LevelOne User Manual POT-xxxx Series PoE Pepeater over 2-wire M/S 1. Introductions The POT system, one master & one slave units, provide a long-reach Ethernet extension with remote Power-over-Ethernet (PoE) capability over a 2-wire line. Connection with a Class 0 PD device, the distance of two-wire 24AWG cables can be up to 300 meters when using a 48Watt high power PoE Switch, FSW-0513/0543. Users may select a fixed data rate for different copper line ranging. The maximum data rate can be up to 60 Mbps full duplex for 2-wire line. The POT master unit is powered by the local PoE Ethernet network, and transmits both the data and power to the remote slave unit over 2-wire cable. The remote unit regenerates the power and provides the PoE capability to power up the remote PD device up to 15 watts when connecting to 48Watt High Power Switch, FSW-0513. The POT M/S supports the indoor & outdoor models with wall-mount feature. Equipped with dip switches, the 2-wire line speed can be configured to meet different line gauges and distances. A POT pair offers a cost effective solution for remote power applications such as LAN-to-LAN connectivity, Video Streaming, FTTB, and MDU/MTU over single twisted line. IP-66 POT-1110 is IP66 is IP66-compliant meaning it is weatherproof from snow, rain, typhoon, desert heat, etc. this PoE Repeater is up to the challenge for deployment in any harsh weather condition. 1 2. Application Notes 1) Ethernet & Power Extension over RJ-11 Cable PSE Power Up to 300m over RJ-11 POT-1110 RJ-45 POT-0100 RJ-45 Line Power FSW-0513 PSE Power 3. Features Two-wire cables are used to connect 100Mbps Fast Ethernet PoE devices Max. distance up to 300m for 24AWG cable Max. data rate up to 60 Mbps full duplex Remote PoE capability for PD devices of WiFi AP, IP camera, IP telephones Up to 15 watts for remote PoE, depending on PSE Power Easy installation by indoor & outdoor different models IEEE 802.3af PSE Compliant for Class 0-3 Dip Switches for RJ-11 rate settings Auto MDIX for 10/100 BaseT Ethernet LAN Ports Low-Latency for Video/Voice/Data applications 4. Packing Contents Inside the package you should find: (1) One POT-xxxx unit (Master or Slave) (2) One User Manual Please check if the packing is damaged or any component is missing. If so, please contact your distributor. 5. LED Indicators On the front panel of POT-xxxx, there are 4 LED indicators as the following POWER: “Green On” indicates power is on and normal. LAN: “Green On” indicates Ethernet LAN port is in connection. “Flashing” indicates Ethernet LAN data activities. 2 LINE: “Green On” indicates 2-wire line is in connection. “Flashing” indicates 2-wire line is in line handshaking. ACTIVE: “Green On” indicates as POT-0110 Slave unit. 6. Dip Switches Settings(default DIP setting All is OFF) Pin 1 Pin 2 Pin 3 Pin 4 Line Rate (Mbps) NA OFF OFF OFF 10/10 NA ON OFF OFF 20/20 NA OFF ON OFF 30/30 NA ON ON OFF 40/40 NA OFF OFF ON 50/50 NA ON OFF ON 60/60 NA OFF ON ON 60/60 NA ON ON ON 60/60 7. Data Rates & Distances PoE Switch POT-1110 RJ-45 POT-0100 RJ-45 RJ-11 PSE Power PSE Power PSE Power A B C Performance for AWG 24 Line with 15.4W PSE (Distance A=1m) Line Rate (Mbps) Max. PoE Output Power (Watts) Distance B (Meter) Distance C (Meter) 60/60 100 100 7 60/60 200 100 NA 3 PoE Output Power Performance for AWG 24 Line with 40W Power Injector (Distance A=1m) Line Rate (Mbps) Max. PoE Output Power (Watts) Distance B (Meter) Distance C (Meter) 60/60 100 100 20 60/60 200 100 13 50/50 300 100 7 40/40 400 100 NA 20/20 500 1 NA Quick Guide 1. Connect one of the Ethernet Switch port with PoE power supply to the LAN port of POT-0100 (Master) as the following connection. POT-0100 Master PoE Switch RJ-45 Cable 2. Connect the LINE port of POT-0100 (Master) to POT-1110 (Ourdoor Slave) LINE port (Use RJ45 Connect PIN4 & PIN5) as the following connection. POT-0100 Master POT-1110 Outdoor Slave RJ-11 Cable 3. Connect the LAN port of POT-1110 (Outdoor Slave) to power up the PD device as the following connection. POT-1110 Outdoor Slave PD Device RJ-45 Cable 4. Power on PSE Source. POT system will start handshaking .When LINE LED is always on, The POT system is connection ready. V1.0 4