P-511-509(V:1) PD104SLF Version : 1.0 TECHNICAL MODEL SPECIFICATION NO : PD104SLF The content of this information is subject to be changed without notice. Please contact PVI or its agent for further information. Customer’s Confirmation Customer Date By FOR MORE INFORMATION: AZ DISPLAYS, INC. 75 COLUMBIA, ALISO VIEJO, CA 92656 Http://www.AZDISPLAYS.com PVI’s Confirmation Confirmed By Prepared By The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Page:1 Ltd. P-511-509(V:1) PD104SLF Revision History Rev. Issued Date Eng. 1.0 Jun 10 , 2008 ޕᗩᎮ Revised Content New The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:2 P-511-509(V:1) PD104SLF TECHNICAL SPECIFICATION CONTENTS NO. ITEM PAGE - Cover 1 - Revision History 2 - Contents 3 1 Application 4 2 Features 4 3 Mechanical Specifications 4 4 Mechanical Drawing of TFT-LCD module 5 5 Input Terminals 7 6 Absolute Maximum Ratings 9 7 Electrical Characteristics 9 8 Power On Sequence 17 9 Optical Characteristics 18 10 Handling Cautions 22 11 Reliability Test 23 12 Block Diagram 24 13 Packing 25 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:3 P-511-509(V:1) PD104SLF 1. Application This data sheet applies to a color TFT LCD module, PD104SLF. PD104SLF module applies to OA product, car TV (must use Analog to Digital drive board), which require high quality flat panel display. If you must use in high reliability environment can’t over reliability test condition Prime View assume no responsibility for any damage resulting from the use of the device which dose not comply with the instructions and the precautions in these specification sheet. 2. Features . Amorphous silicon TFT LCD panel with back-light unit . Pixel in stripe configuration . Slim and compact, designed for O/A application . Display ColorsΚ262,144 colors . +3.3V DC supply voltage for TFT LCD panel driving . Backlight driving DC/AC inverter not included in this module . Wide Viewing Angle 3. Mechanical Specifications Parameter Screen Size Display Format Display Colors Active Area Pixel Pitch Pixel Configuration Outline Dimension Weight Back-light Surface treatment Display mode Specifications 10.4 (diagonal) 800ͪ(R, G, B)ͪ600 262,144 211.2(H)ͪ158.4 (V) 0.264 (H)ͪ0.264 (V) Stripe 236.0 (w)Ø174.3(H)Ø5.6(typ.) (D) 330±15 39-LED Anti-glare and EWV Normally white Gray scale inversion direction 6 o’clock [ Note 9-1 ] Unit inch dot mm mm mm g The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:4 P-511-509(V:1) PD104SLF 4. Mechanical Drawing of TFT-LCD Module The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:5 P-511-509(V:1) PD104SLF The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:6 P-511-509(V:1) PD104SLF 5. Input Terminals 5-1) TFT-LCD Panel Driving Connector type: HIROSE DF19K-20P-1H (56) Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Symbol VDD VDD GND GND INOINO+ GND IN1IN1+ GND IN2IN2+ GND CLKCLK+ GND NC NC GND GND Function +3.3V Power Supply +3.3V Power Supply Ground Ground LVDS receiver signal channel 0 LVDS receiver signal channel 0 Ground LVDS receiver signal channel 1 LVDS receiver signal channel 1 Ground LVDS receiver signal channel 2 LVDS receiver signal channel 2 Ground LVDS receiver signal clock LVDS receiver signal clock Ground No connection No connection Ground Ground Remark The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:7 P-511-509(V:1) PD104SLF Recommended Transmitter (THC63LVDM63A Thine) to PD104SLF interface Assignment: To PD104SLF Input terminal of Output signal Graphic controller output signal interface THC63LVDM63A symbol terminal(Symbol) Symbol No. Symbol Function TIN0 44 R0 Red pixel data (LSB) TIN1 45 R1 Red pixel data TIN2 47 R2 Red pixel data Tout0No.5 : IN0TIN3 48 R3 Red pixel data TIN4 1 R4 Red pixel data Tout0+ No.6 : IN0+ TIN5 3 R5 Red pixel data(MSB) TIN6 4 G0 Green pixel data (LSB) TIN7 6 G1 Green pixel data TIN8 7 G2 Green pixel data TIN9 9 G3 Green pixel data Tout1No.7 : IN1TIN10 10 G4 Green pixel data TIN11 12 G5 Green pixel data(MSB) Tout1+ No.8 : IN1+ TIN12 13 B0 Blue pixel data(LSB) TIN13 15 B1 Blue pixel data TIN14 16 B2 Blue pixel data TIN15 18 B3 Blue pixel data TIN16 19 B4 Blue pixel data Tout2No.9 : IN2TIN17 20 B5 Blue pixel data(MSB) TIN18 22 HSYNC Horizontal sync signal Tout2+ N0.10 : IN2+ TIN19 23 VSYNC Vertical sync signal TIN20 25 DENB Compound Synchronization signal No.11 : CLK TCLK outTCLK in 26 CLK Data sampling clock TCLK out+ No.12 : CLK + LVDS Interface Block Diagram TI N 12~ T IN 17 TI N 18 V sync TI N 19 DENB TI N 20 CLK IN IN 0 + I N 1IN 1 + I N 2IN 2 + D ata Signal Processor H sync I N 0- LVDS interface B0~B5 TI N 6~ T I N 1 1 C ontrol & data CLK- TCL K IN PLL T H C 63L V D M 6 3A C ustom er system side LCD Internal Circuit G0~G5 TI N 0~ T I N 5 TTL parallel to LVDS Graphic Controller Circuit R0~R5 CLK+ L C D controller PD 1 04S L F m odule side The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:8 P-511-509(V:1) PD104SLF 5-2) Backlight driving Connector type : “BHSR-02VS-1” of Japan Solderless Terminal MFG Co. LTD Pin No Symbol Description Remark 1 + Input terminal (h) Wire Color : Red 2 - Input terminal (j) Wire Color : Black 6. Absolute Maximum Ratings: Parameters Supply Voltage Input Signals Voltage Note 6-1: LVDS signal. Symbol VDD VIN MIN. -0.3 -0.3 GND=0V, Ta=25ʚ Unit Remark V V Note 6-1 MAX. +4.0 VDD+0.3 7. Electrical Characteristics 7-1) Recommended Operating Conditions: Item Symbol Supply Voltage VDD Current Dissipation IDD LVDS Differential input high threshold VTH LVDS Differential input low threshold VTL Min. 3.0 -100 GND = 0VΔTa = 25к Unit Remark Max. 3.6 V 380 mA Note 7-1 Note 7-2 100 mV - Typ. 3.3 190 - Note 7-1 : To test the current dissipation of VDD, using the “color bars” testing pattern shown as below 1 2 3 4 5 6 7 8 1. 2. 3. 4. 5. 6. 7. 8. White Yellow Cyan Green Magenta Red Blue Black Idd current dissipation testing pattern Note 7-2 : Please refers to THC63LVDF63A specification by THINE Corporation. This LCD module conforms to LVDS standard. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:9 P-511-509(V:1) PD104SLF 7-2) Recommended Driving Condition for Back Light Parameter Ta = 25к Remark Note 7-1 Symbol Min TYP Supply voltage of LED backlight VLED - - (11) V Supply current of LED backlight ILED - 20 - mA Note 7-2 Backlight Power Consumption PLED - - 2.86 W Note 7-1 / Note 7-3 MAX Unit Note 7-1 : ILED = 20mA (Constant Current). Note 7-2 : The LED driving condition is defined for each LED module. (3 LED Serial) Input current = 20mA * 13 = 260mA Note 7-3 : PLED = VLED-1 * ILED-1 + VLED-2* ILED-2 ….. + VLED-12 * ILED-12+VLED-13 * ILED-13 VLED-1 VLED-2 Cathode Anode VLED-12 VLED-13 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:10 P-511-509(V:1) PD104SLF 7-3) Input signal timing : DENB pin have high priority than SYNC mode (HSVC+VSYNC). When IC only use SYNC pin, DENB pin have to connect to ground. (A)Timing Specifications (DENB Mode): Item Symbol Frame Cycling Period t1 Vertical Display Period t2 Horizontal Scanning Time t3 Horizontal Display Period Min. Typ. Max. Unit Remark 604 X t3 628X t3 800 X t3 - 14 16.58 20 ms 600 X t3 600 X t3 600 X t3 - 920 X t5 1056 X t5 1064 X t5 - 24 26.4 33 Ӵs t4 800 X t5 800 X t5 800 X t5 - Clock Cycle t5 20 25.0 31.25 ns Clock High Level Time t6 9.0 - - ns Clock Low Level Time t7 9.0 - - ns Hold time t8 4.0 - - ns Set-up time t9 5.0 - - ns (B). Timing Specifications (SYNC Mode) Item HSYNC Period Symbol Min. Typ. Max. Unit Hp 24 26.4 33 us 920 1056 1064 tc Display period Hdp 800 800 800 tc Pulse width Hpw 12 128 202 tc Back-porch Hbp 12 86 202 tc Front-porch Hfp 42 42 42 tc 214 214 214 tc Hpw+Hbp Hsync-CLK Hhc 10 - Tc-10 ns Vsync-Hsync Hvh 0 0 200 tc VSYNC Period (Frame cycling period) Vp 14 16.58 20 ms 604 628 800 Hp Display period Vdp 600 600 600 Hp Pulse width Vpw 2 4 27 Hp Back-porch Vbp 0 23 25 Hp Front-porch Vfp 1 1 1 Hp 27 27 27 Hp Vpw+Vbp Remark Note 1 Note 1 : Frame cycling period is optimum in 16.58ms.(60HZ) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:11 P-511-509(V:1) PD104SLF ©Timing Chart: t1 t2 CLK t3 t3 DENB R5~R0 G5~G0 B5~B0 X,1 X,2 X,3 X,4 X,Y X,598 X,599 X,600 tc t3 t4 CLK DENB 797,Y 799,Y R5~R0 G5~G0 B5~B0 1,Y 2,Y 3,Y 4,Y 5,Y 6,Y 7,Y X,Y 798,Y 800,Y The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:12 P-511-509(V:1) PD104SLF Hp ʳʳ˛˦ˬˡ˖ Hpw Hdp Hbp Hfp R,G,B valid data CLK Hhc HSYNC HSYNC Hvh VSYNC The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:13 P-511-509(V:1) PD104SLF Vp Vpw VSYNC Vdp Vbp Vfp R,G,B valid data t5 t6 t7 ˩˜˛ʻˠ˼́ʼˍ˃ˁˋ˩˶˶ CLK ˩˜˟ʻˠ˴̋ʼˍ˃ˁ˅˩˶˶ t8 HYSNC VSYNC DENB R5-R0 G5-G0 B5-B0 t9 ˩˜˛ʻˠ˼́ʼˍ˃ˁˋ˩˶˶ VALID DATA a ˜́̃̈̇ʳ˦˼˺́˴˿ʳ ˖˸́̇˸̅˟˸̉˸˿ˍ ˃ˁˈ˩˶˶ ˩˜˟ʻˠ˴̋ʼˍ˃ˁ˅˩˶˶ b CLK ˃ˁˈ˩˶˶ Duty ( a ,b ) : 50 +10% The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:14 P-511-509(V:1) PD104SLF 7-4) Display Color and Gray Scale Reference Color Input Color Data Green Red Blue R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0 Basic Colors Red Green Blue Black Red (63) Green (63) Blue (63) Cyan Magenta Yellow White Red (00) Red (01) Red (02) Darker ʆ Brighter Red (61) Red (62) Red (63) Green (00) Green (01) Green (02) Darker ʆ Brighter Green (61) Green (62) Green (63) Blue (00) Blue (01) Blue (02) Darker ʆ Brighter Blue (61) Blue (62) Blue (63) 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 0 1 1 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 0 1 1 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:15 P-511-509(V:1) PD104SLF 7-5) Pixel Arrangement The LCD module pixel arrangement is the stripe. R G B R G B R G B 1 st Line RGB R G B R G B 2 nd Line RGB R G B 3 rd Line RGB 1 st Pixel 800 th Pixel 1 Pixel = R G B RGB 598 th Line RGBRGB RGB 599 th Line RGBRGBRGB 600 th Line RGB RGB The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:16 P-511-509(V:1) PD104SLF 8. Power On Sequence 3.0 V 0 s< t <35 m s 0 s< t <35 m s 3.0 V ˩˗˗ Signal ˅̇ ˄ ˃ˏ̇ ˄ B acklight 1. The supply voltage for input signals should be same as VDD. 2. When the power is off , please keep whole signals (Hsync,Vsync,DENB,CLK, Data) low level or high impedance. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:17 P-511-509(V:1) PD104SLF 9. Optical Characteristics 9-1) Specification: Parameter Symbol Ӱ Horizontal Ӱ(to 12 Viewing Angle o’clock) Vertical Ӱ(to 6 o’clock) Contrast Ratio Response time Rise Fall Brightness Luminance Uniformity White Chromaticity Cross Talk Ratio LED Life Time CR Tr Tf L U x y CTK Condition CR≥10 Optimum direction Ӱ=0̓ ӽ=0̓ Ӱ=0°/ӽ=0̓ Ta = +25к Unit Remarks deg MIN. ̈́65 TYP. ̈́70 MAX. - 45 50 - deg 55 60 - deg 200 400 - - 300 70 0.28 0.31 20000 15 25 400 80 0.32 0.35 30000 50 50 0.36 0.39 3.5 - ms ms cd/ф % % hr Note 9-1 Note 9-2 Note 9-3 Note 9-4 Note 9-5 Note 9-6 Note 9-7 All the optical measurement shall be executed 30 minutes after backlight being turn-on. The optical characteristics shall be measured in dark room (ambient illumination on panel surface less than 1 Lux). The measuring configuration shows as following figure. Photometer (TOPCON BM-5A or BM-7 fast) 500 mm +/- 50 mm Field = 1° TFT-LCD module DC/AC Inverter Optical characteristics measuring configuration The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:18 P-511-509(V:1) PD104SLF Note 9-1ΚThe definitions of viewing angles are as follows. LED connector θ 12 o’clock 3 o’clock 9 o’clock 6 o’clock φ Note 9-2 : The definition of contrast ratio ˖˥ = ˟̈̀˼́˴́˶˸ʳ˴̇ʳ˺̅˴̌ʳ˿˸̉˸˿ʳˉˆ ˟̈̀˼́˴́˶˸ʳ˴̇ʳ˺̅˴̌ʳ˿˸̉˸˿ʳ˃ Note 9-3: Definition of Response Time Tr and Tf: White Black White 100% 90% Brightness 10% 0% Tr Tf Note 9-4 : Topcon BM-5A or BM-7 fast luminance meter 1̓field of view is used in the testing. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:19 P-511-509(V:1) PD104SLF Note 9-5: The uniformity of LCD is defined as U= The Minimum Brightness of the 9 testing Points The Maximum Brightness of the 9 testing Points Luminance meter : BM-5A or BM-7 fast(TOPCON) Measurement distance : 500 mm +/- 50 mm Ambient illumination : < 1 Lux Measuring direction : Perpendicular to the surface of module The test pattern is white (Gray Level 63). 1/6 2/6 2/6 1/6 1/6 Note 9-6: Cross Talk (CTK) = 2/6 ⏐YA-YB⏐ YA 2/6 1/6 ͪ100% YA: Brightness of Pattern A YB: Brightness of Pattern B Luminance meter : BM 5A (TOPCON) Measurement distance : 500 mm +/- 50 mm Ambient illumination : < 1 Lux Measuring direction : Perpendicular to the surface of module The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:20 P-511-509(V:1) PD104SLF Pattern A Pattern B (Gray Level 31) (Gray Level 31, central black box exclusive) YA YB 1/3 1/3 1/3 1/3 1/3 1/3 Black : Measuring Point (A and B are at the same point.) (Gray Level 0) Note 9-7: The “LED Life time “ is defined as the module brightness decrease to 50% original Brightness that the ambient temperature is 25к and ILED =260mA. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:21 P-511-509(V:1) PD104SLF 10. Handling Cautions 10-1) Mounting of module a) Please power off the module when you connect the input/output connector. b) Polarizer which is made of soft material and susceptible to flaw must be handled carefully. c) Protective film (Laminator) is applied on surface to protect it against scratches and dirt. d) Please following the tear off direction as figure 10-1 to remove the protective film as slowly as possible, so that electrostatic charge can be minimized. 10-2) Precautions in mounting a) When metal part of the TFT-LCD module (shielding lid and rear case) is soiled, wipe it with soft dry cloth. b) Wipe off water drops or finger grease immediately. Long contact with water may cause discoloration or spots. c) TFT-LCD module uses glass which breaks or cracks easily if dropped or bumped on hard surface. Please handle with care. d) Since CMOS LSI is used in the module. So take care of static electricity and earth yourself when handling. 10-3) Adjusting module a) Adjusting volumes on the rear face of the module have been set optimally before shipment. b) Therefore, do not change any adjusted values. If adjusted values are changed, the specifications described may not be satisfied. 10-4) Polarizer mark The polarizer mark is to describe the direction of wide view angle film how to mach up with the rubbing direction. 10-5) Others a) Do not expose the module to direct sunlight or intensive ultraviolet rays for many hours. b) Store the module at a room temperature place. c) The voltage of beginning electric discharge may over the normal voltage because of leakage current from approach conductor by to draw lump read lead line around. d) If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel. Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes or feet. Wash it out immediately with soap. e) Observe all other precautionary requirements in handling general electronic components. f) Please adjust the voltage of common electrode as material of attachment by 1 module. Figure 10-1 the way to peel off protective film The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:22 P-511-509(V:1) PD104SLF 11. Reliability Test No Test Item Test 1 High Temperature Storage Test Ta = +70к, 240 hrs 2 Low Temperature Storage Test Ta = -20к, 240 hrs 3 High Temperature Operation Test Ta =+70к, 240 hrs 4 Low Temperature Operation Test 5 6 7 8 9 Condition Remark Ta = -20к, 240 hrs High Temperature & High Humidity Ta = +50к, 80%RH, 240 hrs Operation Test (No Condensation) Thermal Cycling Test 0к+60к, 100 Cycles (non-operating) Vibration Test 1Hr 1Hr FrequencyΚ10 ~ 57 HZ , AmplitudeΚ0.15 mm,58~500Hz, 1G Sweep time: 11 min (non-operating) Test Period: 3 hrs Shock Test (1 hr for each direction of X, Y, Z) 80G, 6ms, X,Y, Z (non-operating) Electron Static Discharge 1 times for each direction C=150pF,R=330Ө Contact=±8KV Air=±15KV 10 times/terminal Ta: ambient temperature Note: The protective film must be removed before temperature test. [Criteria] In the standard conditions, there is not display function NG issue occurred. (including : line defect ,no image). All the cosmetic specification is judged before the reliability stress. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:23 P-511-509(V:1) PD104SLF 12. Block Diagram VL1 Back-light( LED 1) VL2 1 IN0- 2 3 IN0+ IN1- IN2+ CLK- Gate Driver Control &data LCD Internal Circuit LVDS IN2- Data Signal Processor IN1+ TFT-LCD Display Area 598 599 CLK+ 600 12 3 4 LCD controller VDD Power Module 2400 Source Driver The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:24 P-511-509(V:1) PD104SLF 13. Packing The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:25