7/16 DIN Male Connector Crimp/Non-Solder Contact Attachment For PE-C600, LMR-600 TECHNICAL DATA SHEET PE44539 7/16 DIN Male Connector Crimp/Non-Solder Contact Attachment For PE-C600, LMR-600 Configuration Connector Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style 7/16 DIN Male PE-C600,LMR-600 Crimp/Non-Solder Contact Straight Electrical Specifications Impedance, Ohms 50 Mechanical Specifications Size Length, in [mm] Width/Dia., in [mm] 2.01 [51.05] 1.25 [31.75] Weight, lbs [g] 0.11 [49.9] Connector Type Contact Material and Plating Coupling Nut Material and Plating Hex Size, in. Torque, ft-lbs [Nm] Body Material and Plating Dielectric Type 7/16 DIN Male Beryllium Copper, Silver Brass, Tri-Metal 1 1/4 18.417 [24.97] Brass, Tri-Metal PTFE . Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant Yes Plotted and Other Data Notes: Values at 25 °C, sea level 7/16 DIN Male Connector Crimp/Non-Solder Contact Attachment For PE-C600, LMR-600 from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 7/16 DIN Male Connector Crimp/Non-Solder Contact Attachment For PE-C600, LMR-600 PE44539 URL: http://www.pasternack.com/7-16-male-standard-pe-c600-0.600-connector-pe44539-p.aspx PE44539 REV 01 1 © 2013 Pasternack Enterprises All Rights Reserved PE44539 REV 01 FERRULE: .610" HEX CRIMP TOOL 3. SLIDE FERRULE FORWARD AND BUTT AGAINST CONNECTOR SHOULDER, THEN CRIMP FERRULE. 2. SLIDE FERRULE OVER CABLE. INSTALL CABLE INTO BODY OF CONNECTOR, PUSH UNTIL IT SEATS IN PLACE. 1. STRIP CABLE AS SHOWN & CHAMFER CENTER CONDUCTOR. ASSEMBLY PROCEDURES REV. C CAD FILE 081811 SCALE N/A SIZE A 2231 NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. FSCM NO. 53919 PE44539 DWG TITLE 7/16 DIN Male Connector Crimp/Non-Solder Contact Attachment For PE-C600, LMR-600 PE44539 CAD Drawing 2