SMA Male Right Angle Connector Crimp/ Solder Attachment For RG180, RG195 TECHNICAL DATA SHEET PE4580 SMA Male Right Angle Connector Crimp/Solder Attachment For RG180, RG195 Configuration Connector Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style SMA Male RG180,RG195 Crimp/Solder Right Angle Electrical Specifications Impedance, Ohms 50 Mechanical Specifications Size Length, in [mm] Width/Dia., in [mm] Height, in [mm] 0.618 [15.7] 0.312 [8] 0.93 [23.62] Weight, lbs [g] 0.013 [5.9] Connector Type Contact Material and Plating Coupling Nut Material and Plating Hex Size, in. Torque, in-lbs [Nm] Body Material and Plating Dielectric Type SMA Male Gold Brass, Nickel 5/16 5 [0.57] Brass, Nickel PTFE . Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant Yes Plotted and Other Data Notes: Values at 25 °C, sea level SMA Male Right Angle Connector Crimp/Solder Attachment For RG180, RG195 from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: SMA Male Right Angle Connector Crimp/Solder Attachment For RG180, RG195 PE4580 URL: http://www.pasternack.com/sma-male-standard-rg180-rg195-connector-pe4580-p.aspx PE4580 REV 1 © 2013 Pasternack Enterprises All Rights Reserved PE4580 REV FERRULE: .178" HEX CRIMP TOOL CRIMP SIZE REQUIRED 3. CRIMP FERRULE & PRESS CAP DOWN. 2. INSTALL CABLE INTO BODY OF CONNECTOR AND SOFT SOLDER CENTER CONDUCTOR IN PLACE. 1. STRIP CABLE AS SHOWN & SLIDE FERRULE OVER CABLE. ASSEMBLY PROCEDURES REV. A FSCM NO. 53919 PE4580 DWG TITLE CAD FILE 021813-A SCALE N/A SIZE A 127 NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. SMA Male Right Angle Connector Crimp/Solder Attachment For RG180, RG195 PE4580 CAD Drawing 2