VER : A_1 update : 2015.03.16 DC-DC Brick BR360 SERIES 360 Watts DESCRIPTION KEY FEATURES Input under Voltage Protection Over Current Protection (Hiccup Mode) Short Circuit Protection (Hiccup Mode) Over Voltage Protection (Hiccup Mode) Over Temperature Protection (Self-recovery) Remote ON/OFF Control Remote Sense Output Voltage Trim Negative Logic:BR360-3.3S and BR360-12S Positive Logic:BR360-48S UL60950-1 and CSA C22.2 No. 60950-1-07 Meet UL94V-0 Flammability Requirements RoHS6 Compliant Size: 2.4 x 2.28 x 0.5 Inches 3-Years Product Warranty The BR360 series DC-DC converter are high-efficiency and power density standard 1/2 brick isolated models. This series contain 6 modules, output power from 100W to 360W, output voltage covering 3.3V, 5V, 12V and 48V four levels. All models support primary ON/OFF control, remote Sense and Trim function. This series which conform to the RoHS6 requirement can be used in the fields of communication, data transmission and distributed power supply system. ELECTRICAL SPECIFICATIONS Conditions: TA = 25°C (77°F), Airflow = 1.0 m/s (200 LFM), Vin = 48 V, Vout = 12 V , unless otherwise specified. Model No. Max Output Wattage (W) Voltage (V.DC.) Input Output Protection Current (A) (max) No-Load Loss (W) (typ.) Voltage Set Point (V.DC.) Current (A) (max.) Line Regulation (LL-HL) (typ.) Load Regulation (0-100%) (typ.) Ripple & Noise (peak to peak) (typ.) (Oscilloscope Bandwidth:20 MHz) Efficiency (typ.) 100% Load (Vin = 48 V; TA=25°C (77°F)) 50% Load 20% Load Over Power Protection Over Current Protection Over Voltage Protection Short Circuit Protection (max.) Over Temperature Protection BR360-3.3S 198W 48V (36~75V) 7.5A BR360-12S 360W BR360-48S 153.6W 11A 5.5A (Vin = 0 - 75 V; Iout = 60 A) (Vin= 36 V; Iout = 30 A) (Vin= 36 V; Iout = 3.2 A) 4W 3.3V 60A 0.2% 0.3% 4.3W 12V 30A 0.3% 0.5% 1.2W 48V 3.2A 1% 1% 150 mV 300 mV 300 mV 92% 94.8% 93% 93% 95.6% 92.5% 90% 92.9% 89.5% Hiccup mode Hiccup mode 3.8~5V 14~16.5V 53~59V Hiccup mode Hiccup mode Hiccup mode Hiccup mode Threshold:105~130°C / Hysteresis:5°C (min.) Self-recovery (The values are obtained by measuring the temperature of the PCB bottom near the thermal resistor.) Isolation Environment Voltage (V.DC.) Operating Temperature Storage Temperature Temperature Coefficient (max.) Humidity MTBF Safety Agency Approvals EMC EMI (Conducted & Radiated Emission) Physical Other Dimension (L x W x H) Weight Remote On/Off Voltage On/Off Current http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 Low level (V.DC.) High level (V.DC.) Low level (mA) (max.) 1500 VDC (Basic Isolation and Functional Isolation) -40°C…+85°C -55°C…+125°C 0.02 % Vout / °C (TA = -40°C to +85°C (-40°F to +185°F )) 95% RH 1.5 Million Hours (Airflow = 1.5 m/s (300 LFM); TA = 40°C (104°F); 80% load; .Telcordia SR332 Method 1 case 3) CE, UL, TUV UL60950-1 and IEC/EN60950 Class B Requirements in FCC and EN55022 (After Connecting to an External Filtering Circuit) 2.4 x 2.28 x 0.5 Inches ( 61.0 x 57.9 x 13.0 mm ) Tolerance 0.5 mm 100 g 67.6 g 82 g -0.7~1.2V -2~0.8V -0.7~1.2V 3.5~12V 3.5~18V 3.5~12V 1mA -1- VER : A_1 update : 2015.03.16 DC-DC Brick BR360 SERIES 360 Watts NOTE 1. During the test of input reflected ripple current, the input terminal must be connected to a 12uH inductor and a 220uF electrolytic capacitor. 2. Point B, which is for testing the output voltage ripple, is 25 mm (0.98 in.) away from the Vout(+) pin. DERATING http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 -2- VER : A_1 update : 2015.03.16 DC-DC Brick BR360 SERIES 360 Watts MECHANICAL DIMENSION DIMENSIONS TOLERANCE 3.3S PIN# 48S 12S 1 +DC IN +DC IN 2 ON / OFF CTL ON / OFF CTL 3 NC CASE 4 -DC IN -DC IN 5 -DC OUT -DC OUT 6 -Sense -Sense 7 Trim Trim 8 +Sense +Sense 9 +DC OUT +DC OUT http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 .x 0.2 mm (0.007 in) .xx 0.13 mm (0.005 in) -3-