VER : A_1 update : 2015.03.16 DC-DC Brick BR130 SERIES 36/60/72/100/132 Watts DESCRIPTION KEY FEATURES Input under Voltage Protection Over Current Protection (Hiccup Mode) Short Circuit Protection (Hiccup Mode) Over Voltage Protection (Hiccup Mode) Over Temperature Protection (Self-recovery) Remote ON/OFF Control Remote Sense Output Voltage Trim UL60950-1 and CSA C22.2 No. 60950-1-07 Meet UL94V-0 Flammability Requirements Rohs6 Compliant Size: 2.28 x 1.45 x 0.38 Inches (others Model) 2.28 x 1.45 x 0.39 Inches (BR130-3.3S) 2.28 x 1.45 x 0.5 Inches (BR130-3.3SB) 3-Years Product Warranty The BR130 series is a new generation isolated DC-DC converter that uses an industry standard quarter-brick structure, and features high efficiency and power density, operates from an input voltage range of 36 V to 75 V, provides the rated output voltage of 1.2V / 1.5V / 1.8V / 2.5V / 3.3V and the maximum output current of 30A / 40A. BR130-1.2S / 1.5S / 1.8S / 2.5S / 3.3S BR130-3.3SB ELECTRICAL SPECIFICATIONS Conditions: TA = 25°C (77°F), Airflow = 1 m/s (200 LFM), Vin = 48 V, unless otherwise notes. BR130- Model No. Max Output Wattage (W) Voltage (V.DC.) Input Current (A) (max) No-Load Loss (W) (typ.) Voltage (V.DC.) Regulated Voltage Precision (max.) Current (A) (max.) Line Regulation (LL-HL) (typ.) Load Regulation (0-100%) (typ.) Output Ripple & Noise (peak to peak) (typ.) (Oscilloscope Bandwidth:20 MHz) Efficiency (typ.) 100% Load (Vin = 48 V; TA=25°C (77°F)) 50% Load 20% Load Over Power Protection Over Current Protection Over Voltage Protection Protection Short Circuit Protection (max.) Over Temperature Protection BR130- BR130- BR130- BR130- BR130- 1.2S 1.5S 36W 60W 48V (36~75V) 1.3A 2A 1W 2W 1.2V 1.5V 3% 30A 40A 0.2% 0.2% 0.2% 0.3% 1.8S 72W 2.5S 100W 3.3S 132W 3.3SB 2.4A 2W 1.8V 3.5A 3.5W 2.5V 4.5A 3.6W 3.3V 1% 1% 0.2% 0.3% 0.2% 0.3% 100 mV 100 mV 100 mV 120 mV 89.5% 90.5% 89.5% 91.5% ─ 87% Hiccup mode Hiccup mode 1.4~2.0V 1.8~2.5V 91.5% 92% 87% 92% 92% 86.5% 93.5% 93.5% 87.5% 2.2~3.0V 3.0~3.8V 3.9~4.7V (Hiccup mode) (Hiccup mode) (Hiccup mode) (Hiccup mode) 100 mV (Hiccup mode) Hiccup mode Threshold:115~135°C (typ.) / Hysteresis:5°C (min.) Self-recovery (The values are obtained by measuring the temperature 93.5% 93.5% ─ of the hottest power component on the top surface of the converter.) Isolation Environment Safety EMC Physical Other Voltage (V.DC.) Operating Temperature Storage Temperature Temperature Coefficient (max.) Humidity MTBF Agency Approvals EMI (Conducted & Radiated Emission) Dimension (L x W x H) Tolerance 0.5 mm Weight Remote On/Off Voltage On/Off Current http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 Low level (V.DC.) High level (V.DC.) Low level (mA) (max.) 1500 VDC (Functional Isolation) -40°C…+85°C -55°C…+125°C 0.02 % Vout / °C (TA = -40°C to +85°C (-40°F to +185°F )) 95% RH 2.5 1.5 1.5 1.5 1.5 2.5 Million Hr Million Hr Million Hr Million Hr Million Hr Million Hr (Telcordia SR332; 80% load; Airflow = 1.5m/s (300 LFM); TA = 40°C (104°F) CE, UL, TUV UL60950-1 and CSA C22.2 No. 60950-1-07 BR130-3.3SB: 2.28 x 1.45 x 0.5 Inches ( 57.9 x 36.8 x 12.7 mm ) BR130-3.3S: 2.28 x 1.45 x 0.39 Inches ( 57.9 x 36.8 x 9.8 mm ) others: 2.28 x 1.45 x 0.38 Inches ( 57.9 x 36.8 x 9.7 mm ) 38 g 38 g 38 g 38 g 40 g 58 g -0.7~1.2V 3.5~12V 1mA -1- VER : A_1 update : 2015.03.16 DC-DC Brick BR130 SERIES 36/60/72/100/132 Watts NOTE 1. During the test of input reflected ripple current, the input terminal must be connected to a 12uH inductor and a 220uF electrolytic capacitor. 2. Point B, which is for testing the output voltage ripple, is 25 mm (0.98 in.) away from the Vout(+) pin. http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 -2- VER : A_1 update : 2015.03.16 DC-DC Brick BR130 SERIES 36/60/72/100/132 Watts DERATING http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 -3- VER : A_1 update : 2015.03.16 DC-DC Brick BR130 SERIES 36/60/72/100/132 Watts MECHANICAL DIMENSION BR130-1.2S / BR130-1.5S / BR130-1.8S / BR130-2.5S / BR130-3.3S PIN# Single 1 +DC IN 2 ON / OFF CTL 3 -DC IN 4 -DC OUT 5 -Sense 6 TRIM 7 +Sense 8 +DC OUT Note 1. All dimensions in mm [in.] Tolerances: x.x ± 0.5 mm [x.xx ± 0.02 in.] x.xx± 0.25 mm [x.xxx ± 0.010 in.] 2. Pin 1-3, 5-7 are 1.00 ± 0.05 mm [0.040 ± 0.002 in.] diameter with 2.00 ± 0.10 mm [0.080 ± 0.004 in.] diameter standoff shoulders. Pin4 and pin8 are 1.50 ± 0.05 mm [0.060 ± 0.002 in.] diameter with 2.50 ± 0.10 mm [0.098 ± 0.004 in.] diameter standoff shoulders. http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 -4- VER : A_1 update : 2015.03.16 DC-DC Brick BR130 SERIES 36/60/72/100/132 Watts MECHANICAL DIMENSION BR130-3.3SB PIN# Single 1 +DC IN 2 ON / OFF CTL 3 -DC IN 4 -DC OUT 5 -Sense 6 TRIM 7 +Sense 8 +DC OUT Note 1. All dimensions in mm [in.] Tolerances: x.x ± 0.5 mm [x.xx ± 0.02 in.] x.xx± 0.25 mm [x.xxx ± 0.010 in.] 2. Pin 1-3, 5-7 are 1.00 ± 0.05 mm [0.040 ± 0.002 in.] diameter with 2.00 ± 0.10 mm [0.080 ± 0.004 in.] diameter standoff shoulders. Pin4 and pin8 are 1.50 ± 0.05 mm [0.060 ± 0.002 in.] diameter with 2.50 ± 0.10 mm [0.098 ± 0.004 in.] diameter standoff shoulders. 3. M3 Screw used to bolt unit’s baseplate to other surfaces (such as heatsink) must not exceed 3.00 mm (0.120 in.) depth below the surface of baseplate. http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 -5-