ZIOL2411 IO-Link compliant HV Line Driver (Dual Channel) Brief Description The ZIOL2411 is a line driver/level shifter IC that provides two independent HV* I/O channels with a wide range of configurable system features. It addresses the physical layer of sensor/actuator systems in factory automation applications and is specifically designed to support the communication † standard IO-Link . Benefits The output drivers are push-pull stages, which in tandem mode reach an RDSon of less than 3.3Ω at all operational temperatures. The configuration is stored in an on-chip EEPROM and automatically loaded into the ZIOL2411’s control register during power up. The ZIOL2411 also provides status information, such as overload and over-temperature conditions. An integrated SPI interface supports access to configuration and status registers. The ZIOL2411 is fabricated in a powerful CMOS mixed signal technology that allows supply voltages up to 40V. The EEPROM read/write functionality is guaranteed within the entire operating temperature range in combination with a low-voltage core supply of 3.3V. Features Configurable output current limits 56mA to 410mA per channel Standard cable driver/ physical layer transceiver for IO-Link (master and device) Slew-rate controlled drivers Wide range for configurable feature set, which is automatically loaded after power-on reset ‡ IO-Link-specific WURQ detection On chip registers and EEPROM for system configuration and status information SPI interface for accessing on-chip registers and EEPROM Digital interface: 3.3V output, 5V tolerant inputs IC temperature monitoring/diagnosis Over-current and over-temperature indication Configurable feature set Nonvolatile storage of system configuration Excellent electromagnetic compatibility (EMC) performance due to adjustable output slew rate control Low RDSon of 3.3Ω in tandem mode Programmable limitation of driver output current EEPROM read/write functionality within entire operating temperature range Space saving 4x4 mm² 24-pin QFN Available Support Evaluation Kits Application Notes Physical Characteristics Operation temperature: -40 to +85 °C Supply voltage 8.0 to 36.0 V RoHS-compliant QFN-24 package ZIOL2411 Application Circuits sensor ZIOL2411 SIO sensor ZIOL2411 IO-L actuator ZIOL2411 IO-L Traditional PLC ZIOL24x1 ZIOL24x1 IO-Link PLC (master) sensor ZIOL2411 sensor ZIOL2411 IO-L ZIOL24x1 * High voltage (maximum power supply / signal swing is 36 volt) † ZMDI is a member of the IO-Link Consortium: www.io-link.com ‡ IO-Link device wake-up For more information, contact ZMDI via [email protected]. © 2015 Zentrum Mikroelektronik Dresden AG — Rev. 2.20 — August 12, 2015 All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice. ZIOL2411 IO-Link compliant HV Line Driver (Dual Channel) Typical Applications ZIOL2411 Overview In field applications, the ZIOL2411 acts as a universal cable driver. The ZIOL2411 can support IO-Link communications as a physical-layer transceiver (PHY) for IO-Link devices and IO-Link masters. ZIOL2411 Configuration Diagnosis Common applications: Cable Side High Voltage (HV) Signals Application Side Low Voltage (LV) Signals 24V line driver/level shifter IO-Link-compliant devices IO-Link-compliant masters See the ZIOL2xxx IC Family Data Sheet for detailed technical information. Control Power Supply Dual channel transceiver COM Actuator, Sensor, or Interface to Host System Power RX/TX Ch 0 Application Circuit Ch 1 AUX RX/TX Cable GND Ordering Information Product Sales Code Description ZIOL2411BI1R Dual Channel IO-Link compliant HV Line Driver, 4x4mm QFN24 13” reel ZIOL2411BI1W Dual Channel IO-Link compliant HV Line Driver, 4x4mm QFN24 7” reel IO-Link Lab Kit V2.0 #3600100858 ZIOL2401 Lab Kit for detailed laboratory evaluation: configurable IC/Communication/Controller Board, USB cable; software is available for download from the http://www.zmdi.com\io-link-tools page with a free customer login (see data sheet for details). ZIOL2401 Starter-Kit #3600100369 ZIOL2401 Starter Kit for product demonstration: USB stick, extension board, downloadable software Sales and Further Information Package www.zmdi.com [email protected] Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA Central Office: Phone +49.351.8822.306 Fax +49.351.8822.337 USA Phone 1.855.275.9634 Phone +1.408.883.6310 Fax +1.408.883.6358 European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772 DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice. Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise. European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955 Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg. 4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan Phone +81.3.6895.7410 Fax +81.3.6895.7301 Phone +886.2.2377.8189 Fax +886.2.2377.8199 Zentrum Mikroelektronik Dresden AG, Korea Office U-space 1 Building Unit B, 906-1 660, Daewangpangyo-ro Bundang-gu, Seongnam-si Gyeonggi-do, 463-400 Korea Phone +82.31.950.7679 Fax +82.504.841.3026 © 2015 Zentrum Mikroelektronik Dresden AG — Rev. 2.20 — August 12, 2015 All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.