Formosa MS Axial Leaded Schottky Barrier Rectifier SR5150 THRU SR5200 List List................................................................................................. 1 Package outline............................................................................... 2 Features.......................................................................................... 2 Mechanical data............................................................................... 2 Maximum ratings .............................................................................. 2 Rating and characteristic curves........................................................ 3 Pinning information........................................................................... 4 Marking........................................................................................... 4 Taping & bulk specifications for AXIAL devices.................................... 4 Suggested thermal profiles for soldering processes............................. 5 High reliability test capabilities........................................................... 6 http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Page 1 Document ID Issued Date Revised Date DS-22260T 2008/02/10 2010/03/10 Revision B Page. 6 Formosa MS Axial Leaded Schottky Barrier Rectifier SR5150 THRU SR5200 5.0A Axial Leaded Schottky Barrier Rectifiers - 150V-200V Features Package outline • Axial lead type devices for through hole design • Low power loss, high efficiency. • High current capability, l ow forward voltage drop. • High surge capability. • Guardring for overvoltage protection. • Ultra high-speed switching. • Silicon epitaxial planar chip, metal silicon junction. • Lead-free parts meet environmental standards of • DO-201AD 1.0(25.4) MIN. .220(5.6) MIL-STD-19500 /228 Suffix"-H" for Halogen-free part, ex.SR5150-H .197(5.0) DIA. .375(9.5) .285(7.2) Mechanical data • Epoxy : UL94-V0 rated flame retardant • Case : Molded plastic, DO-201AD • Lead : Axial leads, solderable per MIL-STD-202, 1.0(25.4) MIN. .052(1.3) .048(1.2) DIA. Method 208 guranteed • Polarity: Color band denotes cathode end • Mounting Position : Any • Weight : Approximated 1.10 gram Dimensions in inches and (millimeters) Maximum ratings and Electrical Characteristics (AT PARAMETER o T A=25 C unless otherwise noted) Symbol CONDITIONS Forward rectified current See Fig.2 Forward surge current 8.3ms single half sine-wave (JEDEC methode) MIN. TYP. O V R = V RRM T J = 100 C Thermal resistance Diode junction capacitance Junction to ambient Junction to lead f=1MHz and applied 4V DC reverse voltage Storage temperature SYMBOLS *1 V RRM (V) 5.0 A I FSM 150 A *3 VR (V) *4 VF (V) SR5150 150 105 150 0.90 SR5200 200 140 200 0.92 http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Operating temperature T J, ( OC) -55 to +150 0.1 IR 50 R θJA R θJL 25 10 380 CJ T STG V RMS*2 (V) UNIT IO O V R = V RRM T J = 25 C Reverse current MAX. -65 mA O C/W pF +175 O C *1 Repetitive peak reverse voltage *2 RMS voltage *3 Continuous reverse voltage *4 Maximum forward voltage@I F=5.0A Page 2 Document ID Issued Date Revised Date DS-22260T 2008/02/10 2010/03/10 Revision B Page. 6 Rating and characteristic curves (SR5150 THRU SR5200) FIG.1-TYPICAL FORWARD CURRENT DERATING CURVE FIG.2-TYPICAL FORWARD AVERAGE FORWARD CURRENT,(A) CHARACTERISTICS 6.0 0 0 20 40 60 80 100 120 140 160 180 200 LEAD TEMPERATURE,(°C) FIG.3-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 50 00 52 1.0 5.0 SR 2.0 10 51 3.0 SR 4.0 INSTANTANEOUS FORWARD CURRENT,(A) 5.0 1.0 0.1 o TJ=25 C Pulse Width 300us 1% Duty Cycle .01 120 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 FORWARD VOLTAGE,(V) 90 8.3ms Single Half TJ=25 C Sine Wave 60 JEDEC method 30 FIG.5 - TYPICAL REVERSE 0 1 5 50 10 CHARACTERISTICS 100 10 NUMBER OF CYCLES AT 60Hz TJ=100°C REVERSE LEAKAGE CURRENT, (mA) FIG.4-TYPICAL JUNCTION CAPACITANCE 1400 JUNCTION CAPACITANCE,(pF) PEAK FORWARD SURGE CURRENT,(A) 150 1200 1000 800 600 400 1 TJ=75°C 0.1 0.01 TJ=25°C 200 0 .01 .05 .1 .5 1 5 10 50 100 REVERSE VOLTAGE,(V) http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 0.001 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) Page 3 Document ID Issued Date Revised Date DS-22260T 2008/02/10 2010/03/10 Revision B Page. 6 Formosa MS Axial Leaded Schottky Barrier Rectifier SR5150 THRU SR5200 Pinning information Pin Pin1 Pin2 Simplified outline cathode anode Symbol 1 2 1 2 Marking Type number SR5150 SR5200 Marking code SR5150 SR5200 Taping & bulk specifications for AXIAL devices 52.4mm 17mm DIA. 55mm Max. A 17mm DIA. 72mm DIA. 71mm Max. 355mm OFF Center both sids 1.0mm Max OFF Alignment 1.2mm 6.3mm REEL PACKING DEVICE Q'TY 1 COMPONENT CARTON Q'TY 2 APPROX. CASE (PCS / REEL) SPACING SIZE (PCS / CARTON) CROSS "A" in FIG. A (m/m) 10 mm 380 * 340 * 370 TYPE DO-201AD 1,200 WEIGHT(kg) 4,800 9.1 AMMO PACKING DEVICE Q'TY 1 INNER CARTON Q'TY 2 APPROX. CASE (PCS / BOX) BOX SIZE SIZE (PCS / CARTON) CROSS (m/m) (m/m) TYPE DO-201AD 1,200 http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 260 * 83 * 160 440 * 270 * 340 Page 4 WEIGHT(kg) 12,000 17.0 Document ID Issued Date Revised Date DS-22260T 2008/02/10 2010/03/10 Revision B Page. 6 Formosa MS Axial Leaded Schottky Barrier Rectifier SR5150 THRU SR5200 BULK PACKING DEVICE Q'TY 1 INNER CARTON Q'TY 2 APPROX. CASE (PCS / BOX) BOX SIZE SIZE (PCS / CARTON) CROSS TYPE (m/m) DO-201AD 500 WEIGHT(kg) (m/m) 305 * 73 * 40 347 * 320 * 271 12,000 16.4 Suggested thermal profiles for soldering processes 1.Lead free temperature profile wave-soldering 280 Peak soldering temperature not to exceed 260ºC 260 240 220 Temperature(°C) 200 180 160 140 120 Peak Max well time 5 Max 100 80 Cool Down Max gradient-4ºC/s Suggested gradient - 2ºC/s or less 60 40 20 Preheat Max gradient 2ºC/s 0 0 20 40 60 80 100 120 140 160 180 200 220 240 Time(Sec) http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Page 5 Document ID Issued Date Revised Date DS-22260T 2008/02/10 2010/03/10 Revision B Page. 6 Formosa MS Axial Leaded Schottky Barrier Rectifier SR5150 THRU SR5200 High reliability test capabilities Item Test Conditions 1. Solder Resistance at 260±5 C for 10±2sec. immerse body into solder 1/16"±1/32" 2. Solderability at 245±5 C for 5 sec. 3. Pull Test 2.0kg in axial lead direction for 10 sec. I F=I O 4. Bend Lead 5. High Temperature Reverse Bias Reference o MIL-STD-750D METHOD-2031 MIL-STD-202F METHOD-208 o MIL-STD-202F METHOD-211A 2.0kg weight applied to each lead bending o o arc 90 ±5 for 3 times MIL-STD-202F METHOD-211A o V R=80% rate at T J=150 C for 168 hrs. MIL-STD-750D METHOD-1038 MIL-STD-750D METHOD-1027 o 6. Forward Operation Life Rated average rectifier current at T A=25 C for 500hrs. O 7. Intermittent Operation Life T A = 25 C, I F = I O On state: power on for 5 min. off state: power off for 5 min, on and off for 500 cycles. MIL-STD-750D METHOD-1036 JESD22-A102 o 8. Pressure Cooker 15P SIG at T A=121 C for 4 hrs. 9. Temperature Cycling -55 C to +125 C dwelled for 30 min. and transferred for 5min. total 10 cycles. 10. Forward Surge 8.3ms single half sine-wave one surge. MIL-STD-750D METHOD-4066-2 11. Humidity o at T A=85 C , RH=85% for 1000hrs. MIL-STD-750D METHOD-1021 12. High Temperature Storage Life o at 175 C for 1000 hrs. MIL-STD-750D METHOD-1031 o http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 MIL-STD-750D METHOD-1051 o Page 6 Document ID Issued Date Revised Date DS-22260T 2008/02/10 2010/03/10 Revision B Page. 6