MPS45 4 5 W S i n g l e O u t put for Medical Type series Universal AC input Low leakage current ≤ 0.3mA Protections: Short circuit / Overload / Over voltage / Over temperature Fixed switching frequency at 45KHz Cooling by free air convection Model Number Output Volts Output Amps Ripple & Noise Line Reg Load Reg Tolerance Min Load Efficiency SINGLE OUTPUT MPS45-3.3 MPS45-5 MPS45-7.5 MPS45-12 MPS45-13.5 MPS45-15 MPS45-24 MPS45-27 MPS45-48 3.3 Volts(DC) 5 Volts(DC) 7.5 Volts(DC) 12 Volts(DC) 13.5 Volts(DC) 15 Volts(DC) 24 Volts(DC) 27 Volts(DC) 48 Volts(DC) WWW.ASTRODYNE.COM 8.0 Amps 8.0 Amps 5.4 Amps 3.7 Amps 3.3 Amps 3.0 Amps 1.9 Amps 1.7 Amps 1.0 Amps 80mV pk-pk 100mV pk-pk 100mV pk-pk 100mV pk-pk 100mV pk-pk 100mV pk-pk 100mV pk-pk 100mV pk-pk 100mV pk-pk ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±3.0% ±3.0% ±3.0% ±2.0% ±2.0% ±2.0% ±2.0% ±2.0% ±2.0% ±3.0% ±3.0% ±3.0% ±2.0% ±2.0% ±2.0% ±2.0% ±2.0% ±2.0% 0~10.7 Amps 0~10.5 Amps 0~7 Amps 0~4.4 Amps 0~3.9 Amps 0~3.5 Amps 0~2.2 Amps 0~1.95 Amps 0~1.1 Amps 65% 72% 75% 76% 76% 77% 78% 78% 78% ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 MPS45 4 5 W S i n g l e O u t put for Medical Type INPUT SPECIFICATIONS Input Voltage Range Frequency Range Inrush Current, typ: (cold start) Input Current Leakage current 90-264VAC / 127-370 Volts(DC) 47-440 Hz 15 Amps @ 115VAC Input 30 Amps @ 230VAC 1.2 Amps max @ 115VAC 0.7 Amps max @ 230VAC < 0.3mA / 230VAC series Efficiency See Selection Chart Isolation 4000VAC Input - Output 1500VAC Input - Ground 500VAC Output - Ground EMS Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, EN60601-1-2, medical level, criteria A OUTPUT SPECIFICATIONS ENVIRONMENTAL SPECIFICATIONS Voltage and Current Line Regulation Load Regulation Voltage Tolerance (Note 2) Ripple/Noise (Note 1) Hold Up Time @ FL Setup, Rise Time @ FL Over Temperature Protection Over Voltage Protection Over Current Protection DC Voltage Adjust PHYSICAL SPECIFICATIONS See Selection Chart See Selection Chart See Selection Chart See Selection Chart See Selection Chart 50mS @ 230VAC 16mS @ 115VAC 800mS, 30mS/230VAC 1200mS. 30mS/115VAC Tj 135°C typ. (U1) detect on main conrol IC, auto recover 115~135% Hiccup mode, auto recover 53~75W rated output power 36~55W (3.3Volts DC) Hiccup mode, auto recover ±10% GENERAL SPECIFICATIONS Safety Insulation Resistance EMI Harmonic Current UL2601-1 TUV EN60601-1 IEC60601-1 approved ≥ 100MΩ / 500 Volts(DC) Compliance to EN55011 (CISPR11) Class B Compliance to EN61000-3-2,-3 All specifications are typical at nominal input, full load, and 25°C unless otherwise noted WWW.ASTRODYNE.COM Oper. Temperature Storage Temperature Relative Humidity Temperature Coefficient MTBF Vibration -10°C to +60°C (See Derate Curve) -20°C to +85°C, 10~95% RH 20 to +90% RH non cond 0.04% / °C (0-50°C) 366.7KHrs min, MIL-HDBK-217F(25°C) 10~500Hz, 2G10min./1cycle, period for 60min. each along X, Y, Z axes Size Millimeters 127 x 76 x 28 Inches 5” x 2.99” x 1.10” Weight 6.35 oz (180g) Note 1. Ripple and Noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47 uf parallel capacitor. 2. Tolerance: includes set up tolerance, line regulation and load regulation. 3. Mounting holes M1 and M2 should be grounded for EMI purposes. Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications. ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 4 5 W S i n g l e O u t put for Medical Type WWW.ASTRODYNE.COM MPS45 series ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 4 5 W S i n g l e O u t put for Medical Type WWW.ASTRODYNE.COM MPS45 series ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458