9HUVLRQ3.0 7(&+1,&$/ 63(&,),&$7,21 02'(/ 12 PD035VL1 &XVWRPHU¶V&RQILUPDWLRQ &XVWRPHU 3D035VL1 %\ 39,¶V&RQILUPDWLRQ &RQILUPHG %\ 3UHSDUHG%\ )25025(,1)250$7,21 $= ',63/$<6,1& &2/80%,$$/,629,(-2&$ +WWSZZZ$=',63/$<6FRP 'DWHNovember 23 7KLVWHFKQLFDOVSHFLILFDWLRQLVVXEMHFWWRFKDQJHZLWKRXWQRWLFH 7KH LQIRUPDWLRQ FRQWDLQHG KHUHLQ LV WKH H[FOXVLYH SURSHUW\ RI 3ULPH 9LHZ ,QWHUQDWLRQDO &R /WG DQG VKDOO QRW EH GLVWULEXWHGUHSURGXFHGRUGLVFORVHGLQZKROHRULQSDUWZLWKRXWSULRUZULWWHQSHUPLVVLRQRI3ULPH9LHZ ,QWHUQDWLRQDO&R /WG 3DJH PD035VL1 Revision History Rev. 0.1 ᓐؖᑞ Issued Date Oct.31 ,2006 Eng. Revised Preliminary 0.1ver 1.0 ᓐؖᑞ Feb,13,2007 2.0 ჱ༌ Nov.13,2007 Release version Modify Page 23: 16 Delete carton and change packing 3.0 ჱ༌ Nov.23,2007 Contents Modify Page23 12. Reliability Test Low Temperature Operation Test : -20к change to -30к The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:2 PD035VL1 TECHNICAL SPECIFICATION CONTENTS NO. ITEM PAGE - Cover 1 - Revision History 2 - Contents 3 1 Application 4 2 Features 4 3 Mechanical Specifications 4 4 Mechanical Drawing of TFT-LCD module 5 5 Input Terminals 7 6 Absolute Maximum Ratings 9 7 Electrical Characteristics 9 8 Pixel Arrangement 11 9 Display Color and Gray Scale Reference 12 10 Block Diagram 13 11 Interface Timing 14 12 Power On Sequence 17 13 18 14 Optical Characteristics Handling Cautions 22 15 Reliability Test 23 16 Packing Diagram 24 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:3 PD035VL1 1.Application This data sheet applies to a color TFT LCD module, PD035VL1 The module applies to OA product, GPS, which require high quality flat panel display. If you must use in high reliability environment can’t over reliability test condition. If you use PD035VL1, Prime View advises your system sides must use PVI-2002A(2005/8 new product change to PVI-2003A) which one generates signal to control PD035VL1 2. Features . Amorphous silicon TFT LCD panel with back-light unit . Pixel in stripe configuration . Thin and light weight . Display ColorsΚ262144 colors . Optimum Viewing DirectionΚ6 o’clock . LVDS transmission interface 3. Mechanical Specifications Parameter Screen Size Display Format Display Colors Active Area Pixel Pitch Pixel Configuration Back-light Outline Dimension Weight Surface treatment Display mode Gray scale inversion direction Specifications 3.5 (diagonal) 640ͪ(R, G, B)ͪ480 262,144 72.00 (H)ͪ52.56 (V) 0.1125 (H)ͪ0.1095 (V) Stripe Unit inch dot mm mm 6-LED 85.2 (W)Ø66.45(H)Ø8.45 (D) (Typ.) 78²5 AG Normally white mm g 6 o’clock [Note 13-2] The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:4 PD035VL1 4.Mechanical Drawing of TFT-LCD Module Outline Drawing : Front View (unit mm) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:5 PD035VL1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:6 PD035VL1 5.Input Terminals 5-1) TFT-LCD Panel Driving Connector type: DF19K-20P-1H(56)(HRS) Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Symbol Vcc Vcc GND GND INOINO+ GND IN1IN1+ GND IN2IN2+ GND CLKCLK+ GND NC NC GND GND Function +3.3V Power Supply +3.3V Power Supply Ground Ground LVDS receiver signal channel 0 LVDS receiver signal channel 0 Ground LVDS receiver signal channel 1 LVDS receiver signal channel 1 Ground LVDS receiver signal channel 2 LVDS receiver signal channel 2 Ground LVDS receiver signal clock LVDS receiver signal clock Ground No connection No connection Ground Ground Remark LVDS Interface Block Diagram T I N 12~ TI N 17 T I N 18 V sync T I N 19 DENB T I N 20 CLK IN IN0+ I N 1IN1+ I N 2IN2+ Signal Processor H sync I N 0- LVDS interface B0~B5 T I N 6~ T I N 1 1 D ata CLK- T CL K IN PLL T H C 63L V D M 63 A C ustom er system side C ontrol & data LCD Internal Circuit G0~G5 T I N 0~ T I N 5 TTL parallel to LVDS Graphic Controller Circuit R0~R5 CLK+ L C D co ntro ller PD 03 5V L 1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:7 PD035VL1 Recommended Transmitter (THC63LVDM63A Thine) to PD035VL1 interface Assignment: Input terminal of THC63LVDM63A Symbol TIN0 TIN1 TIN2 TIN3 TIN4 TIN5 TIN6 TIN7 TIN8 TIN9 TIN10 TIN11 TIN12 TIN13 TIN14 TIN15 TIN16 TIN17 TIN18 TIN19 TIN20 CLK in No. 44 45 47 48 1 3 4 6 7 9 10 12 13 15 16 18 19 20 22 23 25 26 Graphic controller output signal Symbol R0 R1 R2 R3 R4 R5 G0 G1 G2 G3 G4 G5 B0 B1 B2 B3 B4 B5 Hsync Vsync DENB CLK Function Red pixel data (LSB) Red pixel data Red pixel data Red pixel data Red pixel data Red pixel data(MSB) Green pixel data (LSB) Green pixel data Green pixel data Green pixel data Green pixel data Green pixel data(MSB) Blue pixel data(LSB) Blue pixel data Blue pixel data Blue pixel data Blue pixel data Blue pixel data(MSB) Horizontal Synchronous Signal Vertical Synchronous Signal Compound Synchronization signal Data sampling clock To PD035VL1 Output signal interface terminal symbol (Symbol) Tout0- No.5 : IN0- Tout0+ No.6 : IN0+ Tout1- No.8 : IN1- Tout1+ No.9 : IN1+ Tout2- No.11 : IN2- Tout2+ N0.12 : IN2+ TCLK outTCLK out+ No.14 : CLK No.15 : CLK+ DENB input signal. If customer wanted to off the DENB mode , you must keep the DENB always High or Low. ˋ˃˃ʳ̇˶ ˉˇ˃ʳ̇˶ ˗˘ˡ˕ (tc: the period of sampling clock) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:8 PD035VL1 6. Absolute Maximum Ratings : The followings are maximum values , which if exceeded, may cause faulty operation or damage to the unit. Parameters Supply Voltage MIN. -0.3 Symbol VCC MAX. +4.0 GND=0V, Ta=25ʚ Unit Remark V 7.Electrical Characteristics 7-1) Recommended Operating Conditions: Item Symbol Supply Voltage Vcc Current Dissipation Icc LVDS Differential input high threshold VTH LVDS Differential input low threshold VTL Vcom Voltage Vcom Min. 3.0 -100 - Typ. 3.3 455.4 2.6 Max. 3.6 496.8 100 - Unit V mA mV Ta = 25к Remark Note 7-1 V Note 7-1 : To test the current dissipation of VCC using the “color bars” testing pattern shown as below 1 2 3 4 5 6 7 8 1. 2. 3. 4. 5. 6. 7. 8. White Yellow Cyan Green Magenta Red Blue Black Idd current dissipation testing pattern The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:9 PD035VL1 7-2) Recommended driving condition for LED backlight GND = 0 VΔ Ta = 25к Parameter Symbol Min TYP VLED - - (11.4) V Remark Note 7-2 - 20 - mA Note 7-3 - - 456 mW Note 7-4 Supply voltage of LED backlight Supply current of LED backlight Backlight Power Consumption ILED1 ILED2 PLED MAX Unit Note 7-2 : ILED= 20mA,constant current Note 7-3 : The LED driving condition is defined for each LED module. (3 LED Serial) Input current = 20mA * 2. Note 7-4 : PLED = VLED * ILED1 + VLED * ILED2 . 7-3) Power Consumption Parameters Total Power Consumption Symbol - Typ. 1.37 Max. 1.65 Unit W Remark The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:10 PD035VL1 8. Pixel Arrangement The LCD module pixel arrangement is the stripe. R G B R G B R G B 1 st Line RGB R G B R G B 2 nd Line RGB R G B 3 rd Line RGB 1 st Pixel 640 th Pixel 1 Pixel = R G B RGB 478 th Line RGBRGB RGB 479 th Line RGBRGBRGB 480 th Line RGB RGB The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:11 PD035VL1 9. Display Color and Gray Scale Reference Color Input Color Data Green Red Blue R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0 Basic Colors Red Green Blue Black Red (63) Green (63) Blue (63) Cyan Magenta Yellow White Red (00) Red (01) Red (02) Darker ʆ Brighter Red (61) Red (62) Red (63) Green (00) Green (01) Green (02) Darker ʆ Brighter Green (61) Green (62) Green (63) Blue (00) Blue (01) Blue (02) Darker ʆ Brighter Blue (61) Blue (62) Blue (63) 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 0 1 1 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 0 1 1 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:12 PD035VL1 10. Block Diagram 10-1) TFT-module Block Diagram ˨̆˸̅ ̆˼˺́˴˿ʳ ˼́̃̈̇ ʾˆˁˆ˩ ˣ˖˕˔ ˟˩˗˦ʳ˦˼˺́˴˿ ˧˼̀˼́˺ʳ˖̂́̇̅̂˿˿˸̅ ʻ˙˦ˌ˃˔˕˃ˌ˄˔˖ʼ ˩˼˷˸̂ ˖̂́̇̅̂˿ ˩˗˗˄ ˗˖ˀ˗˖ʳ ˖̂́̉˸̅̇˸̅ ˚˴̀̀˴ ˚˸́˸̅˴̇̂̅ ˩˶̂̀ ˚˸́˸̅˴̇̂̅ ˩˚˚ʳ˂ʳ˩˘˘ ˩˗˗˅ ˚˴̀̀˴ ˙ˣ˖ ˦̂̈̅˶˸ ˗̅˼̉˸̅ ˜˖ ˆˁˈʵ˩˚˔ ˧˙˧ˀ˟˖˗ʳˣ˴́˸˿ ˩˶̂̀ ˚˴̇˸ʳ˗̅˼̉˸̅ʳ˜˖ The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:13 PD035VL1 11. Interface Timing 11.1) Timing Parameters Symbol Min. Typ. Max. Unit Power supply VCC 3.0 3.3 3.6 V CLK 1/tc - 25 - MHz tc - 40 - ns Hp - 32 - us - 800 - tc Frequency HSYNC Period Display period Hdp - 640 - tc Pulse width Hpw - 96 - tc Back-porch Hbp - 46 - tc Front-porch Hfp - 18 - tc - 142 - tc Hpw+Hbp Hsync-CLK Hhc 10 - Tc-10 ns Vsync-Hsync Hvh 0 0 200 tc Vp - 16.8 - ms - 525 - Hp VSYNC Period Display period Vdp - 480 - Hp Pulse width Vpw - 2 - Hp Back-porch Vbp - 33 - Hp Front-porch Vfp - 10 - Hp - 35 - Hp Vpw+Vbp DENB Horizontal scanning period T1 - 800 - tc Horizontal display period T2 - 640 - tc T3 - 480 - T1 Frame cycling period T4 520 525 800 T1 CLK-DATA Dcd 10 - - ns DATA-CLK Ddc 8 - - ns Vertical display period R,G,B Remark The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:14 PD035VL1 11.2) The Timing Diagram a. Input signal range a.1 tc Dcd R05-R00 G05-G00 B05-B00 Ddc DENB a.2 HSYNC timing Hp Hpw HSYNC Hdp Hbp Hfp R,G,B Vaild data a.3 CLK,HSYNC relationship CLK Hhc HSYNC The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:15 PD035VL1 a.4 HSYNC, VSYNC relationship a.5 VSYNC timing DENB a.6 DENB timing Line 1 Line 480 Line 1 Line 2 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:16 PD035VL1 12. Power On Sequence VCC 3.0V 3.0V Logic Signal 0.3V t1 Backlight t2 t3 OFF OFF ON 10ms 10ms 1. 0Іt1Љ20ms 2. 0Іt2Љ50ms 3. 0Іt3Љ1s The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:17 PD035VL1 13. Optical Characteristics 13-1) Specification: Parameter Horizontal Viewing Angle Vertical Contrast Ratio Rise Fall Response time Brightness Uniformity Cross Talk White Chromaticity LED Life Time Symbol Condition Ӱ21, Ӱ22 Ӱ12 (to12o’clock) CRЇ10 Ӱ11 (to 6 o’clock) CR Tr Ӱ=0̓ Tf Ӱ=0̓ L Ӱ=0̓ U Ӱ=0̓ x y Ta=25к MIN. TYP. MAX. ̈́45 ̈́50 - Unit deg Ta=25к Remarks 10 15 - deg 30 35 - deg 30 50 3.5 0.34 0.36 - ms ms Note 13-4 cd/ф Note 13-1 Note 13-5 Note 13-6 200 400 15 25 200 250 70 75 0.28 0.31 0.30 0.330 20000 30000 % % hrs Note 13-2 Note 13-3 Note 13-1 Note 13-7 All the optical measurement shall be executed 30 minute after backlight being turn-on. The optical characteristics shall be measured in dark room (ambient illumination on panel surface less than 1 Lux). The measuring configuration shows as following figure. Photometer (TOPCON BM-5A or BM-7 fast) 500 mm +/- 50 mm Field = 1° TFT-LCD module Optical characteristics measuring configuration The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:18 PD035VL1 Note 13-1: 1.Topcon BM-5A or BM-7 fast luminance meter 1̓ field of view is used in the testing (after 30 minute operation). Note 13-2: The definitions of viewing angles are as follow Note 13-3: Definition of Response Time Tr and Tf: White Black White 100% 90% Brightness 10% 0% Tr Tf The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:19 PD035VL1 Note 13-4: The definition of contrast ratio ˖˥ = ˟̈̀˼́˴́˶˸ʳ˴̇ʳ˺̅˴̌ʳ˿˸̉˸˿ʳˉˆ ˟̈̀˼́˴́˶˸ʳ˴̇ʳ˺̅˴̌ʳ˿˸̉˸˿ʳ˃ Note 13-5 : The uniformity of LCD is defined as The Minimum Brightness of the 9 testing Points U= The Maximum Brightness of the 9 testing Points Luminance meter : BM-5A or BM-7 fast (TOPCON) Measurement distance : 500 mm +/- 50 mm Ambient illumination : < 1 Lux Measuring direction : Perpendicular to the surface of module The test pattern is white (Gray Level 63). 1 /6 2 /6 2 /6 1 /6 1 /6 2 /6 ⏐YA-YB⏐ YA YA : Brightness of Pattern A YB : Brightness of Pattern B Note 13-6 : Cross Talk (CTK) = 2 /6 1 /6 ͪ100% The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:20 PD035VL1 Pattern A Pattern B (Gray Level 31) (Gray Level 31, central black box exclusive) YA YB 1/3 1/3 1/3 1/3 1/3 1/3 Black : Testing Point (A and B are at the same point.) (Gray Level 0) Note 13-7: The “LED Life time “ is defined as the module brightness decrease to 50% original Brightness that the ambient temperature is 25к and ILED =20mA. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:21 PD035VL1 14. Handling Cautions 14-1) Mounting of module a) Please power off the module when you connect the input/output connector. b) Polarizer which is made of soft material and susceptible to flaw must be handled carefully. c) Protective film (Laminator) is applied on surface to protect it against scratches and dirt’s. It is recommended to peel off the laminator before use and taking care of static electricity. 14-2) Precautions in mounting a) When metal part of the TFT-LCD module (shielding lid and rear case) is soiled, wipe it with soft dry cloth. b) Wipe off water drops or finger grease immediately. Long contact with water may cause discoloration or spots. c) TFT-LCD module uses glass which breaks or cracks easily if dropped or bumped on hard surface. Please handle with care. d) Since CMOS LSI is used in the module. So take care of static electricity and earth yourself when handling. 14-3) Adjusting module a) Adjusting volumes on the rear face of the module have been set optimally before shipment. b) Therefore, do not change any adjusted values. If adjusted values are changed, the specifications described may not be satisfied. 14-4) Others a) Do not expose the module to direct sunlight or intensive ultraviolet rays for many hours. b) Store the module at a room temperature place. c) The voltage of beginning electric discharge may over the normal voltage because of leakage current from approach conductor by to draw lump read lead line around. d) If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel. Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes or feet. Wash it out immediately with soap. e) Observe all other precautionary requirements in handling general electronic components. f) Please adjust the voltage of common electrode as material of attachment by 1 module. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:22 PD035VL1 15. Reliability Test No 1 Test Item High Temperature Storage Test Test Condition Ta = +80 к, 240 hrs 2 3 4 Low Temperature Storage Test Ta = -30 к, 240 hrs High Temperature Operation Test Low Temperature Operation Test High Temperature & High Humidity Operation Test Ta = +70 к, 240 hrs Ta = -30 к, 240 hrs 5 6 Thermal Cycling Test (non-operating) 7 Shock Test (non-operating) 8 Ta = +60 к, 90%RH, 240 hrs -25к Ш +70к, 200 Cycles 30 min 30 min 100G, 6ms Vibration Test Direction: ̈́X, ̈́Y, ̈́Z Cycle: 3 times FrequencyΚ10 ~ 55 HZ AmplitudeΚ1 mm Sweep time: 11 mins (non-operating) Test Period: 6 Cycles for each direction of X, Y, Z ±8KV,10times/point , 5 points/panel face Air mode: 150pF, 330ΩAir : ±15KV Contact mode: 9 Electrostatic Discharge Test (non-operating) Ta: ambient temperature Note: The protective film must be removed before temperature test. [Criteria] In the standard conditions, there is not display function NG issue occurred. (including : line defect ,no image), All the cosmetic specification is judged before the reliability stress. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:23 PD035VL1 16. Packing Diagram The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:24 PD035VL1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:25