FMAB RAIL 1-Phase Line Filters www.schurter.com/PG84 AC Filter, DIN Rail Mounting Description Characteristics Approvals Weblinks -Chassis: DIN rail mounting -Line filter in industrial version, 1 stage, high attenuation -Especially effective against asymmetrical interferences in the frequency range from 100kHz up to 30MHz -Protection against interference voltage from the mains Possible interferences generated in the equipment are strongly attenuated -Especially designed for electric switch and control cabinets -Suitable for use in equipment according to IEC/UL 60950 -VDE Certificate Number: 40030734 -UL File Number: E72928 pdf-datasheet, html-datasheet, General Product Information, Approvals, CE declaration of conformity, RoHS, CHINA-RoHS, REACH, e-Shop, SCHURTER-Stock-Check, Distributor-Stock-Check, Detailed request for product Technical Data Ratings IEC Ratings UL/CSA Leakage Current Dielectric Strength Allowable Operation Temp. Climatic Category Degree of Protection Protection Class Terminal Material: Housing 10 - 20 A @ Ta 40 °C / 250 VAC; 50 Hz 10 - 20 A @ Ta 40 °C / 125/250 VAC; 60 Hz industrial < 2.1 mA (250 V / 50 Hz) 1.7 kVDC between L-N 2.7 kVDC between L/N-PE Test voltage (2 sec) -25 °C to 100 °C 25/100/21 acc. to IEC 60068-1 IP 20 IEC 60529 Suitable for appliances with protection class I acc. to IEC 61140 Bolts and nuts M4, Quick connect terminal for PE Metal Line Filter MTBF Industrial Version, IEC 60939, UL 1283, CSA C22.2 no. 8 Technical Details > 200'000 h acc. to MIL-HB-217 F Connectors 1 FMAB RAIL 1-Phase Line Filters www.schurter.com/PG84 Dimension max. 61 (6.5) 4) L 1) N (75) 3) 2) N' 27 max. 48 16 L' max. 102 EN 60715 35x7.5 24.5 11.5 max. 61 1) Line 2) Load 3) Tightening torque 0.6-0.8 Nm, Screw 4mm² 4) Quick connect terminal 6.3x0.8mm Diagrams 1) 2) 1) Line 2) Load Attenuation Loss . . . . . 0.1/100Ω differential mode Industrial version 10 A 20 A 2 Connectors ........... 100/0.1Ω differential mode - - - - differential mode _____ common mode FMAB RAIL 1-Phase Line Filters www.schurter.com/PG84 All Variants Rated Current [A] Leakage Current [mA] 1) L [mH] C1 (X2) [nF] C2 (Y2) [nF] Weight [g] Screw clamps [mm2] 2) 10 20 Order Number 2.1 2x1 68 22 358 g 4 5500.2261 2.1 2 x 0.15 68 22 380 g 4 5500.2262 Availability for all products can be searched real-time:http://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER 1) Leakage current acc. IEC60950 - 5.2.3 - Annex D (situation when neutral is interrupted) 2) Maximum conductor cross section (wire gauge) to be used; a comparative table for AWG and mm² values can be found in the general product information www.schurter.com/emc_info 5 Pcs 04.03.2015 Packaging unit The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. Connectors 3