6 U CompactPCI Backplane with 18 Slots State of the art design for a wide range of applications Image for visualization only General Description Features This standard backplane is member of the ERNI backplane familiy for use in Compact PCI computer systems. Its highperformance features make it ideally suited for telecom, datacom, and industrial applications like CNCs, robotic controls, and video image processing. • Form factor 6 U Dimension (WxH): 425.72 mm x 262.05 mm • 18 slots arranged in three independent cPCI bus segments ready for optional bridge module: transparent pallet bridge module part no 193627 non-transparent pallet bridge module part no 193629 • Operates at 33 MHz clock frequency • Full 64-bit implementation at all slots • Terminated cPCI Bus reserved signals on both ends of the backplane • Rear Panel I/O on P3, P4, P5 at all Slots • A and AB-shrouds with guides for safe mating of rear I/O transition modules • Controlled impedance of 65 Ohm realized by striplinetechnology • Hot-swap features according to PICMG 2.1 R2.0 • Best decoupling of supply voltages • High-quality design with best EMC-characteristics by fully shielded PCB • Flexible grounding to chassis by fixing screws • Connectors according to IEC 61076-4-101 and PICMG 2.0 R3.0, assembled with upper connector, lower connector: for optional assembly only • V(I/O) selectable by jumper element: 3.3 V or 5 V, default 3.3V • Connector for fans with 12V power supply • Connector for drive with 5V/12V supply • For use with modular power supply according to PICMG 2.11 R1.0 The inherent limitations of Compact PCI are broken by the use of PCI-to-PCI-bridges. Optional this backplane may be used to implement a two-bus multiprocessor system when equipped with a non-transparent bridge module. ERNI develops and manufactures backplanes according to ISO 9001 at several productions sites around the world. Custom and semi-custom designs based on our standard backplanes are possible in various configurations. Part No: 163745 excluding bridge module Catalog E 074562 07/06 Edition 1 www.erni.com Edition 1 zabcdef 2 zabcdef 1 3 zabcdef 4 zabcdef 2. secondary cPCI 64 BitBus 5 zabcdef 6 zabcdef 7 zabcdef 8 zabcdef 9 zabcdef zabcdef 11 zabcdef 10 1. secondary cPCI 64 BitBus Rear Panel I/O Rear Panel I/O Rear Panel I/O 12 zabcdef 13 zabcdef 14 zabcdef 15 zabcdef 16 zabcdef 1 17 zabcdef Primary cPCI 64 BitBus 18 zabcdef 1 1 25 1 22 1 19 1 25 25 N L PE N L X2 PE 42 21 44 23 20 2 44 19 1 42 21 X1 20 23 19 07/06 1 Catalog E 074562 2 425,72 6 U CompactPCI Backplane with 18 Slots Front view Positronic 47-pin connector for power supplies according to PICMG 2.11 Rev 1.0 System Slot 262,05 www.erni.com 6 U CompactPCI Backplane with 18 Slots Rear view termination resistors for cPCI bus reserved signals position for 64 Bit pallet bridge termination resistors for cPCI bus reserved signals JP5 IPMB1 INH VIO +3,3V PRST +5V IPMB0 Auxiliary signals connector for fans +3V3 +5V GND +5V GND +12V GND +12V -12V Edition 1 www.erni.com -12V +3V3 +5V GND 07/06 connector for drive (hard disk / floppy / CD-ROM +12V Catalog E 074562 optional power supply via M3 srew stud GND System Management Bus according to PICMG 2.9 JP3 V(I/O)-selection optional power supply via M3 srew stud Printed in Germany · Subject to modification without prior notice. position for 64 Bit pallet bridge