8 D 6 7 5 4 2 3 NOTES 1. ROHS COMPLIANT. 2. UL 94V-2 FLAMMABILITY RATING. -40 C TO 85 C OPERATING TEMPERATURE. 3. SUITABLE FOR LIGHT PIPE WITH 2.2MM JACKET AND OPTICAL CORE NO GREATER 4. THAN 1.5MM. 5. DO NOT WAVE SOLDER WITH THIS DEVICE. 6. FOR BEST RESULTS USE ONLY NARROW VIEWING ANGLE NON-DIFFUSED LEDS WITH OUTPUT POWER GREATER THAN 100mcd. ECN # 176 200 1 REVISIONS REV DESCRIPTION INITIAL RELEASE 001 002 REVISED PER ECR 100610KH01 DATE 8/3/10 10/6/10 INITIALS KH KH D .087 (2.210mm) TRIMMED FIBER OPTIC JACKET .06±.02 (1.52mm 0.51) 3 .193 (4.902mm) PRESS FIBER OPTIC IN C C .197 (5.004mm) .161 (4.089mm) 1 3MM LED B .220 .210 5.588mm 5.334mm CLIP ONTO LED .114 (2.896mm) .492 (12.497mm) B .039 (.991mm) .157 (3.988mm) .276 (7.010mm) 2X .035 (0.889mm) 2 SOLDER IN PLACE .193 (4.902mm) UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES: ANGLES 1/2" A FINISH 128 BREAK ALL CORNERS AND SHARP EDGES .030 MAX LIGHT PIPE PREPARATION AND SEQUENCE OF ASSSEMBLY .098 (2.261mm) LIGHT PIPE AS ASSEMBLED 7 6 5 VISUAL COMMUNICATIONS COMPANY, INC. NYLON 6/6 UL 94-V2 190 Bosstick Boulevard, Suite101 San Marcos, CA 92069 USA Phone (760) 560-1300 Fax (760) 560-1301 email [email protected] FINISH TITLE: SEE NOTES APPROVAL THROUGH-HOLE LED MOUNT DATE THIRD ANGLE PROJECTION RECOMMENDED PWB DEVICE LAYOUT 8 MATERIAL DECIMALS .X .020 .010 .XX .XXX .005 PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF VISUAL COMMUNICATIONS COMPANY, INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF VISUAL COMMUNICATIONS COMPANY, INC IS PROHIBITED. 4 3 DRAWN K.Howard 8/3/10 CHECKED DPZ 8/10/10 SIZE SCALE: 4:1 DO NOT SCALE DRAWING 2 REV DWG. NO. B THR 22 002 SHEET 1 OF 1 1 A