RY2 miniature industrial relays •Relays of general application •For plug-in sockets: 35 mm rail mount acc. to PN-EN 60715; on panel mounting •For direct mounting on panel - cover with mounting flange • Flat insert connectors - faston 187 (4,8 x 0,5 mm) • Recognitions, certifications, directives: RoHS, Contact data Number and type of contacts Contact material Rated / max. switching voltage AC Min. switching voltage Rated load AC1 DC1 Min. switching current Max. inrush current Rated current Max. breaking capacity AC1 Min. breaking capacity Contact resistance Max. operating frequency • at rated load AC1 • no load 2 CO AgNi, AgCdO 250 V / 440 V 5 V AgNi, 10 V AgCdO 12 A / 250 V AC 12 A / 30 V DC 5 mA AgNi, 10 mA AgCdO 20 A 12 A 3 000 VA 0,3 W AgNi, 1 W AgCdO 100 m Rated voltage 50/60 Hz, 50 Hz AC DC Must release voltage Operating range of supply voltage Rated power consumption AC DC 6 ... 240 V 5 ... 220 V AC: 0,2 Un DC: 0,1 Un see Tables 1, 2, 3 1,6 VA 0,9 W Insulation rated voltage Rated surge voltage Overvoltage category Insulation pollution degree Dielectric strength • between coil and contacts • contact clearance • pole - pole Contact - coil distance • clearance • creepage 250 V AC 4 000 V 1,2 / 50 µs III 3 Operating / release time (typical values) Electrical life • resistive AC1 • cos Mechanical life (cycles) Dimensions (L x W x H) Weight Ambient temperature • storage • operating Cover protection category Shock resistance Vibration resistance 15 ms / 10 ms Coil data Insulation according to PN-EN 60664-1 General data 1 200 cycles/hour 18 000 cycles/hour 2 500 V AC 1 000 V AC 2 500 V AC type of insulation: basic type of clearance: micro-disconnection type of insulation: basic 2,6 mm 4 mm > 105 12 A, 250 V AC see Fig. 2 > 107 27,5 x 21,1 x 34,5 mm ❶ 35 g -40...+70 oC -40...+55 oC IP 40 PN-EN 60529 10 g 5 g 15...150 Hz 28.01.2014 The data in bold type pertain to the standard versions of the relays. ❶ For plug-in sockets version: standard 1 Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected] www.relpol.com.pl RY2 miniature industrial relays Coil data - DC voltage version Rated voltage V DC Coil resistance at 20 °C Acceptable resistance Coil operating range V DC min. (at 20 °C) max. (at 55 °C) 1005 5 28 ± 10% 4,0 1006 6 40 ± 10% 4,8 5,5 6,6 1012 12 160 ± 10% 9,6 13,2 1024 24 640 ± 10% 19,2 26,4 1048 48 2 600 ± 10% 38,4 52,8 1060 60 4 000 ± 10% 48,0 66,0 1080 80 7 100 ± 10% 64,0 88,0 1110 110 13 600 ± 10% 88,0 121,0 1125 125 16 000 ± 10% 100,0 137,5 1220 220 54 000 ± 10% 176,0 242,0 Coil data - AC 50/60 Hz voltage version, basic Coil code Rated voltage V AC Table 2 Coil resistance at 20 °C Acceptable resistance Coil operating range V AC min. (at 20 °C) max. (at 55 °C) 5006 6 9,8 ± 10% 4,8 6,6 5012 12 39,5 ± 10% 9,6 13,2 5024 24 158 ± 10% 19,2 26,4 5042 42 470 ± 10% 33,6 46,2 5048 48 640 ± 10% 38,4 52,8 5060 60 930 ± 10% 48,0 66,0 5080 80 1 720 ± 10% 64,0 88,0 5110 110 3 450 ± 10% 88,0 121,0 5120 120 3 770 ± 10% 96,0 132,0 5127 127 4 000 ± 10% 101,6 139,7 5220 220 15 400 ± 10% 176,0 242,0 5230 230 16 100 ± 10% 184,0 253,0 5240 240 16 800 ± 10% 192,0 264,0 Coil data - AC 50 Hz voltage version, special Coil code Rated voltage V AC 3006 6 3012 3024 Table 3 Coil resistance at 20 °C Acceptable resistance 5 ± 10% 12 50 24 190 3036 36 3042 Coil operating range V AC min. (at 20 °C) max. (at 55 °C) 4,8 6,6 ± 10% 9,6 13,2 ± 10% 19,2 26,4 400 ± 10% 28,8 39,6 42 565 ± 10% 33,6 46,2 3048 48 785 ± 10% 38,4 52,8 3060 60 1 240 ± 10% 48,0 66,0 3080 80 2 190 ± 10% 64,0 88,0 3110 110 3 880 ± 10% 88,0 121,0 3120 120 4 150 ± 10% 96,0 132,0 3127 127 4 940 ± 10% 102,0 140,0 3220 220 16 300 ± 10% 176,0 242,0 3230 230/240 17 400 ± 10% 184,0 253,0 28.01.2014 Coil code Table 1 2 Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected] www.relpol.com.pl RY2 miniature industrial relays AC1 28.01.2014 N - electrical life at AC1 2 CO Note: the indicated polarity of the supply refers to the relays with extra equipment D - surge suppression element (diode) - for DC coils only. 3 Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected] www.relpol.com.pl RY2 miniature industrial relays Mounting Relays RY2 are offered in versions: • standard, for plug-in sockets • with mounting flange in the upper wall of the cover. Relays RY2 are designed for: • screw terminals plug-in sockets GZY2G with clips GZY2G-0041 ❶, 35 mm rail mount acc. to PN-EN 60715 or on panel mounting with two M3 screws • flat insert connectors - faston 187 (4,8 x 0,5 mm), relays are direct on panel mounting with two M3 screws - cover with mounting flange. ❶ For each GZY2G socket a set of two GZY2G-0041 clips shall be ordered. Ordering codes Cover protection category Type Contact material Number and type of contacts R Y 2 — Connection mode — Coil code — Additional features — Contact material 10 - AgCdO 20 - AgNi see Tables 1, 2, 3 page 2 Number and type of contacts 12 - 2 CO Cover protection category 2 - in cover, IP 40 version 4 - in cover with mounting flange, IP 40 version Connection mode 6 - for flat insert connectors - faston 187 (4,8 x 0,5 mm) and for plug-in sockets Additional features ❷ without marks - without additional features L - light indicator (LED diode) D - surge suppression element (diode) LD - light indicator (LED diode) + surge suppression element (diode) ❷ D, LD - only for DC coils Note: For relays with additional features D - surge suppression element (diode) (versions D and LD) - fixed supply polarity compulsory for the DC load of coils: +A1(7) / -A2(8). The polarity is indicated on the relay cover. For other versions of the relays with DC coils any polarity is possible. RY2-2012-26-1024relay RY2, for plug-in sockets, two changeover contacts, contact material AgNi, coil voltage 24 V DC, in cover IP 40 RY2-2012-26-5230-Lrelay RY2, for plug-in sockets, two changeover contacts, contact material AgNi, coil voltage 230 V AC 50/60 Hz, with light indicator (LED diode), in cover IP 40 RY2-1012-46-3230relay RY2, for flat insert connectors - faston 187 (4,8 x 0,5 mm), two changeover contacts, contact material AgCdO, coil voltage 230/240 V AC 50 Hz, in cover with mounting flange, IP 40 version 28.01.2014 Examples of ordering codes: 4 Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected] www.relpol.com.pl Plug-in sockets and accessories GZY2G For RY2 Screw terminals Max. tightening moment for the terminal: 0,7 Nm 35 mm rail mount acc. to PN-EN 60715 or on panel mounting 78,7 x 28 x 32,4 mm Two poles 12 A, 250 V AC Connection diagram Dimensions NC NO COM COIL Accessories GZY2G-0041 GZY2G PRECAUTIONS: 1. Ensure that the parameters of the product described in its specification provide a safety margin for the appropriate operation of the device or system and never use the product in circumstances which exceed the parameters of the product. 2. Never touch any live parts of the device. 3. Ensure that the product has been connected correctly. An incorrect connection may cause malfunction, excessive heating or risk of fire. 4. In case of any risk of any serious material loss or death or injuries of humans or animals, the devices or systems shall be designed so to equip them with double safety system to guarantee their reliable operation. 28.01.2014 Screw terminals plug-in sockets for RY2 5 Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected] www.relpol.com.pl