P-511-528(V:1) P D040QT 2 V ers ion : 1.0 T E C HNIC AL S P E C IF IC AT ION MODE L NO : P D040QT 2 T he content of this information is s ubject to be changed without notice. P leas e contact P V I or its agent for further information. C us tomer•s C onfirmation C us tomer Date By P V I•s C onfirmation FOR MORE INFORMATION: AZ DISPLAYS, INC. 75 COLUMBIA, ALISO VIEJO, CA 92656 Http://www.AZDISPLAYS.com Confirmed B y P repared B y T he information contained herein is the exclus ive property of P rime V iew International C o., Ltd. and s hall not be dis tributed, reproduced, or dis clos ed in whole or in part without prior written permis s ion of P rime V iew International C o., Ltd. P AG E :1 P-511-528(V:1) PD040QT2 Revision History Rev. 1.0 Issued Date June, 4, 2008 Revised New Contents The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:2 P-511-528(V:1) PD040QT2 TECHNICAL SPECIFICATION CONTENTS NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ITEM Cover Revision History Contents Application Features Mechanical Specifications Mechanical Drawing of TFT-LCD module Input / Output Terminals Pixel Arrangement Absolute Maximum Ratings Electrical Characteristics Display Color and Gray Scale Reference Interface Timing Power On Sequence Optical Characteristics Handling Cautions Reliability Test Block Diagram Packing PAGE 1 2 3 4 4 4 5 6 7 7 8 9 10 13 13 16 17 18 19 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:3 P-511-528(V:1) PD040QT2 1. Application This data sheet applies to a color TFT LCD module, PD040QT2.This module applies to OA product(must use Analog to Digital driving board), which requires high quality flat panel display. If you must use in severe reliability environment, please don’t extend over PVI’s reliability test conditions. 2. Features . Amorphous silicon TFT LCD panel with LED back-light unit . Pixel in stripe configuration . Slim and compact, designed for O/A application . TTL transmission interface 3. Mechanical Specifications Parameter Screen Size Display Format Active Area Pixel Pitch Pixel Configuration Display Colors Surface Treatment Back-light Outline Dimension Weight Display mode Gray scale inversion direction Specifications 4 (diagonal) 320ͪ(RGB)ͪ240 81.12 (H)ͪ60.84 (V) 0.2535(H)ͪ0.2535 (V) Stripe 262,144 Anti-Glare +EWV 8-LEDs 93.00(W)Ø74.10 (H)Ø8.30 (D)(typ.) 78²5 Normally white 6 (ref to Note 12-1 ) Unit inch dot mm mm mm g o’clock The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:4 P-511-528(V:1) PD040QT2 4. Mechanical Drawing of TFT-LCD Module The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:5 P-511-528(V:1) PD040QT2 5. Input / Output Terminals 5-1) TFT-LCD Panel Driving Connector type: ELCO 08-6210-033-340-800A+ , PIN No 33 pins, pitch=0.5mm Pin No Symbol 1 GND 2 CK 3 Hsync 4 Vsync 5 GND 6 R0 7 R1 8 R2 9 R3 10 R4 11 R5 12 GND 13 G0 14 G1 15 G2 16 G3 17 G4 18 G5 19 GND 20 B0 21 B1 22 B2 23 B3 24 B4 25 B5 26 GND 27 DENB 28 VCC 29 VCC I/O I I I I I I I I I I I I I I I I I I I I I - 30 R/L I 31 U/D I 32 33 LED_A LED_C I I Description GND Clock signal for sampling each data signal Horizontal synchronous signal(negative) Vertical synchronous signal(negative) GND RED data signal(LSB) RED data signal RED data signal RED data signal RED data signal RED data signal(MSB) GND GREEN data signal(LSB) GREEN data signal GREEN data signal GREEN data signal GREEN data signal GREEN data signal(MSB) GND Blue data signal(LSB) Blue data signal Blue data signal Blue data signal Blue data signal Blue data signal(MSB) GND Signal to settle the horizontal display position(positive) +3.3V power supply +3.3V power supply Horizontal display mode select signal LΚNormal ,HΚLeft /Right reverse mode Vertical display mode select signal LΚNormal ,H :Up/Down reverse mode LED Power (Anode) LED Power (Cathode) Remark Note5-1 Note5-2 Note5-3 Note5-1ΚThe horizontal display start timing is settled in accordance with rising of DENB signal. In case ENAB is fixed ”Low”, the horizontal start timing is determined as described in 10-2. Don`t keep DENB ”High” during operation. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:6 P-511-528(V:1) PD040QT2 Note 5-2 , 5-3 : The definitions of U/D & R/L U/D( PIN 31)= Low R/L( PIN30)= Low U/D( PIN 31)= High R/L ( PIN30)= High 6. Pixel Arrangement R G B R G B R G B 1 st Line RGB R G B R G B 2 nd Line RGB R G B 3 rd Line RGB 1 st Pixel 320th pixel 1 Pixel = R G B RGB 238 th Line RGBRGB RGB 239 thLine RGBRGBRGB RGB 240 th Line RGB 7. Absolute Maximum Ratings: Parameters Supply Voltage Input Signals Voltage Symbol VCC VIN MIN 0 -0.3 MAX. 3.6 4 GND=0V, Ta=25к Unit Remark V V The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:7 P-511-528(V:1) PD040QT2 8. Electrical Characteristics 8-1) Recommended Operating Conditions: Item GND=0V, Ta=25к Symbol VCC ICC PCC VIH VIL Vcom Supply Voltage Current Dissipation Total power consumption High Level Digital input voltage Low Level Vcom Voltage Min. 3.0 150 0.7Vcc 0 - Typ. 3.3 50 165 4 Max. 3.6 180 0.3Vcc Vcc - Unit V mA mW Remark Note 8-1 V Note 8-1 : To test the current dissipation of VCC, using the “color bars” testing pattern shown as below. 1 2 3 4 5 6 7 8 1. 2. 3. 4. 5. 6. 7. 8. White Yellow Cyan Green Magenta Red Blue Black IDD current dissipation testing pattern 7-2) Recommended Driving Condition for Back Light Ta=25к Parameter Symbol Min. Typ. Max. Unit Supply voltage of LED backlight VLED (14) V Supply current of LED backlight ILED 20 mA Backlight Power Consumption PLED 560 mW Note 7-2 : ILED= 20mA,constant current Note 7-3 : The LED driving condition is defined for each LED module. (4 LED Serial) Input current = 20mA * 2 = 40mA Note 7-4 : PLED = VLED-1 * ILED-1 + VLED-2* ILED-2 Remark Note 7-2 Note 7-3 Note 7-2Ε7-4 VLED-1 Anode Cathode VLED-2 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:8 P-511-528(V:1) PD040QT2 9. Display Color and Gray Scale Reference Color Input Color Data Green Red R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 Black Red (63) ʳ Green 63) Basic Colors Blue (63) Cyan ʳ Magenta ʳ ʳ Yellow White ʳ Red (00) ʳ Red (01) ʳ Red (02) ʳ Red Darker Ц ʳ Brighter ʳ ʳ Red (61) ʳ Red (62) Red (63) ʳ Green (00) ʳ Green (01) ʳ Green (02) ʳ Green Darker Ц ʳ Brighter ʳ ʳ Green (61) ʳ Green (62) Green (63) ʳ Blue (00) ʳ Blue (01) ʳ Blue (02) ʳ Blue Darker Ц ʳ Brighter ʳ ʳ Blue (61) ʳ Blue (62) Blue (63) Blue G0 B5 B4 B3 B2 B1 B0 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Ц Ц Ц Ц Ц Ц Ц Ц Ц Ц Ц Ц Ц Ц Ц Ц Ц Ц 1 1 1 1 1 1 1 1 1 1 1 1 0 1 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Ц Ц Ц Ц Ц Ц Ц Ц Ц Ц Ц Ц Ц Ц Ц Ц Ц Ц 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 0 1 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 1 0 Ц Ц Ц Ц Ц Ц Ц Ц Ц Ц Ц Ц Ц Ц Ц Ц Ц Ц 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 0 1 1 1 0 1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:9 P-511-528(V:1) PD040QT2 10. Interface Timing 10-1) Timing Parameters AC Electrical Characteristics (VCC =+3.3V,GND=0V,Ta=25к) Power supply CLK Frequency Period HSYNC Display period Pulse width Back-porch Front-porch Hpw+Hbp Hsync-CLK Period VSYNC DENB R,G,B Display period Pulse width Back-porch Front-porch Vpw+Vbp Horizontal scanning period Horizontal display period Vertical display period Frame cycling period CLK-DATA DATA-CLK Symbol VCC 1/tc tc Min. 3.0 5 10 - Typ. 3.3 6.3 50 63.6 400 320 30 38 12 68 16.8 262 240 3 15 6 18 Max. 3.6 7.0 Tc-10 288 - Unit V MHz ns us tc tc tc tc tc tc ns ms Hp Hp Hp Hp Hp Hp T1 - 400 - tc T2 - 320 - tc T3 - 240 - T1 T4 - 262 288 T1 Dcd Ddc 10 8 - - ns ns Hp Hdp Hpw Hbp Hfp Hhc Vp Vdp Vpw Vbp Vfp The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:10 P-511-528(V:1) PD040QT2 10-2) Timing Diagram a.1 Input signal range tc Dcd Blanking Data Ddc RΕGΕB RΕGΕB RΕGΕB a.2 HSYNC timing Hp HSYNC Hpw Hbp Hdp Hfp R,G,B Vaild data a.3 CLK,HSYNC relationship CLK Hhc HSYNC The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:11 P-511-528(V:1) PD040QT2 a.4 VSYNC timing DENB a.5 DENB timing Line 1 Line 480 Line 1 Line 2 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:12 P-511-528(V:1) PD040QT2 11. Power On Sequence VDD 3.0V 3.0V Signal*3 0.3V t2 t1 t3 Back Light ON OFF OFF 10ms 10ms 1. 0Іt1Љ20ms 2. 0Іt2Љ50ms 3. 0Іt3Љ1s 12. Optical Characteristics Ta = 25к 12-1) Specification: Parameter Viewing Angle Symbol Horizontal Ӱ21, Ӱ22 Ӱ12 Vertical Ӱ11 Contrast Ratio CR Luminance L x y Tr Tf U CTK White Chromaticity Response time Rise Fall Uniformity Cross Talk Ratio LED Life Time Condition CRЊ10 At optimized Viewing angle Ӱ=0̓ Ӱ=0̓ Ӱ=0̓ Ӱ=0̓ +25к MIN. 75 45 55 TYP. 80 50 60 MAX. ------- 200 400 --- 300 0.26 0.29 ----75 --20000 350 0.30 0.33 15 25 80 --30000 --0.34 0.37 30 50 --3.5 --- Unit deg deg deg Remarks Note 12-1 Note 12-2 cd/ф ms ms % % hrs Note 12-3 Note 12-5 Note 12-6 Note 12-4 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:13 P-511-528(V:1) PD040QT2 Note 12-1 : The definitions of viewing angles Note 12-2 : CR Ј Luminance when Testing point is White Luminance when Testing point is Black Contrast Ratio is measured in optimum common electrode voltage. Note 12-3 : The definition of response time : White Black White 100% 90% Brightness 10% 0% Tr Tf Note 12-4 : The “LED Life time “ is defined as the module brightness decrease to 50% original Brightness that the ambient temperature is 25к and ILED =40mA The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:14 P-511-528(V:1) PD040QT2 Note 12-5: The uniformity of LCD is defined as U = The Minimum Brightness of the 9 testing Points The Maximum Brightness of the 9 testing Points Luminance meter : BM-5A or BM-7 fast(TOPCON) Measurement distance : 500 mm +/- 50 mm Ambient illumination : < 1 Lux Measuring direction : Perpendicular to the surface of module The test pattern is white 1/6 2/6 2/6 1/6 1/6 2/6 2/6 1/6 ⏐YA-YB⏐ ͪ100% YA YA: Brightness of Pattern A YB: Brightness of Pattern B Luminance meter : BM 5A (TOPCON) Measurement distance : 500 mm +/- 50 mm Ambient illumination : < 1 Lux Measuring direction : Perpendicular to the surface of module Note 12-6: Cross Talk (CTK) = Pattern A Pattern B (Gray Level 31) (Gray Level 31, central black box exclusive) YA YB 1/3 1/3 1/3 1/3 1/3 1/3 Black : Measuring Point (A and B are at the same point.) (Gray Level 0) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:15 P-511-528(V:1) PD040QT2 13. Handling Cautions 13-1) Mounting of module A) Please power off the module when you connect the input/output connector. B) Polarizer which is made of soft material and susceptible to flaw must be handled carefully. C)Protective film (Laminator) is applied on surface to protect it against scratches and dirt. D)Please following the tear off direction as figure13-1 to remove the protective film as slowly as possible, so that electrostatic charge can be minimized. 13-2) Precautions in mounting A) When metal part of the TFT-LCD module (shielding lid and rear case) is soiled, wipe it with soft dry cloth. B) Wipe off water drops or finger grease immediately. Long contact with water may cause discoloration or spots. C) TFT-LCD module uses glass which breaks or cracks easily if dropped or bumped on hard surface. Please handle with care. D) Since CMOS LSI is used in the module. So take care of static electricity and earth yourself when handling. 13-3) Adjusting module A) Adjusting volumes on the rear face of the module have been set optimally before shipment. B) Therefore, do not change any adjusted values. If adjusted values are changed, the specifications described may not be satisfied. 13-4) Others A) Do not expose the module to direct sunlight or intensive ultraviolet rays for many hours. B) Store the module at a room temperature place. C) The voltage of beginning electric discharge may over the normal voltage because of leakage current from approach conductor by to draw lump read lead line around. D) If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel. Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes or feet. Wash it out immediately with soap. E) Observe all other precautionary requirements in handling general electronic components. F) Please adjust the voltage of common electrode as material of attachment by 1 module. 13-5) Polarizer mark The polarizer mark is to describe the direction of view angle film how to mach up with the rubbing direction. Figure 13-1 the way to peel off protective film The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:16 P-511-528(V:1) PD040QT2 14. Reliability Test No 1 2 3 4 5 6 Test Item High Temperature Storage Test Low Temperature Storage Test High Temperature Operation Test Low Temperature Operation Test High Temperature & High Humidity Operation Test Thermal Cycling Test (non-operating) 7 Vibration Test (non-operating) 8 Shock Test (non-operating) 9 Electrostatic Discharge Test (non-operating) Test Condition Ta = +85к, 240 hrs Ta = -40к, 240 hrs Ta = +85к, 240 hrs Ta = -30к, 240 hrs Ta = +60к, 90%RH, 240 hrs -30кШ+80к, 200 Cycles, 30 min 30 min Frequency:10~55HZ Amplitude: 1.5mm Sweep time:11 mins Test Period:6 Cycles for each direction of X,Y,Z 100G, 6ms Direction : ̈́X, ̈́Y, ̈́Z Cycle : 3 times 150pF, 330Ө Air : ±15KV ; Contact : ±8KV 10 times/point, 5 points/panel face Ta: ambient temperature Note : The protective film must be removed before temperature test. [Criteria] In the standard conditions, there is not display function NG issue occurred. (including : line defect ,no image).All the cosmetic specification is judged before the reliability stress. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:17 P-511-528(V:1) PD040QT2 15. Block Diagram ˨̆˸̅ ̆˼˺́˴˿ʳ ˼́̃̈̇ Vcc1 Vcc ˩˼˷˸̂ ˖̂́̇̅̂˿ Vcc2 Vcc ˗˖ˀ ˗˖ʳ ˖̂́̉˸̅̇˸̅ ˚˴̀̀˴ ˚˸́˸̅˴̇̂̅ ˚˴̀̀˴ ˙ˣ˖ ˦̂̈̅˶˸ ˗̅˼̉˸̅ ˜˖ ˇʵˤ˩˚˔ ˧˙˧ˀ˟˖˗ʳˣ˴́˸˿ ˩˗˗˅ ˩˶̂̀ ˩˶̂̀ ˚˸́˸̅˴̇̂̅ ˩˚˚ʳ˂ʳ˩˘˘ ˚˴̇˸ʳ˗̅˼̉˸̅ʳ˜˖ The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:18 P-511-528(V:1) PD040QT2 16. Packing The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:19