LPS50 5 0 W S i n g l e O u t put Switching Power Supply series Universal AC input Protections:Short circuit/Over load/Over voltage Cooling by free air convection LED indicator for power on Small and compact size Built-in remote ON-OFF control Low profil: 23mm thickness Model Number Output Volts SINGLE OUTPUT LPS50-3.3 LPS50-5 LPS50-12 LPS50-15 LPS50-24 LPS50-48 3.3 Volts(DC) 5 Volts(DC) 12 Volts(DC) 15 Volts(DC) 24 Volts(DC) 48 Volts(DC) WWW.ASTRODYNE.COM Output Amps 10 Amps 10 Amps 4.2 Amps 3.4 Amps 2.1 Amps 1.1 Amps Ripple & Noise Min Load 50mV pk-pk 50mV pk-pk 80mV pk-pk 80mV pk-pk 80mV pk-pk 100mV pk-pk 0~12Amps 0~12Amps 0~5.0Amps 0~4.1Amps 0~2.5Amps 0~1.3Amps DC Volt Adjust Peak Load Volt Tolerance 3~3.6Volt(DC) 4.5~5.5Volt(DC) 10.8~13.2Volt(DC) 13.5~16.5Volt(DC) 21.6~27.2Volt(DC) 43.2~52.8Volt(DC) 39.6W 60W 60W 61.5W 60W 62.4W ±3.0% ±3.0% ±2.0% ±2.0% ±1.0% ±1.0% ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 LPS50 5 0 W S i n g l e O u t put Switching Power Supply INPUT SPECIFICATIONS Input Voltage Range 90 ~ 264 VAC; 127~370 Volts(DC) Frequency Range 47-63 Hz Inrush Current, typ: (cold start)18Amps@115VAC / 35Amps@230VAC Input Current, typ. 3.3Volts(DC) 0.9Amps@115VAC / 0.6Amps@230VAC 5~48Volts(DC) 1.2Amps@115VAC/ / 0.8Amps@230VAC Leakage current < 1mAmps /240VAC Min Load See Selection Chart OUTPUT SPECIFICATIONS Voltage and Current Line Regulation Load Regulation Voltage Tolerance (Note2) Ripple/Noise (Note 1) Hold Up Time @ FL Setup, Rise Time @ FL Over Voltage Protection Over Current Protection DC Volt Adjust Peak Load, 10S(Note 3) See Selection Chart ±1.0% ±3.0%: 3.3~5Volts(DC) ±2.0%: 12~15Volts(DC) ±1.0%: 24~48Volts(DC) See Selection Chart See Selection Chart 70mS/230VAC 12mS/115VAC 100ms, 40m/230VAC 100mS, 40mS/115VAC 3.8 ~ 4.45Volt(DC): 3.3Volts(DC) 5.75 ~ 6.75Volt(DC): 5Volts(DC) 13.8 ~ 16.2Volt(DC): 12Volts(DC) 17.25 ~ 20.25Volt(DC): 15Volts(DC) 27.6~ 32.4Volt(DC): 24Volts(DC) 57.6~ 67.2Volt(DC): 48Volts(DC) Hiccup mode, auto recover 122 ~ 160% rated output power Hiccup mode, auto recover See Selection Chart See Selection Chart series Harmonic Current Compliance to EN61000-3-2,-3 Efficiency, typ. 75% (LPS-50-3.3) 81% (LPS-50-5) 82% (LPS-50-12) 84% (LPS-50-15) 85% (LPS-50-24) 86%(LPS-50-48) Isolation 3000VAC Input - Output 1500VAC Input - Ground 500VAC Output - Ground EMS Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11; ENV50204,EN61000-6-2(EN50082-2) heavy Industry Level, Criteria A Remote ON/OFF RC+/RC-: 0~0.8Volts(DC)= power On 4~10Volts(DC)= power Off ENVIRONMENTAL SPECIFICATIONS Oper. Temperature Storage Temperature Relative Humidity Temperature Coefficient MTBF Vibration -20°C to +70°C (See Derate Curve) -20°C to +85°C, 10~95% RH 20~90% RH non cond ±0.04% / °C (0-50°C) 341.7KHrs min,MIL-HDBK-217F(25°C) 10~500Hz, 2G10min./1cycle, period for 60min. each along X, Y, Z axes PHYSICAL SPECIFICATIONS Size Millimeters 195 x 55 x 23 Inches 7.68” x 2.17 ” x 0.91 ” Weight 8.47 oz (240g) Note GENERAL SPECIFICATIONS Safety Insulation Resistance EMI UL60950-1, TUV EN60950-1 Approved ≥ 100MΩ / 500Volts(DC) Compliance to EN55022B (CISPR22B) All specifications are typical at nominal input, full load, and 25°C unless otherwise noted WWW.ASTRODYNE.COM 1. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 2. Tolerance : includes set up tolerance, line regulation and load regulation. 3. 33.3% Duty cycle maximum within every 30 seconds. Average output power should not exceed the rated power. Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications. ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 5 0 W S i n g l e O u t put Switching Power Supply WWW.ASTRODYNE.COM LPS50 series ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 5 0 W S i n g l e O u t put Switching Power Supply WWW.ASTRODYNE.COM LPS50 series ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458