ground
Date code:
U
V
W
...
Year + week
2006
2007
2008
1
5,2 Max.
2,54 ±0,2
7,2 Max.
2,54 ±0,2
1
1
2
3
4
5
6
7
8
9
10
11
12
0,80
50 Ω Test circuit
9
L1
10
C1
3
SAW
L2
L3
4
L4
C2
1, 2, 5, 6, 7, 8, 11, 12
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs 325c.doc
Version 1.6
VI TELEFILTER
22.08.2006
Filter specification
TFS 325C
3/5
Stability characteristics, reliability
After the following tests the filter shall meet the whole specification:
1. Shock:
500g, 1 ms, half sine wave, 3 shocks each plane;
DIN IEC 68 T2 - 27
2. Vibration:
10 Hz to 500 Hz, 0,35 mm or 5 g respectively, 1 octave per min, 10 cycles per plan, 3 plans;
DIN IEC 68 T2 - 6
3. Change of
temperature:
4. Resistance to
solder heat (reflow):
-55 °C to 125°C / 30 min. each / 10 cycles
DIN IEC 68 part 2 – 14 Test N
reflow possible: three times max.;
for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4;
This filter is RoHS compliant (2002/95/EG, 2005/618/EG)
Packing
Tape & Reel:
IEC 286 – 3, with exception of value for N and minimum bending radius;
tape type II, embossed carrier tape with top cover tape on the upper side;
max. pieces of filters per reel:
reel of empty components at start:
reel of empty components at start including leader:
trailer:
3000
min. 300 mm
min. 500 mm
min. 300 mm
Pull Off Direction
Tape (all dimensions in mm)
W
: 16,00 ± 0,3
Po
: 4,00 ± 0,1
Do
: 1,50 +0,1/-0
E
: 1,75 ± 0,1
F
: 7,50 ± 0,1
G(min)
: 0,60
P2
: 2,00 ± 0,1
P1
: 8,00 ± 0,1
D1(min)
: 1,50
Ao
: 5,50 ± 0,1
Bo
: 7,50 ± 0,1
Ct
: 13,5 ± 0,1
P1
Date Code
Po
Do
P2
W
G
Ct
Bo
F
G
E
t
Ko
Typ
PIN Marker
D1
Ao
W 2
Reel (all dimensions in mm)
A
: 330
W1
: 16,4 +2/-0
W2(max) : 22,4
N(min)
: 50
C
: 13,0 +0,5/-0,2
A
C
N
W 1
The minimum bending radius is 45 mm.
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs 325c.doc
Version 1.6
VI TELEFILTER
22.08.2006
Filter specification
TFS 325C
4/5
Air reflow temperature conditions
Conditions
Average ramp-up rate (30°C to 217°C)
> 100°C
> 150°C
> 217°C
Peak temperature
Time within 5°C of actual peak temperature
Cool-down rate (Peak to 50°C)
Time from 30°C to Peak temperature
Exposure
less than 3°C/second
between 300 and 600 seconds
between 240 and 500 seconds
between 30 and 150 seconds
max. 260°C
between 10 and 30 seconds
less than 6°C/second
no greater than 300 seconds
Chip-mount air reflow profile
Temperature / °C
max. 260°C
217°C
max. 300 s
10 ... 30 s
Time / s
30 ... 150 s
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs 325c.doc
VI TELEFILTER
Version 1.6
Filter specification
22.08.2006
TFS 325C
5/5
History
Version
Reason of Changes
Name
Date
1.0
Generation of development specification
Alawneh
15.05.2006
1.1
Pinning modified
Alawneh
06.06.2006
1.2
Add 40 dB rejection level
Strehl
14.06.2006
1.3
Change data
Strehl
30.06.2006
1.4
- terminating impedances, typical values, filter characteristics and matching configuration added
- limits of relative attenuations changed
Pfeiffer
20.07.2006
1.5
- correct pin connection and test circuit
Noack
02.08.2006
1.6
- test circuit corrected
Pfeiffer
22.08.2006
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.