RP BNC Male Connector Crimp/Solder Attachment For RG174, RG316, RG188 TECHNICAL DATA SHEET PE4720 RP BNC Male Connector Crimp/Solder Attachment For RG174, RG316, RG188 Configuration Connector Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style BNC Male Reverse Polarity RG174,RG316,RG188 Crimp/Solder Straight Electrical Specifications Impedance, Ohms 50 Mechanical Specifications Size Length, in [mm] Width/Dia., in [mm] 1.185 [30.1] 0.57 [14.48] Weight, lbs [g] 0.02 [9.07] Connector Type Contact Material and Plating Contact Plating Specification Coupling Nut Material and Plating Coupling Nut Plating Specification Body Material and Plating Body Plating Specification Dielectric Type BNC Male Reverse Polarity Brass, Gold 3µ-5µ in. minimum Brass, Nickel 70µ in. minimum Brass, Nickel 70µ in. minimum Teflon . Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant Yes Plotted and Other Data Notes: Values at 25 °C, sea level RP BNC Male Connector Crimp/Solder Attachment For RG174, RG316, RG188 from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: RP BNC Male Connector Crimp/Solder Attachment For RG174, RG316, RG188 PE4720 URL: http://www.pasternack.com/bnc-male-reverse-polarity-rg174-rg316-rg188-connector-pe4720-p.aspx PE4720 REV 01 1 © 2013 Pasternack Enterprises All Rights Reserved THE CONTACT (4) SHOULD BUTT AGAINST THE DIELECTRIC & PTFE SPACER. CRIMP CONTACT TO CABLE CENTER CONDUCTOR. 3. 5. INSTALL CABLE ASSEMBLY INTO BODY SO THAT THE INNER FERRULE PORTION OF BODY SLIDES UNDER FORWARD UNTIL CONTACT SNAPS INTO PLACE. SLIDE FERRULE OVER BRAID AND UP AGAINST CONNECTOR BODY & CRIMP. FLARE END OF CABLE BRAID & SLIDE METAL SPACER (2) & PTFE (3) SPACER OVER CABLE DIELECTRIC. 2. 4. STRIP CABLE AS SHOWN & SLIDE FERRULE (1) ONTO CABLE. 1. ASSEMBLY PROCEDURES PE4720 REV 01 FSCM NO. 53919 PE4720 DWG TITLE CAD FILE 060402 SCALE N/A SIZE A XXXX NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. CONTACT: .068" HEX CRIMP TOOL FERRULE: .178" HEX CRIMP TOOL CRIMP SIZE REQUIRED RP BNC Male Connector Crimp/Solder Attachment For RG174, RG316, RG188 PE4720 CAD Drawing 2