PDF

PoE Repeater over
2-wire (Master)
POT-0100
H/W Version: 1
The POT system, one master & one slave units, provide
a long-reach Ethernet extension with remote Powerover-Ethernet (PoE) capability over a 2-wire line.
Connection with a Class 0 PD device, the distance
of two-wire 24AWG cables can be up to 400 meters
when using a 48Watt high power PoE Switch,
FSW-0513/0543. Users may select a fixed data rate for
different copper line ranging. The maximum data rate
can be up to 60 Mbps full duplex for 2-wire line.
The POT master unit is powered by the local PoE
Ethernet network, and transmits both the data and
power to the remote slave unit over 2-wire cable. The
1
remote unit regenerates the power and provides the
PoE capability to power up the remote PD device up
to 15 watts when connecting to 48Watt High Power
Switch, FSW-0513. The POT M/S supports the indoor &
outdoor models with wall-mount feature.
Equipped with dip switches, the 2-wire line speed
can be configured to meet different line gauges and
distances. A POT pair offers a cost effective solution
for remote power applications such as LAN-to-LAN
connectivity, Video Streaming, FTTB, and MDU/MTU
over single twisted line.
2
3
4
1. LED Indicator
2. Dip Switch
3. RJ-11 Out
4. RJ-45 In
Key Features
- Two-wire cables are used to connect 100Mbps Fast
Ethernet PoE devices
- Maximum distance up to 500 meters for 24 AWG
cable
- Maximum data rate up to 60Mbps full duplex
- Remote PoE capability for PD devices of WiFi AP, IP
camera, IP telephones
- Up to 15 Watts for remote PoE, Depending on PSE
power
- Easy installation by indoor & outdoor different
models
- Dip Switches for 2-wire line rate settings
- Auto MDIX for 10/100 Base-Tx Ethernet LAN Ports
- Low-Latency for Video/Voice/Data applications
Works Well With
POI-4000
High-power PoE Injector
FSW-0513
4-Port High Power PoE Switch
www.level1.com I one world_one brand_one level_
Ethernet Switches
Technical Specifications
Line Interface
LED Indicator:
Data Rate: 60/60 Mbps
Power: Green On- indicates power is on and normal
Power: 48V
LAN: Green On- indicates Ethernet LAN port is in connection
RJ-11 Connector x 1
LAN Interface
Line: Green On- indicates 2-wire line is in connection
Auto-Detection for 10/100 Base-Tx and Half / Full duplex
Full compatible with IEEE 802.3 / IEEE802.3u
M/S: Green On-indicates as 2-wire Slave unit
Automatic MDIX Function
RJ-45 Connector x 1
Physical Dimension ( L x W x H ):
PSE
120mm x 90mm x 28mm
Output Voltage within 44~57V
Operating Environment:
Safety-Extra-Low-Voltage (SELV) Compliant
Humidity: 5% ~95% non-condensing
Maximum output power 15 Watts
Temperature: 0~50°C
Flashing- indicates Ethernet LAN data activates
Flashing- indicates 2-wire line is in line handshaking
Green Off- indicates as 2-wire Master unit
Regulatory Compliance:
FCC Rules Part 15
CE
Product Diagram
Ethernet Cable (RJ-45)
PoE (Power + Data)
RJ-11 Phone Line (Power + Data)
Indoor to Indoor Solution
POT-0110
1m
Non-PoE Switch
FSW-0513
up to 400m
for 2 wire
POT-0100
PoE PD devices
48W
100m
Indoor to Indoor Solution
POT-0110
1m
Non-PoE Switch
POI-4000
POT-0100
up to 300m
for 2 wire
40W
PoE PD devices
100m
Note: These distances are typical results when used with 24AWG RJ-11 Cable
Order Information
POT-0100: PoE Repeater over 2-wire (Master)
Package Contents
POT-0100 x 1, User Manual x 1
All mentioned brand names are registered trademarks and property of their owners. Technical specifications are subject to change without notice.
© Copyright Digital Data Communications GmbH. All Rights Reserved.
V1.0