UNISONIC TECHNOLOGIES CO., LTD UT4404 Power MOSFET N-CHANNEL ENHANCEMENT MODE DESCRIPTION The UTC UT4404 provide excellent RDS (ON), low gate charge and operation with gate voltages as low as 2.5V by using advanced trench technology. The UTC UT4404 is suitable for use in PWM applications and as a load switch. Separating the source leads is to allow a Kelvin connection to the source to bypass the source inductance. SYMBOL ORDERING INFORMATION Ordering Number Note: SOP-8 UT4404G-S08-R Pin Assignment: G: Gate Package D: Drain SOP-8 S: Source 1 S 2 S Pin Assignment 3 4 5 6 S G D D 7 D 8 D Packing Tape Reel MARKING www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd 1 of 5 QW-R502-132.E UT4404 Power MOSFET ABSOLUTE MAXIMUM RATINGS (TA=25°C, unless otherwise specified) PARAMETER Drain-Source Voltage Gate-Source Voltage RATINGS UNIT 30 V ±12 V TA=25°C 8.5 A Continuous Drain Current (Note 2) ID TA=70°C 7.1 A Pulsed Drain Current (Note 2) IDM 60 A TA=25°C 2.8 W PD Power Dissipation TA=70°C 1.8 W Junction Temperature TJ +150 °C Storage Temperature TSTG -55 ~ +150 °C Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. Repetitive Rating : Pulse width limited by TJ SYMBOL VDS VGS THERMAL DATA PARAMETER Junction to Ambient SYMBOL θJA MIN TYP 70 MAX 100 UNIT °C/W ELECTRICAL CHARACTERISTICS (TJ =25°C, unless otherwise specified) PARAMETER STATIC PARAMETERS Drain-Source Breakdown Voltage Drain-Source Leakage Current Gate-Source Leakage Current ON CHARACTERISTICS Gate-Threshold Voltage On state drain current Static Drain-Source On-Resistance SYMBOL TEST CONDITIONS BVDSS IDSS IGSS VGS =0 V, ID =250µA VDS =24 V, VGS =0V VDS =0 V, VGS = ±12V 30 VGS(TH) ID(ON) VDS =VGS, ID =250µA VGS=4.5V, VDS=5V VGS =10 V, ID =8.5A VGS =4.5 V, ID =8.5A VGS = 2.5V, ID =5A 0.7 40 RDS(ON) DYNAMIC PARAMETERS Input Capacitance CISS Output Capacitance COSS VDS =15 V, VGS =0V, f=1MHz Reverse Transfer Capacitance CRSS Gate resistance Rg VGS=0V, VDS=0V, f=1MHz SWITCHING PARAMETERS Turn-ON Delay Time tD(ON) Turn-ON Rise Time tR VGS=10V,VDS=15V Turn-OFF Delay Time tD(OFF) RL=1.8Ω, RGEN=6Ω Turn-OFF Fall-Time tF Total Gate Charge QG VDS =15V, VGS =4.5V, Gate-Source Charge QGS ID =8.5A Gate-Drain Charge QGD DRAIN-SOURCE DIODE CHARACTERISTICS AND MAXIMUM RATINGS Diode Forward Voltage VSD VGS=0V, IS=1A Maximum Body-Diode Continuous IS Current Body Diode Reverse Recovery Time tRR IF=5A, dI/dt =100A/μs Body Diode Reverse Recovery Charge QRR IF=5A, dI/dt =100A/μs Notes: 1. Pulse Test: Pulse width≤300μs, Duty cycle 0.5% max. 2. Surface mounted on 1 in2 copper pad of FR4 board UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP MAX UNIT 0.002 1 ±100 V µA nA 1 1.4 18 22 32 24 30 48 V A mΩ mΩ mΩ 857 97 71 1.4 pF pF pF Ω 3.2 3.5 21.5 2.7 10 1.8 3.75 ns ns ns ns nC nC nC 0.71 16.8 8 12 1 V 4.5 A 20 12 ns nC 2 of 4 QW-R502-132.E UT4404 Power MOSFET TYPICAL CHARACTERISTICS On-Region Characteristics 30 Transfer Characteristics 20 10V 25 VDS=5V 16 4.5V 20 VGS=3V 12 15 2.5V 10 5 100 ID=5A 80 70 60 50 125°C 40 30 25°C 20 4 6 8 2 Gate-Source Voltage, VGS (V) 0 2.5 1 2 1.5 0.5 Drain-Source Voltage, VDS (V) 3 Body-Diode Characteristics 1.0E+0.1 1.0E+0.0 1.0E-0.1 125°C 1.0E-0.2 1.0E-0.3 25°C 1.0E-0.4 1.0E-0.5 1.0E-0.6 0.0 10 0.2 0.4 0.6 0.8 1.0 Source-Drain Voltage, VSD (V) 1.2 Capacitance (pF) Gage-Source Voltage, VGS (V) 0 0 5 On-Resistance vs.Gate-to-Source Voltage 90 10 25°C 3 4 2 1 Drain-Source Voltage, VDS (V) 0 125°C 4 2V Drain-Source Diode Forward Current,IS (A) Static Drain-Source On-Resistance, RDS(ON) (mΩ) 0 8 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 4 QW-R502-132.E UT4404 TYPICAL CHARACTERISTICS(Cont.) ZθJA.Normailized Transient Thermal Resistance Power (W) Drain Current, ID (A) Power MOSFET UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 4 QW-R502-132.E