3 U CompactPCI Backplane with 8 Slots State of the art design for a wide range of applications General Description Features This standard backplane is member of the ERNI backplane familiy for use in Compact PCI computer systems. Its highperformance features make it ideally suited for telecom, datacom, and industrial applications like CNCs, robotic controls, and video image processing. • Form factor 3 U Dimension (WxH): 171.5 mm x 128.7 mm • 8 slots, 7 peripheral slots; system slot on left side • PCI signal termination according to PICMG 2.0 • Operates at 33 MHz clock frequency • Full 64-bit implementation • Controlled impedance of 65 Ohm realized by stripline-technology • Best decoupling of supply voltages • High-quality design with best EMC-characteristics by fully shielded 10-layer PCB • Connectors according to IEC 61076-4-101 and PICMG 2.0 • V(I/O) selectable by wiring: 3.3 V or 5 V • Power supply connection via Faston or M4 screw • Auxilliary signals accessible at 5-pin header ERNI develops and manufactures backplanes according to ISO 9001 at three productions sites around the world. Custom and semi-custom designs based on our standard backplanes are possible in various configurations. Part No: 073704 www.ERNI.com/contact/ Catalog E 074510 10/01 Edition 1 Rear view Power for +5V, +3.3V, V(I/O) Auxiliary signals Power for GND, +12V, -12V 171,5 Front view Printed in Germany · Subject to modification without prior notice. 22 128,7 CompactPCI 64-Bit Bus 1 25 CompactPCI 32-Bit Bus 1 System Slot www.ERNI.com/contact/ Catalog E 074510 10/01 Edition 1 3 U CompactPCI Backplane with 8 Slots State of the art design for a wide range of applications General Description Features This standard backplane is member of the ERNI backplane familiy for use in Compact PCI computer systems. Its highperformance features make it ideally suited for telecom, datacom, and industrial applications like CNCs, robotic controls, and video image processing. • Form factor 3 U Dimension (WxH): 176.3 mm x 128.7 mm • 8 slots, 7 peripheral slots; system slot on right side • PCI signal termination according to PICMG 2.0 • Operates at 33 MHz clock frequency • Full 64-bit implementation • Controlled impedance of 65 Ohm realized by striplinetechnology • Best decoupling of supply voltages • High-quality design with best EMC-characteristics by fully shielded 10-layer PCB • Connectors according to IEC 61076-4-101 and PICMG 2.0 • V(I/O) selectable by wiring: 3.3 V or 5 V • Power supply connection via Faston or M4 screw • Auxilliary signals accessible at 5-pin header ERNI develops and manufactures backplanes according to ISO 9001 at three productions sites around the world. Custom and semi-custom designs based on our standard backplanes are possible in various configurations. Part No: 073743 www.ERNI.com/contact/ Catalog E 074516 10/01 Edition 1 Auxiliary signals Power for +5V, +3.3V, V(I/O) Rear view Power for GND, +12V, -12V 176,3 Front view 128,7 CompactPCI 64-Bit Bus 1 25 CompactPCI 32-Bit Bus 1 System Slot www.ERNI.com/contact/ Catalog E 074516 10/01 Edition 1 Printed in Germany · Subject to modification without prior notice. 22 3 U Compact PCI Backplane with 8 Slots State of the art design for a wide range of applications General Description This standard backplane is member of the ERNI backplane familiy for use in Compact PCI computer systems. Its highperformance features make it ideally suited for telecom, datacom, and industrial applications like CNCs, robotic controls, and video image processing. ERNI develops and manufactures backplanes according to ISO 9001 at three productions sites around the world. Custom and semi-custom designs based on our standard backplanes are possible in various configurations. Part No: 073916 Features • Form factor 3 U Dimension (WxH): 197.1 mm x 128.7 mm • 8 slots, 7 peripheral slots; system slot on right side www.ERNI.com/contact/ Catalog E 074503 10/01 Edition 2 • PCI signal termination according to PICMG 2.0 • Operates at 33 MHz clock frequency • 6 slots full 64-bit implementation, 2 slots 32-bit implementation • Rear I/O via P2 of physical slots 1 and 2 • AB-shrouds with guides for safe mating of rear I/O transition modules • Controlled impedance of 65 Ohm realized by striplinetechnology • Best decoupling of supply voltages • High-quality design with best EMC-characteristics by fully shielded 10-layer PCB • Flexible grounding to chassis by fixing screws • Connectors according to IEC 61076-4-101 and PICMG 2.0 • V(I/O) selectable by jumper element: 3.3 V or 5 V • 1 connector for fans with 12 V supply • 2 connectors for drives with 5 V/12 V supply • Power supply options: DIN style M connector according to PICMG 2.11 R1.0 optional connection via Faston or M4-screw • Auxilliary signals accessible via headers • Secure separation between hazardous voltages in mains supply and SELV circuit according to IEC 950 Rear Panel I/O Power for GND, +5V, +3,3V, (I/O) and GND by Fastons or M4 screw Rear view 3,3V GND 3,3V 3,3V 3,3V VIO 3,3V +5V VIO +5V +5V +5V +5V GND 3U Backplane 8SRM auxiliary signals +5V V(I/O)-selection VIO CompactPCI TM 3,3V Line power 115 VAC / 230 VAC +12V GND GND +5V -12V +12V -12V +12V Made in +5V GND GND GND +12V GND VIO VIO 3,3V Germany connector for fan Power for GND, +12V, -12V by Fastons or M4 screw 2x Power for Drives (HD, Floppy, CD-rom) Front view 197,1 z a b c d e f CompactPCI 64-Bit Bus CompactPCI TM 128,7 +5V GND Rear Panel I/O Printed in Germany · Subject to modification without prior notice. 22 1 N PE 25 L CompactPCI 32-Bit Bus 1 1 2 3 4 DIN Style M connector for power supplies according to PICMG 2.11 Rev 1.0 5 6 7 8 System Slot www.ERNI.com/contact/ Catalog E 074503 10/01 Edition 2 3 U CompactPCI Backplane with 8 Slots State of the art design for a wide range of applications General Description This standard backplane is member of the ERNI backplane familiy for use in Compact PCI computer systems. Its highperformance features make it ideally suited for telecom, datacom, and industrial applications like CNCs, robotic controls, and video image processing. ERNI develops and manufactures backplanes according to ISO 9001 at three productions sites around the world. Custom and semi-custom designs based on our standard backplanes are possible in various configurations. Part No: 163059 Features • Form factor 3 U Dimension (WxH): 202.2 mm x 128.7 mm • 8 slots, 7 peripheral slots; system slot on right hand side Operates at 33 MHz clock frequency www.ERNI.com/contact/ Catalog E 074527 06/02 Edition 1 • 32-bit implementation • Rear Panel I/O on P2 at all Slots • AB-shrouds with guides for safe mating of rear I/O transition modules • Controlled impedance of 65 Ohm realized by stripline-technology • Hot-swap features according to PICMG 2.1 R2.0 • Best decoupling of supply voltages • High-quality design with best EMC-characteristics by fully shielded 10-layer PCB • Flexible grounding to chassis by fixing screws • Connectors according to IEC 61076-4-101 and PICMG 2.0 R3.0 • V(I/O) selectable by jumper element: 3.3 V or 5 V • Connector for fans with 12V power supply, additional connector for fan temperature control by NTC • Connector for drives with 5V/12V supply • For use with modular power supply according to PICMG 2.11 R1.0 • Extension/cascading feature with system slot left backplane and power backplane • Accessories available: power backplane, power bridge Rear view connectors for fan and temp. control by NTC V(I/O)-selection +5V VIO INH +3,3V JP5 auxiliary signals +5V GND +12V NTC1 cPCI 3U 8Slot SRP 2.0R3.0 PRST FAN1 Made in Germany LP-Nr 163060 IPMB0 power supply connector for drive (hard disk/ floppy/CD-Rom) System Management Bus according to PICMG 2.9 GND GND +5V +5V +3V3 +3V3 -12V -12V +12V +12V connections for extension to other modular backplanes Front view 202.2 VIO +5V JP5 +3,3V 42 21 Rear Panel I/O 1 1 1 1 1 1 1 1 GND CompactPCI 32-Bit Bus +5V +3V3 1 2 -12V +12V 1 1 1 1 1 1 1 1 P1 1 2 3 Positronic 47-pin connector for power supplies according to PICMG 2.11 Rev. 1.0 4 5 6 7 8 System Slot www.ERNI.com/contact/ Catalog E 074527 06/02 Edition 1 Printed in Germany · Subject to modification without prior notice. 44 23 20 19 128.7 45 46 47 z a b c d e f 3 U CompactPCI Backplane with 8 Slots State of the art design for a wide range of applications General Description This standard backplane is member of the ERNI backplane familiy for use in Compact PCI computer systems. Its highperformance features make it ideally suited for telecom, datacom, and industrial applications like CNCs, robotic controls, and video image processing. • • • • • • ERNI develops and manufactures backplanes according to ISO 9001 at three productions sites around the world. Custom and semi-custom designs based on our standard backplanes are possible in various configurations. Part No: 193485 • • • • • • Features • Form factor 3 U Dimension (WxH): 197.1 mm x 128.7 mm • 8 slots, 7 peripheral slots; system slot on right side • PCI signal termination according to PICMG 2.0 www.ERNI.com/contact/ Catalog E 074523 • • 10/01 Edition 1 • • Operates at 33 MHz clock frequency 32-bit implementation Rear I/O via P2 on all slots AB-shrouds with guides for safe mating of rear I/O transition modules Controlled impedance of 65 Ohm realized by striplinetechnology Hot-swap features according to PICMG 2.0 R3.0 and PICMG 2.1 R1.0 Best decoupling of supply voltages High-quality design with best EMC-characteristics by fully shielded 10-layer PCB Flexible grounding to chassis by fixing screws Connectors according to IEC 61076-4-101 and PICMG 2.0 R3.0 V(I/O) selectable by jumper element: 3.3 V or 5 V 1 connector for fan with 12 V supply 2 connectors for drives with 5 V/12 V supply DIN style M connector for power supply according to PICMG 2.11 R1.0 Auxilliary signals accessible via headers Secure separation between hazardous voltages in mains supply and SELV circuit according to IEC 950 Rear Panel I/O on all Slots Rear view VIO Auxiliary signals +5V +3.3V VIO V(I/O) Selection +5V +3.3V VIO Line Power Connector for Fan 2 x Power for Drives / HD, Floppy, CD-Rom) 197.1 Front view 22 1 128.7 25 CompactPCI 32-Bit Bus 1 DIN Style M Connector for power supplies according to PICMG 2.11 Rev. 1.0 System Slot www.ERNI.com/contact/ Catalog E 074523 10/01 Edition 1 Printed in Germany · Subject to modification without prior notice. Rear Panel I/O