yageo.com

Product Specification – April 21, 2015 V.10
DATA SHEET
CHIP RESISTORS
Packing
Product specification
Chip Resistor Surface Mount
2
7
Packing
PACKING
TAPE AND REEL SPECIFICATIONS
All tape and reel specifications are in accordance with “IEC 60286-3”. Basic dimensions are given in Figs 1, 2 and
5, and Tables 1, 2 and 3.
PAPER
R/PE TAPE
ADVANTAGE - PE TAPE
MATERIAL CHARACTERISTIC - PE TAPE

Better anti-moisture

Less fiber

Meet “ISO 14000”
environmental regulation

PE is a polymer material commonly
used for food containers, plastic
bags and toys, so is safe for human
beings. In addition, it is recyclable.

Conform to “ISO14000”
environmental packing and
American F.D.A restraint
regulations.
Fig. 1 Paper/PE tape
Table 1 Dimensions of paper/PE tape for relevant chip resistors size; see Fig.1
PRODUCT SIZE SYMBOL
CODE
A0
B0
W
E
F
P0
Unit: mm
P1
P2
ØD0
T
0075
0.17±0.02
0.32±0.02
4.0±0.05
0.90±0.05
1.80±0.02
2.0±0.04
1.0±0.02
1.0±0.02
0.8±0.04
0.14±0.02
0100
0.24±0.03
0.45±0.03
8.0±0.20
1.75±0.10
3.5±0.05
4.0±0.10
2.0±0.05
2.0±0.05
1.5+0.1/–0
0.33±0.10
0201
0.35 ±0.10
0.65 ±0.10
8.0 ±0.20
1.75 ±0.10
3.5 ±0.05
4.0 ±0.10
2.0 ±0.05
2.0 ±0.05
1.5 +0.1/-0 0.35 ±0.10(1)
0402
0.65 ±0.10
1.15 ±0.10
8.0 ±0.20
1.75 ±0.10
3.5 ±0.05
4.0 ±0.10
2.0 ±0.05
2.0 ±0.05
1.5 +0.1/-0 0.53 ±0.10
0603
1.10 ±0.10
1.90 ±0.10
8.0 ±0.20
1.75 ±0.10
3.5 ±0.05
4.0 ±0.10
4.0 ±0.05
2.0 ±0.05
1.5 +0.1/-0 0.70 ±0.10
0805
1.65 ±0.10
2.40 ±0.10
8.0 ±0.20
1.75 ±0.10
3.5 ±0.05
4.0 ±0.10
4.0 ±0.05
2.0 ±0.05
1.5 +0.1/-0 0.85 ±0.10
1206
1.90 ±0.10
3.50 ±0.10
8.0 ±0.20
1.75 ±0.10
3.5 ±0.05
4.0 ±0.10
4.0 ±0.05
2.0 ±0.05
1.5 +0.1/-0 0.85 ±0.10
1210
2.80 ±0.10
3.50 ±0.10
8.0 ±0.20
1.75 ±0.10
3.5 ±0.05
4.0 ±0.10
4.0 ±0.05
2.0 ±0.05
1.5 +0.1/-0 0.85 ±0.10
0.71±0.05
0.9±0.10
8.0±0.10
1.75±0.10
3.5±0.05
4.0±0.05
2.0±0.1 0
2.0±0.05
1.55±0.1
0.43±0.10
2 x 0201 M (4P2R) 0.71±0.05
0.71±0.05
4 x 0201 (8P4R)
0.9±0.10
8.0±0.10
1.75±0.10
3.5±0.05
4.0±0.05
2.0±0.1 0
2.0±0.05
1.55±0.1
0.33±0.10
1.57±0.10
8.0±0.10
1.75±0.1
3.5±0.05
4.0±0.05
2.0±0.1 0
2.0±0.05
1.55±0.1
0.43±0.10
4 x 0201 M (8P4R) 0.71±0.05
1.57±0.10
8.0±0.10
1.75±0.1
3.5±0.05
4.0±0.05
2.0±0.1 0
2.0±0.05
1.55±0.1
0.33±0.10
0404/ 2 × 0402
1.20 ±0.10
1.20 ±0.10
8.0 ±0.20
1.75 ±0.10
3.5 ±0.05
4.0 ±0.10
2.0 ±0.05
2.0 ±0.05
1.5 +0.1/-0 0.53 ±0.10
2 x 0603 (4P2R)
2.00 ±0.10
2.00 ±0.10
8.0 ±0.20
1.75 ±0.10
3.5 ±0.05
4.0 ±0.10
4.0 ±0.10
2.0 ±0.05
1.5 +0.1/-0 0.85 ±0.05
4 × 0402
1.20 ±0.10
2.20 ±0.10
8.0 ±0.20
1.75 ±0.10
3.5 ±0.05
4.0 ±0.10
2.0 ±0.05
2.0 ±0.05
1.5 +0.1/-0 0.70 ±0.10
4 × 0603
2.00 ±0.10
3.50 ±0.10
8.0 ±0.20
1.75 ±0.10
3.5 ±0.05
4.0 ±0.10
4.0 ±0.05
2.0 ±0.05
1.5 +0.1/-0 0.85 ±0.10
0616 (16P8R)
1.80 ±0.20
4.40 ±0.20
12.0 ±0.30
1.75 ±0.10
5.5 ±0.05
4.0 ±0.10
4.0 ±0.05
2.0 ±0.05
1.5 +0.1/-0 0.70 ±0.10
0612 (10P8R)
2.00 ±0.10
3.50 ±0.10
8.0 ±0.20
1.75 ±0.10
3.5 ±0.05
4.0 ±0.10
4.0 ±0.05
2.0 ±0.05
1.5 +0.1/-0 0.85 ±0.10
2 x 0201 (4P2R)
(2)
(2)
NOTE
1. For size 0201, the typical value of thickness (excluding cover tape) is 0.42 mm for paper tape and 0.33 mm for PE tape.
2. M is reversed type.
www.yageo.com
Apr. 21, 2015 V.10
Product specification
Chip Resistor Surface Mount
3
7
Packing
EMBOSSED/BLISTER TAPE
ENVIRONMENTAL CONSIDERATIONS

Cover tape, carrier tape and
reel do not contain
environmentally harmful PVC
materials.

Cover tape and reel are
antistatic.

Because the carrier tape is
made of polycarbonate, a
homogeneous material (monoplastic), it is ideally suited for
recycling.

Compared to other PVC-free
materials polycarbonate shows
excellent stiffness and very
little deformation with
temperature.
EMBOSSED/BLISTER TAPE
Fig. 2 Embossed/blister tape
Table 2 Dimensions of embossed/blister tape for relevant chip resistors size; see Fig.2
PRODUCT SYMBOL
SIZE CODE A0
B0
W
E
F
P0
P1
P2
Unit: mm
ØD0
ØD1
T
1218
3.50 ±0.20 4.80 ±0.20 12 ±0.20 1.75 ±0.10 5.5 ±0.05 4.0 ±0.10 4.0 ±0.10 2.0 ±0.05 1.5 +0.1/-0 1.50 +0.25/-0 1.0 ±0.10
2010
2.80 ±0.20 5.40 ±0.20 12 ±0.20 1.75 ±0.10 5.5 ±0.05 4.0 ±0.10 4.0 ±0.10 2.0 ±0.05 1.5 +0.1/-0 1.50 +0.25/-0 1.0 ±0.10
2512
3.50 ±0.20 6.70 ±0.20 12 ±0.20 1.75 ±0.10 5.5 ±0.05 4.0 ±0.10 4.0 ±0.10 2.0 ±0.05 1.5 +0.1/-0 1.50 +0.25/-0 1.0 ±0.10
1220 (8P4R)
3.20 ±0.20 5.60 ±0.20 12 ±0.20 1.75 ±0.10 5.5 ±0.05 4.0 ±0.10 4.0 ±0.10 2.0 ±0.05 1.5 +0.1/-0 1.50 +0.25/-0 1.0 ±0.10
1225 (10P8R) 3.50 ±0.20 6.70 ±0.20 12 ±0.20 1.75 ±0.10 5.5 ±0.05 4.0 ±0.10 4.0 ±0.10 2.0 ±0.05 15+ 0.1/-0 1.50 +0.25/-0 1.0 ±0.10
www.yageo.com
Apr. 21, 2015 V.10
Product specification
Chip Resistor Surface Mount
4
7
Packing
LEADER/TRAILER TAPE SPECIFICATION
Fig. 3 Leader/trailer tape
TAPING REQUIREMENTS

Resistance side faces up.

Component is free and not sticking to top and/or bottom tape.

Component should be easy to remove from carrier tape and the chip cavity should have no mechanical
damage.
PEEL-OFF FORCE
Peel-off forces of both paper/PE and embossed/blister tapes are in accordance with “IEC 60286-3”; that is, at a
peel-off speed of 300 ±10 mm/minute, 0.1 N to 1.0 N for 8 mm tape and 0.1 N to 1.3 N for tape larger than 8
mm. The peel-off angle should be between 165° and 180°.
Fig. 4 Peel-off force
www.yageo.com
Apr. 21, 2015 V.10
Product specification
Chip Resistor Surface Mount
5
7
Packing
REEL SPECIFICATION
Fig. 5 Reel
Table 3 Dimensions of reel specification for relevant chip resistors size; see Fig.5
REEL SIZE
PRODUCT QUANTITY
SIZE CODE
PER REEL 8 mm tape width 12 mm tape width
0075
20,000
20,000
0100
A
N
C
D
W1 W2 max.
--7" (Ø178 mm)
40,000
80,000
unit: mm
SYMBOL
--- 180 +0/-3
60 +1/-0 13.0 ±0.2
9.0 ±0.2 12.0 ±0.2
--13" (Ø330 mm)
--- 330 +0/-3
100 ±0.5 13.5 ±0.5
10.0 ±0.5 14.0 ±0.5
7" (Ø178 mm)
--- 180 +0/-3
60 +1/-0 13.0 ±0.2
9.0 ±0.2 12.0 ±0.2
13" (Ø330 mm)
--- 330 +0/-3
100 ±0.5 13.5 ±0.5
10.0 ±0.5 14.0 ±0.5
7" (Ø178 mm)
--- 180 +0/-3
60 +1/-0 13.0 ±0.2
9.0 ±0.2 12.0 ±0.2
20,000
10" (Ø254 mm)
--- 254 +0/-3
13.0 ±0.2
50,000
13" (Ø330 mm)
--- 330 +0/-3
10,000
0201
15,000
20,000
50,000
10,000
0402
20,000
100 ±0.5
21.0 ±0.8
9.8 ±0.5 13.0 ±0.5
13.5 ±0.5
10.0 ±0.5 14.0 ±0.5
5,000
7" (Ø178 mm)
--- 180 +0/-3
60 +1/-0 13.0 ±0.2
9.0 ±0.2 12.0 ±0.2
10,000
10" (Ø254 mm)
--- 254 +0/-3
13.0 ±0.2
9.8 ±0.5 13.0 ±0.5
20,000
13" (Ø330 mm)
--- 330 +0/-3
13.5 ±0.5
10.0 ±0.5 14.0 ±0.5
5,000
7" (Ø178 mm)
--- 180 +0/-3
60 +1/-0 13.0 ±0.2
9.0 ±0.2 12.0 ±0.2
20,000
13" (Ø330 mm)
--- 330 +0/-3
100 ±0.5 13.5 ±0.5
10.0 ±0.5 14.0 ±0.5
1218
4,000
---
7" (Ø178 mm) 180 +0/-3
2010
4,000
---
7" (Ø178 mm) 180 +0/-3
60 +1/-0 13.5 ±0.5
13.6 ±0.5 16.5 ±0.5
2512
4,000
---
7" (Ø178 mm) 180 +0/-3
0603/
0805/1206
1210
100 ±0.5
www.yageo.com
Apr. 21, 2015 V.10
Product specification
Chip Resistor Surface Mount
6
7
Packing
Table 4 Dimensions of reel specification for relevant chip resistor size; see Fig.5 (continued)
PRODUCT
SIZE CODE TYPE
REEL SIZE
QUANTITY
PER REEL 8 mm tape width 12 mm tape width
unit: mm
SYMBOL
A
N
C
D
W1 W2 max.
0404
ATV321
10,000
7" (Ø178 mm)
--- 180 +0/-3 60 +1/-0 13.0 ±0.2
9.0 ±0.2 12.0 ±0.2
2 x 0201 &
2 x 0201 M
(4P2R)
YC102
10,000
7" (Ø178 mm)
--- 180 +0/-3 60 +1/-0 13.0 ±0.2
9.0 ±0.2 12.0 ±0.2
4 x 0201 &
4 x 0201 M
(8P4R)
YC104
10,000
7" (Ø178 mm)
--- 180 +0/-3 60 +1/-0 13.0 ±0.2
9.0 ±0.2 12.0 ±0.2
2 × 0402
(4P2R)
YC/TC122
10,000
7" (Ø178 mm)
--- 180 +0/-3 60 +1/-0 13.0 ±0.2
9.0 ±0.2 12.0 ±0.2
50,000
13" (Ø330 mm)
--- 330 +0/-3 100 ±0.5 13.5 ±0.5
10.0 ±0.5 14.0 ±0.5
10,000
7" (Ø178 mm)
--- 180 +0/-3 60 +1/-0 13.0 ±0.2
9.0 ±0.2 12.0 ±0.2
40,000
13" (Ø330 mm)
10,000
7" (Ø178 mm)
--- 180 +0/-3 60 +1/-0 13.0 ±0.2
9.0 ±0.2 12.0 ±0.2
5,000
7" (Ø178 mm)
--- 180 +0/-3 60 +1/-0 13.0 ±0.2
9.0 ±0.2 12.0 ±0.2
20,000
13" (Ø330 mm)
--- 330 +0/-3 100 ±0.5 13.5 ±0.5
10.0 ±0.5 14.0 ±0.5
4 × 0402
(8P4R)
YC/TC124
2 x 0603
(4P2R)
YC/TC162
4 × 0603
(8P4R)
YC/TC164
1220 (8P4R)
YC324
4,000
---
7" (Ø178 mm) 180 +0/-3 60 +1/-0 13.5 ±0.5
13.6 ±0.5 16.5 ±0.5
0616 (16P8R) YC248
4,000
---
7" (Ø178 mm) 180 +0/-3 60 +1/-0 13.0 ±0.5
13.6 ±0.5 16.5 ±0.5
0612 (10P8R) YC158
1225 (10P8R) YC358
--- 330 +0/-3 100 ±0.5 13.5 ±0.5 21.0 ±0.8 10.0 ±0.5 14.0 ±0.5
5,000
7" (Ø178 mm)
--- 180 +0/-3 60 +1/-0 13.0 ±0.2
9.0 ±0.2 12.0 ±0.2
20,000
13" (Ø330 mm)
--- 330 +0/-3 100 ±0.5 13.5 ±0.5
10.0 ±0.5 14.0 ±0.5
4,000
---
7" (Ø178 mm) 180 +0/-3 60 +1/-0 13.5 ±0.5
13.6 ±0.5 16.5 ±0.5
www.yageo.com
Apr. 21, 2015 V.10
Product specification
Chip Resistor Surface Mount
7
7
Packing
REVISION HISTORY
REVISION
DATE
CHANGE NOTIFICATION
DESCRIPTION
Version 10
Apr. 21, 2015
-
- 0075 packing information added
Version 9
Feb. 19, 2014
-
- 0100, 2 x 0201, 4 x 0201 packing information added
Version 8
Jan 20, 2011
-
- Packing specifications for size 0201updated
- Taping reel -10" reel for size 0201 removed
Version 7
Dec 21, 2010
-
- Extended quantity per reel for size 0201 and 0402
Version 6
Apr 03, 2008
-
- Size 2 x 0603 extended and updated in PE tape and
reel specification
- Updated Fig. 3 for leader/trailer tape specification
Version 5
Nov 16, 2004
-
- PE tape added
- Bulk-case removed.
- Yageo /Phycomp brand combined
Version 4
Jul 25, 2003
-
- Updated company logo
Version 3
Jul 16, 2001
-
- 0201 packing information added
Version 2
May 30, 2001
-
- Converted to Phycomp brand
www.yageo.com
Apr. 21, 2015 V.10