SMA Male Connector Crimp/Solder (Captive Contact) Attachment For RG55, RG142, RG223, RG400 TECHNICAL DATA SHEET PE4576 SMA Male Connector Crimp/Solder (Captive Contact) Attachment For RG55, RG142, RG223, RG400 Configuration Connector Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style SMA Male RG55,RG142,RG223,RG400 Crimp/Solder (Captive Contact) Straight Electrical Specifications Impedance, Ohms 50 Mechanical Specifications Size Length, in [mm] Width/Dia., in [mm] 1.235 [31.37] 0.312 [7.92] Weight, lbs [g] 0.013 [5.9] Connector Type Contact Material and Plating Coupling Nut Material and Plating Hex Size, in. Torque, in-lbs [Nm] Body Material and Plating Dielectric Type SMA Male Gold Brass, Nickel 5/16 5 [0.57] Brass, Nickel PTFE . Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant Yes Plotted and Other Data Notes: Values at 25 °C, sea level SMA Male Connector Crimp/Solder (Captive Contact) Attachment For RG55, RG142, RG223, RG400 from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: SMA Male Connector Crimp/Solder (Captive Contact) Attachment For RG55, RG142, RG223, RG400 PE4576 URL: http://www.pasternack.com/sma-male-standard-rg55-rg142-rg223-rg400-connector-pe4576-p.aspx PE4576 REV 1 © 2013 Pasternack Enterprises All Rights Reserved PE4576 REV FERRULE: .213" HEX CRIMP TOOL CRIMP SIZE REQUIRED 3. SOLDER CONTACT TO CENTER CONDUCTOR. CLEAN, INSERT CABLE ASSEMBLY INTO BODY & TIGHTEN. 2. SLIDE FERRULE (1) OVER CABLE. FLAIR BRAID & SLIDE WEDGE ASSEMBLY (2) UNDER BRAID WITH CENTER CONDUCTOR PROTRUDING THROUGH HOLE IN INSULATOR. SLIDE FERRULE (1) OVER BRAID & AGAINST CLAMP NUT (2). CRIMP FERRULE. 1. STRIP CABLE AS SHOWN. DO NOT NICK CENTER CONDUCTOR. TIN CENTER CONDUCTOR. ASSEMBLY PROCEDURES FSCM NO. 53919 PE4576 DWG TITLE CAD FILE 111105 SCALE N/A SIZE A 127 NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. SMA Male Connector Crimp/Solder (Captive Contact) Attachment For RG55, RG142, RG223, RG400 PE4576 CAD Drawing 2