STGB19NC60W STGP19NC60W, STGW19NC60W 19 A - 600 V - ultra fast IGBT Features ■ High frequency operation ■ Low CRES / CIES ratio (no cross-conduction susceptibility) 3 1 Applications 2 D2PAK ■ High frequency motor controls, inverters, UPS ■ HF, SMPS and PFC in both hard switch and resonant topologies TO-247 3 1 2 TO-220 Description This IGBT utilizes the advanced PowerMESH™ process resulting in an excellent trade-off between switching performance and low on-state behavior. Table 1. 3 1 Figure 1. Internal schematic diagram Device summary Order codes Marking Package Packaging STGB19NC60WT4 GB19NC60W D2PAK Tape and reel STGP19NC60W P19NC60W TO-220 Tube STGW19NC60W W19NC60W TO-247 Tube November 2008 Rev 3 1/16 www.st.com 16 Contents STGB19NC60W - STGP19NC60W - STGW19NC60W Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................ 6 3 Test circuit 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 5 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 2/16 ................................................ 9 STGB19NC60W - STGP19NC60W - STGW19NC60W 1 Electrical ratings Electrical ratings Table 2. Absolute maximum ratings Value Symbol Parameter Unit D2PAK TO-247 TO-220 VCES Collector-emitter voltage (VGE = 0) IC(1) Collector current (continuous) at TC = 25°C 40 42 A IC(1) Collector current (continuous) at TC = 100°C 22 23 A (2) 600 V Turn-off latching current 30 A VGE Gate-emitter voltage ±20 V PTOT Total dissipation at TC = 25°C ICL Tj Operating junction temperature 130 140 -65 to 150 W °C 1. Calculated according to the iterative formula: T j ( max ) – T C I C ( T C ) = --------------------------------------------------------------------------------------------------------R thj – c × V CE ( sat ) ( max ) ( T j ( max ), I C ( T C ) ) 2. VCLAMP = 80% (VCES), VGE = 15 V, RG = 10 Ω, TJ = 150 °C Table 3. Thermal resistance Value Symbol Parameter D2PAK TO-220 Unit TO-247 Rthj-case Thermal resistance junction-case max 0.95 0.9 °C/W Rthj-amb Thermal resistance junction-ambient max 62.5 50 °C/W 3/16 Electrical characteristics 2 STGB19NC60W - STGP19NC60W - STGW19NC60W Electrical characteristics (TCASE=25°C unless otherwise specified) Table 4. Symbol Static Parameter Collector-emitter V(BR)CES breakdown voltage (VGE= 0) IC= 1 mA Max. 600 Unit V 5.75 V VCE= 600 V VCE= 600 V, TC= 125°C 150 1 µA mA Gate-emitter leakage current (VCE = 0) VGE= ± 20 V ±100 nA Forward transconductance VCE = 15 V, IC= 12 A VGE(th) Gate threshold voltage VCE= VGE, IC= 250 µA ICES Collector cut-off current (VGE = 0) IGES Symbol Typ. V V Collector-emitter saturation VGE= 15 V, IC= 12 A voltage VGE= 15V, IC=12A, Tc=125°C Table 5. Min. 2.5 VCE(sat) gfs 4/16 Test conditions 2.1 1.8 3.75 10 S Dynamic Parameter Test conditions Min. Typ. Max. Unit Cies Coes Cres Input capacitance Output capacitance Reverse transfer capacitance VCE = 25 V, f = 1MHz, VGE = 0 1180 130 26 pF pF pF Qg Qge Qgc Total gate charge Gate-emitter charge Gate-collector charge VCE = 390 V, IC = 12 A, VGE = 15 V, Figure 16 53 10 21 nC nC nC STGB19NC60W - STGP19NC60W - STGW19NC60W Table 6. Symbol td(on) tr (di/dt)on td(on) tr (di/dt)on tr(Voff) td(off) tf tr(Voff) td(off) tf Table 7. Symbol Eon(1) Eoff(2) Ets Eon(1) Eoff(2) Ets Electrical characteristics Switching on/off (inductive load) Parameter Turn-on delay time Current rise time Turn-on current slope Turn-on delay time Current rise time Turn-on current slope Off voltage rise time Turn-off delay time Current fall time Off voltage rise time Turn-off delay time Current fall time Test conditions Min. VCC = 390 V, IC = 12 A RG= 10 Ω, VGE= 15 V, Figure 17 VCC = 390 V, IC = 12 A RG= 10 Ω, VGE= 15 V, TC = 125°C Figure 17 VCC = 390 V, IC = 12 A RG= 10 Ω, VGE= 15 V, Figure 17 VCC = 39 0V, IC = 12 A RG= 10 Ω, VGE= 15 V, TC = 125°C Figure 17 Typ. Max. Unit 25 7 1600 ns ns A/µs 25 8 1400 ns ns A/µs 22 90 43 ns ns ns 47 127 77 ns ns ns Switching energy (inductive load) Parameter Turn-on switching losses Turn-off switching losses Total switching losses Turn-on switching losses Turn-off switching losses Total switching losses Test conditions VCC = 390 V, IC = 12 A RG= 10 Ω, VGE= 15 V, Figure 17 VCC = 390 V, IC = 12 A RG= 10 Ω, VGE= 15 V, TC = 125°C Figure 17 Min. Typ. Max. Unit 81 125 206 µJ µJ µJ 161 255 416 µJ µJ µJ 1. Eon is the turn-on losses when a typical diode is used in the test circuit in Figure 15 If the IGBT is offered in a package with a co-pak diode, the co-pack diode is used as external diode. IGBTs & Diode are at the same temperature (25°C and 125°C) 2. Turn-off losses include also the tail of the collector current 5/16 Electrical characteristics STGB19NC60W - STGP19NC60W - STGW19NC60W 2.1 Electrical characteristics (curves) Figure 2. Output characteristics Figure 3. Transfer characteristics Figure 4. Transconductance Figure 5. Collector-emitter on voltage vs temperature Figure 6. Gate charge vs gate-source voltage Figure 7. 6/16 Capacitance variations STGB19NC60W - STGP19NC60W - STGW19NC60W Figure 8. Normalized gate threshold voltage vs temperature Figure 10. Normalized breakdown voltage vs temperature Figure 9. Electrical characteristics Collector-emitter on voltage vs collector current Figure 11. Switching losses vs temperature Figure 12. Switching losses vs gate resistance Figure 13. Switching losses vs collector current 7/16 Electrical characteristics Figure 14. Turn-off SOA 8/16 STGB19NC60W - STGP19NC60W - STGW19NC60W STGB19NC60W - STGP19NC60W - STGW19NC60W 3 Test circuit Test circuit Figure 15. Test circuit for inductive load switching Figure 16. Gate charge test circuit Figure 17. Switching waveform 9/16 Package mechanical data 4 STGB19NC60W - STGP19NC60W - STGW19NC60W Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 10/16 STGB19NC60W - STGP19NC60W - STGW19NC60W Package mechanical data D²PAK (TO-263) mechanical data mm inch Dim Min A A1 b b2 c c2 D D1 E E1 e e1 H J1 L L1 L2 R V2 Typ 4.40 0.03 0.70 1.14 0.45 1.23 8.95 7.50 10 8.50 Max Min 4.60 0.23 0.93 1.70 0.60 1.36 9.35 0.173 0.001 0.027 0.045 0.017 0.048 0.352 0.295 0.394 0.334 10.40 2.54 4.88 15 2.49 2.29 1.27 1.30 Max 0.181 0.009 0.037 0.067 0.024 0.053 0.368 0.409 0.1 5.28 15.85 2.69 2.79 1.40 1.75 0.192 0.590 0.099 0.090 0.05 0.051 8° 0° 0.4 0° Typ 0.208 0.624 0.106 0.110 0.055 0.069 0.016 8° 0079457_M 11/16 Package mechanical data STGB19NC60W - STGP19NC60W - STGW19NC60W TO-220 mechanical data mm inch Dim Min A b b1 c D D1 E e e1 F H1 J1 L L1 L20 L30 ∅P Q 12/16 Typ 4.40 0.61 1.14 0.48 15.25 Max Min 4.60 0.88 1.70 0.70 15.75 0.173 0.024 0.044 0.019 0.6 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 1.27 10 2.40 4.95 1.23 6.20 2.40 13 3.50 Max 0.181 0.034 0.066 0.027 0.62 0.050 16.40 28.90 3.75 2.65 Typ 0.409 0.106 0.202 0.051 0.256 0.107 0.551 0.154 0.645 1.137 3.85 2.95 0.147 0.104 0.151 0.116 STGB19NC60W - STGP19NC60W - STGW19NC60W Package mechanical data TO-247 Mechanical data mm. Dim. A Min. 4.85 A1 2.20 2.60 b 1.0 1.40 b1 2.0 2.40 b2 3.0 3.40 c 0.40 0.80 D 19.85 20.15 E 15.45 15.75 e Typ Max. 5.15 5.45 L 14.20 L1 3.70 L2 14.80 4.30 18.50 øP 3.55 3.65 øR 4.50 5.50 S 5.50 13/16 Packaging mechanical data 5 STGB19NC60W - STGP19NC60W - STGW19NC60W Packaging mechanical data D 2 PAK FOOTPRINT TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. mm MIN. A B 1.5 C 12.8 D 20.2 G 24.4 N 100 T TAPE MECHANICAL DATA DIM. 14/16 mm inch MIN. MAX. MIN. A0 10.5 10.7 0.413 0.421 MAX. B0 15.7 15.9 0.618 0.626 D 1.5 1.6 0.059 0.063 D1 1.59 1.61 0.062 0.063 E 1.65 1.85 0.065 0.073 0.449 0.456 F 11.4 11.6 K0 4.8 5.0 0.189 0.197 P0 3.9 4.1 0.153 0.161 P1 11.9 12.1 0.468 0.476 P2 1.9 2.1 0.075 0.082 R 50 1.574 T 0.25 0.35 0.0098 0.0137 W 23.7 24.3 0.933 0.956 inch MAX. MIN. MAX. 330 12.992 13.2 0.504 0.520 26.4 0.960 1.039 0.059 0795 3.937 30.4 1.197 BASE QTY BULK QTY 1000 1000 STGB19NC60W - STGP19NC60W - STGW19NC60W 6 Revision history Revision history Table 8. Document revision history Date Revision Changes 04-Oct-2006 1 Initial release. 08-May-2007 2 Modified value on Table 2 20-Nov-2008 3 Inserted packages: D2PAK and TO-247 15/16 STGB19NC60W - STGP19NC60W - STGW19NC60W Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2008 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 16/16