3 U CompactPCI Backplane with 10 Slots State of the art design for a wide range of applications Image for visualization only General Description Features This standard backplane is member of the ERNI backplane family for use in Compact PCI computer systems. Its highperformance features make it ideally suited for telecom, datacom, and industrial applications like CNCs, robotic controls, and video image processing. • Form factor 3 U Dimension (WxH): 222.52 mm x 128.7 mm • 10 slots arranged in two cPCI bus segments, secondary segment operating through transparent pallet bridge module (part no. 166039) • All slots in both segments with 32-bit implementation • All slots with rear I/O capability, slots 4 to 8 with mechanical constraints due to pallet bridge module • AB-shrouds with guides for safe mating of rear I/O transition modules • Controlled impedance of 65 Ohm implemented in striplinetopology • Hot-swap features according to PICMG 2.0 R3.0 and PICMG 2.1 R2.0 • Best decoupling of supply voltages • High-quality design with best EMC-characteristics by fully shielded PCB • Isolated or chassis-grounded mounting selected by screws • Connectors according to IEC 61076-4-101 and PICMG 2.0 R3.0 • V(I/O) selectable by jumper element: 3.3 V or 5 V • DIN Type M connector for modular power supply according to PICMG 2.11 R1.0 • Auxiliary signals accessible via header • Secure separation between hazardous voltages in mains supply and SELV circuit according to IEC 950 The inherent limitations of Compact PCI are broken by the use of a PCI-to-PCI-bridge. ERNI develops and manufactures backplanes according to ISO 9001 at several productions sites around the world. Custom and semi-custom designs based on our standard backplanes are possible in various configurations. Part No: 166295 including bridge module 166039 Catalog E 074565 07/06 Edition 1 www.erni.com 3 U CompactPCI Backplane with 10 Slots Rear view V(I/O)-selection auxiliary signals auxiliary signals VIO GND INH# GND EN# +5V GND +3V3 GND GND +5V +5V +3V3 +3V3 -12V -12V +12V +12V LP-Nr 166064 Made in Germany PRST# DEG# FAL# +5V positions for pallet bridge module 166039 connections for extension to other modular backplanes, includes system management bus according to PICMG 2.9 Front view 222,52 VIO +5V Rear Panel I/O 1 1 1 1 1 1 1 1 1 128.7 1 GND GND +5V +5V a c b 1 CompactPCI 32-Bit Bus zabcdef 1 +3V3 +3V3 -12V -12V +12V +12V 1 1 1 1 1 1 1 1 1 zabcdef zabcdef zabcdef zabcdef zabcdef zabcdef zabcdef zabcdef zabcdef 2 3 4 5 6 7 8 9 10 1 System Slot Type M connector for power supplies according to PICMG 2.11 Rev. 1.0 Catalog E 074565 07/06 Edition 1 www.erni.com Printed in Germany · Subject to modification without prior notice. 32 +3V3