6 U CompactPCI Backplane with 8 Slots State of the art design for a wide range of applications General Description This standard backplane is member of the ERNI backplane familiy for use in Compact PCI computer systems. Its highperformance features make it ideally suited for telecom, datacom, and industrial applications like CNCs, robotic controls, and video image processing. ERNI develops and manufactures backplanes according to ISO 9001 at three productions sites around the world. Custom and semi-custom designs based on our standard backplanes are possible in various configurations. Part No: 163051 (with upper P47-connector only) Part No: 163070 (with upper and lower P47-connectors) Features • Form factor 6 U Dimension (WxH): 202.2 mm x 262.05 mm • 8 slots, 7 peripheral slots; system slot on left hand side Operates at 33 MHz clock frequency www.ERNI.com/contact/ Catalog E 074524 06/02 Edition 1 • Full 64-bit implementation • Rear Panel I/O on P3, P4, P5 at all Slots • A and AB-shrouds with guides for safe mating of rear I/O transition modules • Controlled impedance of 65 Ohm realized by stripline-technology • Hot-swap features according to PICMG 2.1 R2.0 • Best decoupling of supply voltages • High-quality design with best EMC-characteristics by fully shielded 10-layer PCB • Flexible grounding to chassis by fixing screws • Connectors according to IEC 61076-4-101 and PICMG 2.0 R3.0 • V(I/O) selectable by jumper element: 3.3 V or 5 V • 2 connectors for fans with 12V power supply, additional 2 connectors for fan temperature control by NTC 2 connectors for drives with 5V/12V supply • For use with modular power supply according to PICMG 2.11 R1.0 • Mounting holes for stiffening bar to prevent deflection during insertion and extraction of boards • Extension/cascading feature with system slot right backplane and power backplane • Accessories available: power backplane, power bridge V(I/O)-selection +5V VIO +3,3V LP-Nr 163052 Made in Germany cPCI 6U 8Slot SLP 2.0R3.0 Rear view +5V GND +12V power supply connector for drive (hard disk/ floppy/CD-Rom) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 +5V FAN2 GND 1 GND +12V -12V +3V3 NTC2 connectors for fan and temp. control by NTC Mounting holes for stiffening bar INH PRST auxiliary signals 1 FAN1 +5V GND +12V power supply connector for drive (hard disk/ floppy/CD-Rom) GND GND NTC1 connectors for fan and temp. control by NTC +3V3 +3V3 -12V -12V +12V +12V IPMB0 System Management Bus according to PICMG 2.9 IPMB1 +5V +5V connections for extension to other modular backplanes 202.2 +3,3V Front view VIO +5V z a b c d e f 45 46 47 JP5 21 23 42 44 Rear Panel I/O 20 19 1 1 P2 262.05 Rear Panel I/O 21 23 44 CompactPCI 64-Bit Bus 42 45 46 47 1 20 19 1 GND +5V CompactPCI 32-Bit Bus Positronic 47-pin connector for power supplies according to PICMG 2.11 Rev. 1.0 +3V3 1 2 -12V +12V 1 P1 1 2 3 4 5 6 7 8 System Slot www.ERNI.com/contact/ Catalog E 074524 06/02 Edition 1 Printed in Germany · Subject to modification without prior notice. 1 2 Rear Panel I/O 6 U Compact PCI Backplane with 8 Slots State of the art design for a wide range of applications General Description This standard backplane is member of the ERNI backplane familiy for use in Compact PCI computer systems. Its highperformance features make it ideally suited for telecom, datacom, and industrial applications like CNCs, robotic controls, and video image processing. • • • • • • • ERNI develops and manufactures backplanes according to ISO 9001 at three productions sites around the world. Custom and semi-custom designs based on our standard backplanes are possible in various configurations. Part No: 173363 Part No: 173833 for use with redundant power supplies • • • • • • • • Features • • Form factor 6 U Dimension (WxH): 262.05 mm x 222.5 mm www.ERNI.com/contact/ Catalog E 074500 10/03 Edition 3 8 slots, 7 peripheral slots, system slot on the right side PCI signal termination according to PICMG 2.0 Operates at 33 MHz clock frequency Full 64-bit implementation Rear I/O via P3, P4, and P5 possible at each slot A and AB-shrouds with guides for safe mating of rear I/O transition modules Controlled impedance of 65 Ohm realized by striplinetechnology Best decoupling of supply voltages High-quality design with best EMC-characteristics by fully shielded 10-layer PCB Flexible grounding to chassis by fixing screws Connectors according to IEC 61076-4-101 and PICMG 2.0 V(I/O) selectable by jumper element: 3.3 V or 5 V 2 connectors for fans with 12 V supply 2 connectors for drives with 5 V/12 V supply Various power supply options: 20 pin ATX connector Connection via Faston or M4-screw DIN style M connector according to PICMG 2.11 R1.0 Secure separation between hazardous voltages in mains supply and SELV circuit according to IEC 950 Power via faston or M4-screw Rear I/0 on 8 Slots ATX-supply Rear view auxiliary signals V(I/O)-selection 262.05 -0,3 mm Line power 2 auxiliary signals 2x power supply connector for drives (hard disk/floppy/CD-ROM) V(I/O)-selection 2x fan connector Line power 1 115 VAC / 230 VAC 222.5 -0,3 mm Printed in Germany · Subject to modification without prior notice. Front view www.ERNI.com/contact/ Catalog E 074500 10/03 Edition 3 6 U CompactPCI Backplane with 8 Slots State of the art design for a wide range of applications General Description This standard backplane is member of the ERNI backplane familiy for use in Compact PCI computer systems. Its highperformance features make it ideally suited for telecom, datacom, and industrial applications like CNCs, robotic controls, and video image processing. • • • • • ERNI develops and manufactures backplanes according to ISO 9001 at three productions sites around the world. • • • Custom and semi-custom designs based on our standard backplanes are possible in various configurations. • • Part No: 163069 (with upper P47-connector only) Part No: 193938 (with upper and lower P47-connectors) • • • • Features • • Form factor 6 U Dimension (WxH): 202.2 mm x 262.05 mm • 8 slots, 7 peripheral slots; system slot on right hand side • www.ERNI.com/contact/ Catalog E 074517 06/02 Edition 2 • Operates at 33 MHz clock frequency Full 64-bit implementation Rear Panel I/O on P3, P4, P5 at all Slots A and AB-shrouds with guides for safe mating of rear I/O transition modules Controlled impedance of 65 Ohm realized by stripline-technology Hot-swap features according to PICMG 2.1 R2.0 Best decoupling of supply voltages High-quality design with best EMC-characteristics by fully shielded 10-layer PCB Flexible grounding to chassis by fixing screws Connectors according to IEC 61076-4-101 and PICMG 2.0 R3.0 V(I/O) selectable by jumper element: 3.3 V or 5 V 2 connectors for fans with 12V power supply, additional 2 connectors for fan temperature control by NTC 2 connectors for drives with 5V/12V supply For use with modular power supply according to PICMG 2.11 R1.0 Mounting holes for stiffening bar to prevent deflection during insertion and extraction of boards Extension/cascading feature with system slot left backplane and power backplane Accessories available: power backplane, power bridge V(I/O)-selection 5V Rear view VIO 3,3V Power supply connector for drive (hard disk / floppy / CD-Rom) GND +5V GND +12V JP4 +12V -12V +3V3 NTC2 +5V FAN2 connectors for Fan and temp. control by NTC GND Mounting holes for stiffening bar PRST INH Auxiliary Signals VIO GND +12V 5V +5V 3,3V VIO FAN 1 connectors for Fan and temp. control by NTC GND GND NTC 1 5V +5V +5V Power supply connector for drive (hard disk / floppy / CD-Rom) IPMB1 3,3V +3V3 +3V3 System-Management Bus according to PICMG 2.9 VIO IPMB0 -12V +12V +12V -12V connections for extension to other modular backplanes 202.2 Front view z a b c d e f 22 L Rear Panel I/O N P E 44 21 1 25 20 Printed in Germany · Subject to modification without prior notice. Rear Panel I/O 1 2 1 19 262.05 Rear Panel I/O 1 22 CompactPCI 64-Bit Bus L N P E 44 21 GND 20 CompactPCI 32-Bit Bus 1 25 +5V +3V3 +12V 2 1 -12V 1 Positronic 47-Pin connector for Power supplies according to PICMG 2.11 Rev 1.0 System Slot www.ERNI.com/contact/ Catalog E 074517 06/02 Edition 2