ERNI ATCA Zone 1 Power Connector acc. to PICMG 3.0 ERNI is anxious to support customers extensively and is gradually completing the product range for interconnect platforms. This also includes the ATCA ( Advanced Telecom Computing Architecture) standard. This standard (also known as PICMG 3.0) is one of the latest standards addressing future telecommunication needs. ERNI can supply both power and signal connectors. According to PICMG 3.0 the AdvancedTCA Power Connector is qualified for use in Zone 1. The connector consists of 8 size 16 contacts along with 22 size 22 contacts. The insulation body has an integrated guiding feature. The contact terminals provide compliant pressfit zones for easy assembly to the PCB. The reliability of the pressfit technology has been proven many times in long term field experiences. The pressfit zones are flat-rock compatible, there is no need for special press-in tools. The excellent design fully avoids any risk of damaging the connector during the press-in process. The use of high conductivity copper alloy allows high current carrying capability. The power contacts are capable of carrying 16A and each signal contact is capable of carrying 2A. The female contacts’ „lead in“ design combined with cavity protection prevent the contacts from being damaged. Contacts which were plated subsequently do not have any bare ends and therefore are suitable for long term usage in critical environments. A mounting screw (customer supplied) may be used, but is not necessarily required. The connector meets all PICMG 3.0 performance requirements and is fully intermateable with alternative connectors which were designed according to the same standard. Features • In accordance with the PICMG 3.0 standard • Gold over nickel plating in contact area, tin plating on pcb terminals. • Controlled plating thickness at female mating point • RoHS compliant • Stamped female contacts with high conductive material for highest current carrying capacity • Improved normal contact force and relaxation compared to machined contacts • Reliable and proven pressfit zone • Standard flat rock press-in tools • No additional pcb retention hardware required • Female contacts fully protected through proven lead-in design • Positions 1, 2, 3 and 4 are not loaded • For specific applications partial contact loading is possible PICMG 3.0 Partnumber: ERNI Partnumber: ZP-A-030F-P1-2B 214077 1 www.erni.com Catalog E XXXXXX 11/06 Edition 1 Electrical And Mechanical Characteristics Technical data Temperature range -55/125°C Current rating Pos. 5-24, 27, 32 Pos. 25, 26, 28-31, 33, 34 Clearance and creepage distance Pos. Pos. Pos. Pos. Pos. Pos. Pos. Voltage rating Has to be determined according to client-specific using case (degree of environmental pollution) according to IEC 60664. Dielectric strength Pos. 1-16 Pos. 17-24 Pos. 25-34 Contact resistance < 20 mΩ Insulation resistance > 104 MΩ 5-16 17-24 25-26 27-34 13-16 to 17-20 21-24 to 25, 26 25, 26 to 27-29 2A 16 A min. min. min. min. min. min. min. 0.7 2.5 5.5 1.4 3.0 4.0 2.0 mm mm mm mm mm mm mm 1000 Vrms 2000 Vrms 2000 Vrms Materials Housing: Plastic material (symbol) PA 46 GF 30 CTI value CTI 225 UL flame rating UL 94 V-0 UL file (plastic material) E47960 Contact and mating area Base Material Cu alloy Plating 0.8 µm Au over 2-3 µm Ni Termination area Base Material Cu alloy Plating 0.5-2 µm Sn matt over 2-3 µm Ni Environment compatibility Recycling no flame-retardent additives, no toxic additives allow easy recycling 2 www.erni.com Catalog E XXXXXX 11/06 Edition 1 Dimensional Drawing 28,6 max. 17,5 max. 10,45 max. Bestückungsplan / contact assembly Datum +0,1 XXXXXX ERNI 214077 Verpackt in Tray Verpackungseinheit: 32 St. 16,1 ZP - A - 030F - P1 - 2B tray packaging packaging unit 32 pcs +0,2 -0,1 342,5 ( 5,5 ) 6 269,5 66,5 264,5 183,5 38,5 PCB Layout +0,09 1 -0,06 Schichtaufbau im metallisierten Loch ø 1 siehe Zeichnung 164062 Nr. 6 oder 114124 alle Löcher 0.05 diameter of drilled hole ø 1 see drawing 164062 no. 6 or 114124 0.05 2,5 0,05 22,55 6 (8x) Schichtaufbau im metallisierten Loch ø 1,6 siehe Zeichnung 164062 Nr. 10 oder 114407 diameter of drilled hole ø 1,6 see drawing 164062 no. 10 or 114407 +0,09 2) 1,6 -0,06 0.05 alle Löcher 2x 1) 17 21 3,9 30 2) 29 31 B 34 ø 1,6 ø 1,6 4,5 9,6 26 16 +0.09 -0,06 Durchmesser des metallisierten Loches +0.09 -0,06 diameter of finished plated-through hole 33 32 8 ø 1,0 ø 1,0 28 4,5 13 25 2,2 6,6 5 Printed in Germany · Subject to modification without prior notice. 1) (22x) 2x +0.09 -0.06 +0.09 -0.06 Durchmesser des metallisierten Loches diameter of finished plated-through hole Fehlende Angaben siehe PICMG 3.0 / missing information see PICMG 3.0 24 20 3 2 9,4 0.05 1,75 13,7 0,05 18,5 10 12 14,5 21,2 23,9 26,6 A 3 www.erni.com Catalog E XXXXXX 11/06 Edition 1