V585ME30-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Test Equipment • Satcom • CATV Headend £(f) (dBc/Hz) 14118 Stowe Drive, Suite B Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 800 Phase Noise @ 10 kHz offset (1 Hz BW) Harmonic Suppression (2nd) Tuning Voltage Typ Max Units 1600 MHz -101 dBc/Hz -5 dBc 1 21 MHz/V 60 Tuning Sensitivity (avg.) 11 dBm 100 pF Pushing 3 MHz/V Pulling (12 dB Return Loss, Any Phase) 8 MHz 85 °C Max Units Power Output 5 Load Impedance 8 Vdc 50 Input Capacitance Operating Temperature Range -40 Package Style Power Supply Requirements Supply Voltage (Vcc, nom.) Supply Current (Icc) MINI-14S Min Typ 11.5 16 Vdc 19 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B Voltage-Controlled Oscillator Surface Mount Module V585ME30-LF Rev A1 Tuning Curve, typ. FREQUENCY (MHz) 1900 1700 1500 85 °C 25 °C 1300 1100 -40 °C 900 700 500 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 20 18 16 14 12 10 0.030 MIN. CUTBACK FROM LIVE PADS 8 6 4 2 0 621 792 937 1075 1203 1322 1432 1531 1619 1698 1766 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND PACKAGE H MINI-14S 0.220 MINI-14S-LOW 0.160 MINI-14S-L 0.130 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B