PM070WU1 Version: 2.0 TECHNICAL SPECIFICATION MODEL NO. : PM070WU1 The content of this information is subject to be changed without notice. Please contact PVI or its agent for further information Customer’s Confirmation Customer Date By PVI’s Confirmation FOR MORE INFORMATION: AZ DISPLAYS, INC. 75 COLUMBIA, ALISO VIEJO, CA 92656 Http://www.AZDISPLAYS.com The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:1 PM070WU1 Revision History Rev. 0.1 Issued Date Jan 15, 2009 0.2 Jan 20, 2009 0.3 Mar 24, 2009 1.0 Apr 09, 2009 2.0 Sep 18, 2009 Revised Contents Preliminary Modify Page 6 4. Mechanical Drawing of TFT-LCD Module: Pin direction Modify Page 5 4. Mechanical Drawing of TFT-LCD Module Modify Page 9 7-2) Recommended Driving Condition for Back Light Modify Page 15 13. Optical Characteristics: Contrast Ratio &Viewing Angle data Add Page 15 13. Optical Characteristics: Brightness data &White Chromaticity Add Page 20 16. Packing Diagram Add Page 9 7-2) Recommended Driving Condition for Back Light: Supply voltage of LED backlight Add Page 11 10. Block Diagram Modify Page 12 11. Interface Timing Modify Page5~6 4. Mechanical Drawing of TFT-LCD Module The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:2 PM070WU1 TECHNICAL SPECIFICATION CONTENTS NO. ITEM PAGE - Cover Revision History Contents Application Features Mechanical Specifications Mechanical Drawing of TFT-LCD module Input Terminals Absolute Maximum Ratings Electrical Characteristics Pixel Arrangement Display Color and Gray Scale Reference Block Diagram Interface Timing Power On Sequence Optical Characteristics Handling Cautions Reliability Test Packing Diagram 1 2 3 4 4 4 5 7 8 8 9 10 11 12 15 15 18 19 20 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:3 PM070WU1 1. Application This data sheet applies to a color TFT LCD module, PM070WU1.The application of panel are OA product, which requires high quality flat panel display. Prime View assumes no responsibility for any damage resulting from the use of the device which does not complies with the instructions and the precautions in these specification sheets. 2. Features . Wide VGA (800*480 pixels) resolution . Amorphous silicon TFT LCD panel with LED back-light unit . Pixel in stripe configuration . Thin and light weight . Display Colors：262,144 colors . +3.3V DC supply voltage for TFT LCD panel driving . Wide viewing angle . TTL transmission interface 3. Mechanical Specifications Parameter Screen Size Display Format Display Colors Active Area Pixel Pitch Pixel Configuration Outline Dimension Weight Back-light Surface treatment Display mode Gray scale inversion direction Specifications 7.0(diagonal) 800×(R, G, B)×480 262,144 152.4(H)×91.44(V) 0.1905(H)×0.1905(V) Stripe 166.3(W)×105.5 (H)×10.0(D) (typ.) 244+15 33-LED Anti-glare and EWV Film Normally white 6 o’clock Unit inch dot mm mm mm g Note 13-1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:4 PM070WU1 4. Mechanical Drawing of TFT-LCD Module The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:5 PM070WU1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:6 PM070WU1 5. Input Terminals 5-1) TFT-LCD Panel Driving Connector type: ELCO 6210-30P Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Symbol CLK Hsync Vsync GND R0 R1 R2 R3 R4 R5 GND G0 G1 G2 G3 G4 G5 GND B0 B1 B2 B3 B4 B5 GND DENB VCC VCC R/L U/D Function Clock Signal for Sampling Image Digital Data Horizontal Synchronous Signal Vertical Synchronous Signal Ground (0V) Red Image Data Signal (LSB) Red Image Data Signal Red Image Data Signal Red Image Data Signal Red Image Data Signal Red Image Data Signal (MSB) Ground (0V) Green Image Data Signal (LSB) Green Image Data Signal Green Image Data Signal Green Image Data Signal Green Image Data Signal Green Image Data Signal (MSB) Ground (0V) Blue Image Data Signal (LSB) Blue Image Data Signal Blue Image Data Signal Blue Image Data Signal Blue Image Data Signal Blue Image Data Signal (MSB) Ground (0V) Compound Synchronization signal DC +3.3V Power Supply DC +3.3V Power Supply Left / Right control for source driver Up / Down control for gate driver Remark Note5-1 Note5-2 Note5-2 Note5-1: DENB input signal. If customer wanted to off the DENB mode, you must keep the DENB always High or Low. 1 0 5 6 tc 8 0 0 tc DENB (tc: the period of sampling clock) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:7 PM070WU1 Note 5-2: The definitions of U/D & R/L 6. Absolute Maximum Ratings: Parameters Supply Voltage Input Signals Voltage Storage Temperature Operation Temperature Symbol VCC VIN Tst Top MIN. -0.3 -0.3 -40 -30 MAX. +4.0 VCC +0.3 +85 +80 Unit V V GND=0V, Ta=25 Remark 7. Electrical Characteristics 7-1) Recommended Operating Conditions: GND = 0V，Ta = 25 Item Supply Voltage Current Dissipation Total power consumption Symbol Min. Typ. Max. Unit Remark VCC 3.0 3.3 3.6 V 110 165 mA Note7-1 ICC 363 544.5 mW Vcc=3.3V Pcc VCC High Level VIN 0.7 VCC mV Digital input voltage 0.2VCC Low Level VIL -0.1 Note 7-1: To test the current dissipation of VCC using the “color bars” testing pattern shown as below 1 2 3 4 5 6 7 8 1. 2. 3. 4. 5. 6. 7. 8. White Yellow Cyan Green Magenta Red Blue Black ICC current dissipation testing pattern The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:8 PM070WU1 7-2) Recommended Driving Condition for Back Light Ta = 25 Remark Note 7-2 Note 7-3 Note 7-2 /Note 7-4 Parameter Symbol Min TYP MAX Unit Supply voltage of LED backlight VLED1~11 (11) V Supply current of LED backlight ILED1~11 16 mA Backlight Power Consumption PLED 1.94 W Note 7-2: ILED= 16mA, constant current Note 7-3: The LED driving condition is defined for each LED module. (3 LED Serial) Input current = 16mA * 11 = 176mA Note 7-4: PLED = VLED1 * ILED1 + VLED2 * ILED2…. + VLED10 * ILED10+VLED11 * ILED11 7-3) Backlight driving Connector type: JST BHSR-02VS-1N, PIN No 2 pin Pin No 1 2 Symbol + - Description Input terminal (Anode) Input terminal (Cathode) Remark Wire color : Red Wire Color : Black 8. Pixel Arrangement R G B R G B R G B 1 st Line RGB R G B R G B 2 nd Line RGB R G B 3 rd Line RGB 1 st Pixel 800 th Pixel 1 Pixel = R G B RGB 478 th Line RGBRGB RGB 479 th Line RGBRGBRGB 480 th Line RGB RGB The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:9 PM070WU1 9. Display Color and Gray Scale Reference Color Input Color Data Green Red Blue R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0 Basic Colors Red Green Blue Black Red (63) Green (63) Blue (63) Cyan Magenta Yellow White Red (00) Red (01) Red (02) Darker ↓ Brighter Red (61) Red (62) Red (63) Green (00) Green (01) Green (02) Darker ↓ Brighter Green (61) Green (62) Green (63) Blue (00) Blue (01) Blue (02) Darker ↓ Brighter Blue (61) Blue (62) Blue (63) 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 0 1 1 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 0 1 1 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 0 1 1 1 0 1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:10 PM070WU1 10. Block Diagram The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:11 PM070WU1 11. Interface Timing 11-1) Timing Parameters Power supply CLK Frequency Period HSYNC Display period Pulse width Back-porch Front-porch Hpw+Hbp Hsync-CLK Vsync-Hsync Period VSYNC DENB R,G,B Symbol VCC 1/tc tc Hp Hdp Hpw Hbp Hfp Hhc Hvh Vp Display period Vdp Pulse width Vpw Back-porch Vbp Front-porch Vfp Vpw+Vbp Horizontal T1 scanning period Horizontal T2 display period Vertical display T3 period Frame cycling T4 period CLK-DATA Dcd DATA-CLK Ddc Min. 3.0 10 0 - Typ. 3.3 32 31.25 33 1056 800 128 88 40 216 0 17.325 525 480 2 33 10 35 Max. 3.6 Tc-10 200 - Unit V MHz ns us tc tc tc tc tc tc ns tc ms Hp Hp Hp Hp Hp Hp 860 1056 1064 tc - 800 - tc - 480 - T1 490 525 590 T1 10 8 - - ns ns Remark The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:12 PM070WU1 11-2) The Timing Diagram A. The timing chart for DENB mode a) CLK data, relationship tc R05-R00 G05-G00 B05-B00 DENB b) DENB Timing B. The timing chart for sync mode a) CLK Hsync relation ship CLK Hhc HSYNC The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:13 PM070WU1 b) Hsync timing HSYNC Hpw Hp Hdp Hbp Hfp R,G,B Valid data c) Hsync,Vsync relation ship d) Vsync Timing Valid line The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:14 PM070WU1 12. Power on Sequence VCC Logic Signal Backlight ON OFF >10ms OFF >10ms 1. 0＜t1 20ms 2. 0＜t2 50ms 3. 0＜t3 1s 13. Optical Characteristics 13-1) Specification: Parameter Horizontal Viewing Angle Vertical Contrast Ratio Rise Response time Fall Brightness LED Life Time Luminance Uniformity White Chromaticity Cross Talk Symbol θ22.21 θ12 θ11 CR Tr Tf L U x y CTK Condition CR 10 θ=0° θ=0° θ=0°/φ=0 +25℃ θ=0° MIN. ±75 55 65 600 350 20000 70 0.27 0.30 - TYP. MAX. ±80 60 70 800 5 10 15 20 400 30000 75 0.31 0.35 0.34 0.38 3.5 Unit deg deg deg ms ms cd/㎡ hrs % % Ta=25 Remarks Note 13-1 Note 13-2 Note 13-3 Note 13-4 Note 13-5 Note 13-6 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:15 PM070WU1 Note 13-1: The definitions of viewing angles are as follow. Note 13-2: The definition of contrast ratio CR = Luminance when Testing point is White Luminance when Testing point is Black Note 13-3: Definition of Response Time Tr and Tf: White Black White 100% 90% Brightness 10% 0% Tr Tf Note 13-4: The “LED Life time “ is defined as the module brightness decrease to 50% original Brightness that the ambient temperature is 25 and ILED =176mA The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:16 PM070WU1 Note 13-5: The uniformity of LCD is defined as The Minimum Brightness of the 9 testing Points The Maximum Brightness of the 9 testing Points Luminance meter: BM-5A or BM-7 fast (TOPCON) Measurement distance: 500 mm +/- 50 mm Ambient illumination: < 1 Lux Measuring direction: Perpendicular to the surface of module The test pattern is white (Gray Level 63). U= 1/6 2/6 2/6 1/6 1/6 Note 13-6: Cross Talk (CTK) = 2/6 2/6 1/6 ⏐YA-YB⏐ ×100% YA YA: Brightness of Pattern A YB: Brightness of Pattern B Luminance meter: BM 5A or BM-7 fast (TOPCON) Measurement distance: 500 mm +/- 50 mm Ambient illumination: < 1 Lux Measuring direction: Perpendicular to the surface of module Pattern A Pattern B (Gray Level 31) (Gray Level 31, central black box exclusive) YA YB 1/3 1/3 1/3 1/3 1/3 1/3 Black : Measuring Point (A and B are at the same point.) (Gray Level 0) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:17 PM070WU1 14. Handling Cautions 14-1) Mounting of module a) Please power off the module when you connect the input/output connector. b) Polarizer which is made of soft material and susceptible to flaw must be handled carefully. c) Protective film (Laminator) is applied on surface to protect it against scratches and dirt. d) Please following the tear off direction as figure14-1 to remove the protective film as slowly as possible, so that electrostatic charge can be minimized. 14-2) Precautions in mounting a) When metal part of the TFT-LCD module (shielding lid and rear case) is soiled, wipe it with soft dry cloth. b) Wipe off water drops or finger grease immediately. Long contact with water may cause discoloration or spots. c) TFT-LCD module uses glass which breaks or cracks easily if dropped or bumped on hard surface. Please handle with care. d) Since CMOS LSI is used in the module. So take care of static electricity and earth yourself when handling. 14-3) Adjusting module a) Adjusting volumes on the rear face of the module have been set optimally before shipment. b) Therefore, do not change any adjusted values. If adjusted values are changed, the specifications described may not be satisfied. 14-4) Others a) Do not expose the module to direct sunlight or intensive ultraviolet rays for many hours. b) Store the module at a room temperature place. c) The voltage of beginning electric discharge may over the normal voltage because of leakage current from approach conductor by to draw lump read lead line around. d) If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel. Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes or feet. Wash it out immediately with soap. e) Observe all other precautionary requirements in handling general electronic components. f) Please adjust the voltage of common electrode as material of attachment by 1 module. Figure 14-1 the way to peel off protective film The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:18 PM070WU1 15. Reliability Test No 1 2 3 4 5 6 Test Item High Temperature Storage Test Low Temperature Storage Test High Temperature Operation Test Low Temperature Operation Test High Temperature & High Humidity Operation Test Thermal Cycling Test (non-operating) 7 Vibration Test (non-operating) 8 Shock Test (non-operating) 9 Electrostatic Discharge Test (Operating) Test Condition Ta = +85 , 240 hrs Ta = -40 , 240 hrs Ta = +80 , 240 hrs Ta = -30 , 240 hrs Ta = +60 , 90%RH, 240 hrs (No Condensation) -30 Æ+80 , 100 Cycles 30min 30min Frequency：10 ~ 55 HZ , Amplitude：1 mm Sweep time: 11 min Test Period: 6 Cycles for each direction of X, Y, Z 100G, 6ms Direction: ±X, ±Y, ±Z Cycle: 3 times C=150pF. R=330Ω. Contact=+8KV ; Air=+15KV 10times/point, 5 points/panel face Ta: ambient temperature Note: The protective film must be removed before temperature test. [Criteria] In the standard conditions, there is not display function NG issue occurred. (Including: line defect ,no image), All the cosmetic specification is judged before the reliability stress. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:19 PM070WU1 16. Packing Diagram The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:20