ERmet ZDHD www.erni.com Catalog Katalog D E XXXXXX 074518 Ausgabe 3, 03/05 01/14 www.erni.com Edition 3 1 www.erni.com Catalog E XXXXXX 01/142 Edition 3 ERmet ZDHD High-Speed Connector Sytem for Datarate up to 25 Gbit/s ERNI’s new ZDHD connector is a high speed, differential board to backplane connector. It is a higher density extension of our standard ERmet ZD product line. The ZDHD has an optimized footprint for improved electrical performance and is designed for data rates up to 25 Gbits/s. ERNI’s ZD HD will be available in a 6-pair version. Future additions to the product line will include a 2- and 4-pair version. Features • • • • • • • • • • • 14 rows per inch by 6 differential pairs per row 84 differential pairs per inch L-shield for each differential pair Impedance 100 Ohm, 85 Ohm on request Datarate up to 25 Gbit/s Superior crosstalk behavior Pitch 1,8 mm between rows Pitch 3,6 mm between diff. pair within a row Downsized pressfit technology 0.46 mm dia. hole Robust alignment guides on male side walls Dual beam female contact design Catalog E XXXXXX 01/14 Edition 3 Technical Features • Operating temperature: -55/125 °C • Mechanical operation: >250 mating cycles • Insertion and withdrawal force: 0,7 N/pin (Signal) Material • • Housing materaial: LCP Contact material: Base material: Cu alloy Mating area: PdNi + Au Termination area: Sn www.erni.com 3 ERmet ZDHD Vertical Male Connectors 6 Pair Dimensional Drawings 3 6,35 12 27,2 25,7 X 1,8 23,4 Leiterplattenoberfläche Tochterkarte Top surface of daughter card 9 8 7 6 5 4 3 2 1 4,35 1,95 14 13 12 11 10 1,8 1,3 3,6 a b GND a/b c d GND c/d e f GND e/f g h GND g/h i j GND i/j k l GND k/l a b GND a/b c d GND c/d e f GND e/f g h GND g/h i j GND i/j k l GND k/l 1,8 0,55 23,4 25,3 Leiterplattenoberfläche Tochterkarte Top surface of daughter card Lochbild für Leiterplatte (Bestückungsplan) Board hole pattern (Component mounting side) 13 x 1,8 = (23,4) 1,8 1,8 1) GND d/e GND f/g GND h/i GND j/k GND l ±0.05 Durchmesser des metallisierten Loches Ø 0.46 ±0.05 Diameter of finished plated- through hole 1,9 GND a a b GND b/c c d GND d/e e f GND f/g g h GND h/i i j GND j/k k l GND l a b c d e f g h i j k l 14 13 12 11 10 9 8 7 6 5 4 3 2 1 Ø 0.55 ±0.02 Bohrungsdurchmesser des Loches Ø 0.55 ±0.02 Diameter of drilled hole Schichtaufbau im metallisierten Loch siehe Zeichnung 384191 Metal plating of plated-through hole see drawing 384191 18 x 1,2 = (21,6) GND b/c 1) Ø 0.46 1,2 GND a Ø 0,05 alle Löcher all holes ground 4Catalog E XXXXXX 01/14 Edition 3 www.erni.com ERmet ZDHD Right Angle Female Connectors 6 Pair Dimensional Drawings 23,4 1,8 l k GND k/l l k GND i/j j i GND g/h h g GND e/f f e GND c/d d c GND a/b b a j i GND g/h GND e/f GND c/d f e d c b a 1,8 4,15 1,3 GND a/b h g 25,5 GND i/j 3,6 GND k/l 0,65 14 13 12 11 10 9 8 7 6 5 4 3 2 1 Leiterplattenoberfläche Top surface of daughter card 1,6 10,8 34,75 25,18 21,35 25,5 Lochbild für Leiterplatte (Bestückungsseite) Board hole pattern (Component mounting side) 13 x 1,8 = (23.4) Ø 0,05 alle Löcher all holes 1) GND l l k GND j/k j i GND h/i h g GND f/g f e GND d/e d c GND b/c b a GND a 9 8 7 6 5 4 3 2 1 Schichtaufbau im metallisierten Loch siehe Zeichnung 384191 1,5 3,6 18 x 1,2 = (21,6) Metal plating of plated-through hole see drawing 384191 1,8 14 13 12 11 10 1) Ø 0.46 ± 0.05 Durchmesser des metallisierten Loches Ø 0.46 ± 0.05 Diameter of finished plated-through hole Ø 0.55 ± 0.02 Bohrdurchmesser des Loches Ø 0.55 ± 0.02 Diameter of drilled hole GND l l k GND j/k j i GND h/i h g GND f/g f e GND d/e d c GND b/c b a GND a 4,5 1,2 3,6 19,2 1,8 ground Catalog E XXXXXX 01/14 Edition 3 www.erni.com 5 ERmet ZDHD Vertical Male Connectors 4 Pair Dimensional Drawings 3 6,35 12 20 18,5 X 1,8 23,4 Leiterplattenoberfläche Tochterkarte Top surface of daughter card 9 8 7 6 5 4 3 2 1 1,8 4,35 1,95 14 13 12 11 10 1,3 3,6 a b GND a/b c d GND c/d e f GND e/f g h GND g/h a b GND a/b c d GND c/d e f GND e/f g h GND g/h 1,8 23,4 25,3 0,55 Leiterplattenoberfläche Tochterkarte Top surface of daughter card Lochbild für Leiterplatte (Bestückungsplan) Board hole pattern (Component mounting side) 13 x 1,8 = (23,4) Ø 0,05 1,8 1,8 GND d/e GND f/g GND h 1,9 a b c d e f g h 14 13 12 11 10 9 8 7 6 5 4 3 2 1 ±0.05 Durchmesser des matallisierten Loches Ø 0.46 ±0.05 Diameter of finished plated-through hole Ø 0.55 ±0.02 Bohrungsdurchmesser des Loches Ø 0.55 ±0.02 Diameter of drilled hole Schichtaufbau im metallisierten Loch siehe Zeichnung 384191 12 x 1,2 = (21,6) GND b/c GND a a b GND b/c c d GND d/e e f GND f/g g h GND h 1) Ø 0.46 Metal plating of plated-through hole see drawing 384191 1,2 GND a alle Löcher all holes 1) ground 6Catalog E XXXXXX 01/14 Edition 3 www.erni.com ERmet ZDHD Right Angle Female Connectors 4 Pair Dimensional Drawings 23,4 GND e/f GND c/d GND g/h h g GND e/f f e GND c/d d c GND a/b b a f e d c b a 1,8 4,15 1,3 GND a/b h g 18,3 GND g/h 0,65 3,6 1,8 14 13 12 11 10 9 8 7 6 5 4 3 2 1 Leiterplattenoberfläche Top surface of daughter card 1,6 10,8 27,55 25,18 14,15 18,3 Lochbild für Leiterplatte (Bestückungsseite) Board hole pattern (Component mounting side) 13 x 1,8 = (23,4) Ø 0,05 alle Löcher all holes 1) GND h h g GND f/g f e GND d/e d c GND b/c b a GND a 9 8 7 6 5 4 3 2 1 Ø 0.55 ± 0.02 Bohrdurchmesser des Loches Ø 0.55 ± 0.02 Diameter of drilled hole 1,5 3,6 12 x 1,2 = (14,4) Metal plating of plated-through hole see drawing 384191 1,8 14 13 12 11 10 1) Ø 0.46 ± 0.05 Durchmesser des metallisierten Loches Ø 0.46 ± 0.05 Diameter of finished plated-through hole Schichtaufbau im metallisierten Loch siehe Zeichnung 384191 GND h h g GND f/g f e GND d/e d c GND b/c b a GND a 4,5 1,2 3,6 13,2 1,8 ground Catalog E XXXXXX 01/14 Edition 3 www.erni.com 7 ERmet ZDHD Vertical Male Connectors 2 Pair Dimensional Drawings 3 6,35 12 14,4 12,9 X 1,8 23,4 Leiterplattenoberfläche Tochterkarte Top surface of daughter card 8 7 6 5 4 3 2 1 3,6 a b GND a/b c d GND c/d a b GND a/b c d GND c/d 1,3 1,8 1,95 9 4,35 14 13 12 11 10 1,8 23,4 25,3 0,55 Leiterplattenoberfläche Tochterkarte Top surface of daughter card Lochbild für Leiterplatte (Bestückungsplan) Board hole pattern (Component mounting side) 13 x 1,8 = (23,4) Ø 0,05 1,8 1,9 GND a a b GND b/c c d GND d a b c d Schichtaufbau im metallisierten Loch siehe Zeichnung 384191 Metal plating of plated-through hole see drawing 384191 1,2 GND d ±0.05 Durchmesser des metallisierten Loches ±0.05 Diameter of finished plated- through hole Ø 0.55 ±0.02 Bohrungsdurchmesser des Loches Ø 0.55 ±0.02 Diameter of drilled hole Ø 0.46 6 x 1,2 = (7,2) GND b/c 1) Ø 0.46 1) 1,8 GND a alle Löcher all holes 14 13 12 11 10 9 8 7 6 5 4 3 2 1 ground 8Catalog E XXXXXX 01/14 Edition 3 www.erni.com ERmet ZDHD Right Angle Female Connectors 2 Pair Dimensional Drawings 23,4 3,6 b a 12,7 GND c/d d c GND a/b b a 1,8 GND a/b d c 1,3 GND c/d 0,65 4,15 1,8 14 13 12 11 10 9 8 7 6 5 4 3 2 1 Leiterplattenoberfläche Top surface of daughter card 25,18 10,8 20,35 1,6 8,55 12,7 Lochbild für Leiterplatte (Bestückungsseite) Board hole pattern (Component mounting side) 13 x 1,8 = (23,4) Ø 0,05 alle Löcher all holes Ø 1) 1) Ø 0.46 ± 0.05 Durchmesser des metallisierten Loches Ø 0.46 ± 0.05 Diameter of finished plated-through hole 9 8 7 6 5 4 3 2 1 Schichtaufbau im metallisierten Loch siehe Zeichnung 384191 1,5 Metal plating of plated-through hole see drawing 384191 1,8 14 13 12 11 10 3,6 GND d d c GND b/c b a GND a 6 x 1,2 = (7,2) Ø 0.55 ± 0.02 Bohrdurchmesser des Loches Ø 0.55 ± 0.02 Diameter of drilled hole GND d d c GND b/c b a GND a 4,5 3,6 6 1,2 1,8 ground Catalog E XXXXXX 01/14 Edition 3 www.erni.com 9 ERmet ZDHD Mating Conditions 1 1 Allowed misalignment tolerances longitudinal and transverse axes ±1 mm 2° 2° Allowed angular inclination tolerances, longitudinal ±2°, transverse ±2° Wipe length max. 1.5 mm 14 12.5 10Catalog E XXXXXX 01/14 Edition 3 www.erni.com ERmet ZDHD Mating Conditions ERmet ZDHD 6-14, mated 27,2 21,35 22,2 37,75 5 Daughtercard Backplane 13,8 ERmet ZDHD 4-14, mated 30,55 5 20 14,15 15 Backplane Daughtercard 13,8 ERmet ZDHD 2-14, mated Backplane 5 14,4 8,55 9,4 23,35 Daughtercard 13,8 Catalog E XXXXXX 01/14 Edition 3 www.erni.com 11 ERmet ZDHD High-Speed Connector Sytem for Datarate up to 25 Gbit/s Ordering Information Configuration Part Number Vertical Male Connector 6 Pair 384787* Right Angle Female Connector 6 Pair 384786* Vertical Male Connector 4 Pair 444798* Right Angle Female Connector 4 Pair 444797* Vertical Male Connector 2 Pair on request Right Angle Female Connector 2 Pair on request * Only for sample ordering. Simulations 25 Gbit/s transmission behavior of a backplane system, with a dauhtercard trace length of 25 mm and a backplane trace length of 200 mm. Boardmaterial: Dielectric loss = 0,009 without Equalizing 12Catalog E XXXXXX with 6-Tab FFE Equalizing 01/14 Edition 3 www.erni.com ERmet ZDHD Notes Catalog E XXXXXX 01/14 Edition 3 www.erni.com 13 ERmet ZDHD Notes 14Catalog E XXXXXX 01/14 Edition 3 www.erni.com Member www.erni.com Catalog Katalog D E XXXXXX 074518 Ausgabe 01/14 3, 03/05 www.erni.com Edition 3 15 ERNI Electronics GmbH & Co. KG Seestrasse 9 73099 Adelberg, Germany Tel +49 7166 50-0 Fax +49 7166 50-282 [email protected] Europe ERNI Electronics, Inc. 2201 Westwood Ave Richmond, VA 23230 Tel +1 804 228-4100 Fax +1 804 228-4099 [email protected] North America Canada ERNI Asia Holding Pte Ltd. Blk 4008 Ang Mo Kio Avenue 10 #04-01/02 Techplace I Singapore 569625 Tel +65 6 555 5885 Fax +65 6 555 5995 [email protected] Asia New Zealand South America Australia Africa Japan Mexico www.erni.com © ERNI Electronics GmbH & Co. KG 2014 • Printed in Germany. A policy of continuous improvement is followed and the right to alter any published data without notice is reserved. ERNI®, MicroStac®, MicroSpeed®, MiniBridge®, MaxiBridge®, ERmet®, ERmet ZD®, ERbic® and ERNIPRESS® are trademarks (registered or applied for in various countries) of ERNI Electronics GmbH & Co. KG. 16 Katalog D Catalog E XXXXXX 074518 Ausgabe 01/14 3, 03/05 www.erni.com Edition 3