Series AM1/4S-Z 0.25 Watt | DC-DC Converter FEATURES: RoHS compliant 4 Pin SIP Package Low ripple and noise High efficiency up to 72% Operating temperature -40oC to + 85oC Input / Output isolation 1000 and 3000VDC Pin compatible with multiple manufacturers Models Single output Model AM1/4S-0503SZ AM1/4S-0505SZ AM1/4S-0507SZ AM1/4S-0509SZ AM1/4S-0512SZ AM1/4S-0515SZ AM1/4S-0518SZ AM1/4S-0524SZ AM1/4S-1203SZ AM1/4S-1205SZ AM1/4S-1207SZ AM1/4S-1209SZ AM1/4S-1212SZ AM1/4S-1215SZ AM1/4S-1218SZ AM1/4S-1224SZ AM1/4S-1505SZ AM1/4S-2403SZ AM1/4S-2405SZ AM1/4S-2407SZ AM1/4S-2409SZ AM1/4S-2412SZ AM1/4S-2415SZ AM1/4S-2418SZ AM1/4S-2424SZ AM1/4S-0503SH30Z AM1/4S-0505SH30Z AM1/4S-0507SH30Z AM1/4S-0509SH30Z AM1/4S-0512SH30Z AM1/4S-0515SH30Z AM1/4S-0518SH30Z AM1/4S-0524SH30Z AM1/4S-1203SH30Z AM1/4S-1205SH30Z AM1/4S-1207SH30Z AM1/4S-1209SH30Z AM1/4S-1212SH30Z AM1/4S-1215SH30Z AM1/4S-1218SH30Z AM1/4S-1224SH30Z AM1/4S-2403SH30Z AM1/4S-2405SH30Z AM1/4S-2407SH30Z AM1/4S-2409SH30Z AM1/4S-2412SH30Z AM1/4S-2415SH30Z AM1/4S-2418SH30Z AM1/4S-2424SH30Z www.aimtec.com F 051e R11.G Input Voltage (V) Output Voltage (V) Output Current max (mA) Isolation (VDC) Max Capacitive Load (uF) Efficiency (%) 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 13.5 – 16.5 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 3.3 5 7.2 9 12 15 18 24 3.3 5 7.2 9 12 15 18 24 5 3.3 5 7.2 9 12 15 18 24 75.7 50 34.72 27.77 20.83 16.67 13.88 10.41 75.7 50 34.72 27.77 20.83 16.67 13.88 10.41 50 75.7 50 34.72 27.77 20.83 16.67 13.88 10.41 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 66 66 66 68 68 68 68 70 66 67 68 68 68 69 70 72 70 67 67 67 69 69 69 69 69 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 3.3 5 7.2 9 12 15 18 24 3.3 5 7.2 9 12 15 18 24 3.3 5 7.2 9 12 15 18 24 75.7 50 34.72 27.77 20.83 16.67 13.88 10.41 75.7 50 34.72 27.77 20.83 16.67 13.88 10.41 75.7 50 34.72 27.77 20.83 16.67 13.88 10.41 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 66 66 66 68 68 68 68 70 66 67 68 68 68 69 70 72 67 67 67 69 69 69 69 69 Tel: +1 514 620 2722 1 of 3 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1/4S-Z 0.25 Watt | DC-DC Converter Input Specifications Parameters Nominal Typical 5 12 15 24 Voltage range Filter Turn on transient process time Start up time Absolute maximum rating Maximum Units 4.5-5.5 10.8-13.2 13.5 – 16.5 21.6-26.4 Capacitor VDC 25 ms ms 200 7 15 17 28 100 5 Vin 12 Vin 15 Vin 24 Vin Peak input voltage time VDC ms Isolation Specifications Parameters Tested I/O voltage Resistance Capacitance Conditions Typical 3 sec Rated Units 1000 and 3000 VDC MOhm pF Maximum Units > 1000 60 Output Specifications Parameters Voltage accuracy Short circuit protection Line voltage regulation Load voltage regulation Load voltage regulation 3.3V output model Temperature coefficient Ripple & noise Capacitive load Rising time Conditions Typical For 1% change of Vin Load 20 – 100% Load 20 – 100% At 20MHz Bandwidth ±3 Momentary (1sec) ±1.2 ±10 ±20 ±0.02 100 % % of Vin % % %/oC mV p-p μF ms 100 50 General Specifications Parameters Switching frequency Operating temperature Storage temperature Maximum case temperature Cooling Humidity Case material Weight Dimensions (Lx W x H) MTBF Conditions Typical 100% load Without derating 80 Maximum Units 100 KHz o C o C o C -40 to +85 -40 to +125 Free air convection 95 Non-conductive black plastic 1.5 0.46 x 0.24 x 0.38 inches 11.68 x 6.00 x 9.65 mm >2 010 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25oC) % g NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified Pin Out Specifications Pin 1 2 3 4 Single - V Input +V Input - V Output +V Output www.aimtec.com F 051e R11.G Tel: +1 514 620 2722 2 of 3 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1/4S-Z 0.25 Watt | DC-DC Converter Dimensions 6.00 (0.24) (0.46) 10.15 (0.40) 9.65 (0.38) 0.50 (0.02) 0.50 (0.02) 1.25 (0.05) PRINTED FACE 0.30 (0.01) 6.00 (0.24) 0.50 (0.02) 3.05 (0.12) 2.54 (0.10) NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R11.G Tel: +1 514 620 2722 3 of 3 Toll free: + 1 888 9 AIMTEC (924 6832) North America only