75 Ohm N Male Connector Crimp/Solder Attachment For RG179, RG187 TECHNICAL DATA SHEET PE4656 75 Ohm N Male Connector Crimp/Solder Attachment For RG179, RG187 Configuration Connector Connector Specification Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style N Male MIL-C-39012 RG179,RG187 Crimp/Solder Straight Electrical Specifications Impedance, Ohms 75 Mechanical Specifications Size Length, in [mm] Width/Dia., in [mm] 1.153 [29.29] 0.827 [21] Weight, lbs [g] 0.075 [34.02] Connector Type Contact Material and Plating Contact Plating Specification Body Material and Plating Body Plating Specification Dielectric Type N Male Brass, Gold 3µ in. minimum Brass, Nickel 70µ in. minimum Teflon . Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant Yes Plotted and Other Data Notes: Values at 25 °C, sea level 75 Ohm N Male Connector Crimp/Solder Attachment For RG179, RG187 from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 75 Ohm N Male Connector Crimp/Solder Attachment For RG179, RG187 PE4656 URL: http://www.pasternack.com/n-male-standard-rg179-rg187-connector-pe4656-p.aspx PE4656 REV 1 © 2013 Pasternack Enterprises All Rights Reserved PE4656 REV CONTACT: .068" HEX CRIMP TOOL FERRULE: .178" HEX CRIMP TOOL CRIMP SIZE REQUIRED 4. INSTALL CABLE ASSEMBLY INTO BODY SO THAT THE INNER FERRULE PORTION OF BODY SLIDES UNDER BRAID. PUSH CABLE ASSEMBLY INTO BODY. SLIDE FERRULE OVER BRAID & UP AGAINST BODY. CRIMP FERRULE. 3. THE CONTACT (4) SHOULD BUTT AGAINST THE DIELECTRIC & PTFE SPACER. CRIMP CONTACT TO CABLE CENTER CONDUCTOR. 2. FLARE END OF CABLE BRAID & SLIDE METAL SPACER (2) & PTFE (3) SPACER OVER CABLE DIELECTRIC. 1. STRIP CABLE AS SHOWN & SLIDE FERRULE (1) ONTO CABLE. ASSEMBLY PROCEDURES FSCM NO. 53919 PE4656 DWG TITLE CAD FILE 052902 SCALE N/A SIZE A 127 NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. 75 Ohm N Male Connector Crimp/Solder Attachment For RG179, RG187 PE4656 CAD Drawing 2