Tape Information Vishay Siliconix TO−263 (D2PAK): 3− AND 5−LEAD See Note 6 Ĭ 1.5 ) 0.1 –0.0 0.30"0.05 See Note 1 2.0"0.1 4.0 A E R 0.3 max 1.0 0.8 (ref) F See Note 6 0.3 B0 W 10.8 K1 K0 A Ĭ 1.50 min 16.0 R 0.5 typ A0 Section A-A NOTES: 1. 10 sprocket hole pitch cumulative tolerance "0.2. 2. Camber not to exceed 1 mm in 100 mm. 3. Material: Static dissipative black Advantek polystyrene. 4. A0 and B0 measured on a plane 0.3 mm above the bottom of the pocket. 5. K0 measured from a plane on the inside bottom of the pocket to the top surface of the carrier. 6. Pocket position relative to sprocket hole measured as true position of pocket, not pocket hole. 7. Centerline of the component cavity is to be located midway between a pair of sprocket holes. 8. All sizes in mm unless specified. AO = 10.6 mm " 0.1 BO = 16.5 mm " 0.1 KO = 4.9 mm " 0.1 K1 = 3.4 mm " 0.1 E = 1.75 mm " 0.1 F = 11.5 mm " 0.1 W = 24.0 mm " 0.3 QUANTITY PER REEL 800 ECN: T-01227—Rev. E, 22-Oct-01 DWG: 90-2342-x Document Number: 71218 18-Oct-01 www.vishay.com 1