PROPRIETARY NOTE THIS SPECIFICATION IS THE PROPERTY OF HYDIS AND SHALL NOT BE REPRODUCED OR COPIED WITHOUT THE WRITTEN PERMISSION OF HYDIS AND MUST BE RETURNED TO HYDIS UPON ITS REQUEST TITLE : HV121WX5 - 114 Preliminary Product Specification for Customer FOR MORE INFORMATION: AZ DISPLAYS, INC. 75 COLUMBIA, ALISO VIEJO, CA 92656 Http://www.AZDISPLAYS.com HYDIS Technologies SPEC. NUMBER B2005-C001-D (1/3) PRODUCT GROUP TFT LCD REV. P4 ISSUE DATE 2011.01.04 PAGE 1 OF 32 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P4 2011.01. 04 DATE PREPARED Initial Release 10. 08.05 H.S LEE P1 Added EDID data 10. 08. 30 H.S.LEE P2 Updated SDRRS at EDID data 10. 09. 02 H.S.LEE P3 Corrected starting Pin No of CN1 in drawing (p21~p22) 10.10.01 H.S.LEE P4 Updated brightness table in EDID data 11.01.04 H.S.LEE REVISION HISTORY REV. ECN NO. 0 SPEC. NUMBER DESCRIPTION OF CHANGES SPEC TITLE HV121WX5-114 Preliminary Product Specification B2005-C001-D (2/3) PAGE 2 OF 32 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P4 2011.01.04 Contents No Item Page 1.0 General Description 4 2.0 Absolute Maximum Ratings 6 3.0 Electrical Specifications 7 4.0 Optical Specifications 9 5.0 Interface Connections 14 6.0 Input Signals, Basic Display Colors & Gray Scale of Colors 16 7.0 Power Sequence 19 8.0 Mechanical Characteristics 20 9.0 Mechanical Drawing 21 10.0 Reliability Test 23 11.0 Handling & Cautions 23 12.0 Labels 25 13.0 Packing Information 27 14.0 EDID 29 SPEC. NUMBER SPEC TITLE HV121WX5-114 Preliminary Product Specification B2005-C001-D (3/3) PAGE 3 OF 32 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P4 2011.01.04 1.0 GENERAL DESCRIPTION 1.1 Introduction HV121WX5-114 is a color active matrix TFT LCD module using amorphous silicon TFT's (Thin Film Transistors) as an active switching devices. This module has a 12.1 inch diagonally measured active area with WXGA resolutions (1280 horizontal by 800 vertical pixel array). Each pixel is divided into RED, GREEN, BLUE dots which are arranged in vertical Stripe and this module can display 262,144 colors. The TFT-LCD panel used for this module is a low reflection and higher color type. Source Driver LVDS Input Signal LVDS Rx + T/CON Gate Driver 1 (CN Connector DC/DC Gamma Vcom VDD TFT LCD Panel 1280 ശ800 BACK LIGHT (Fluorescent Lamp) 1 ) HVDD VDIM LED Driver Back Light (SMD LED Array) CN2 1.2 Features z Thin and Light Weight z 3.3 V Logic Power Supply z 12V Back-light Power Supply z 1 Channel LVDS Interface z SMD LED (48EA) Array (Bottom Side/Horizontal Direction) z 262,144 Colors z Data Enable Signal Mode z Side Mounting Frame z Green Product (RoHS) SPEC. NUMBER SPEC TITLE HV121WX5-114 Preliminary Product Specification B2005-C001-D (3/3) PAGE 4 OF 32 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P4 2011.01.04 1.3 Application z Tablet PC (Wide type) 1.4 General Specifications Parameter Specification Active area 261.12(H) ശ163.20(V) Number of pixels 1280(H) ശ800(V) Pixel pitch 0.204(H) ശ0.204(V) Pixel arrangement RGB Vertical Stripe Display colors 262,144 Display mode Normally Black Outline dimension 276.8r0.3(H) ശ180.0r0.3(V) ശ6.8(D:Max.) Weight 265(Typ.) / 275(Max.) Back-light SMD LED (48EA) Array Surface treatment Anti Glare, 2H Unit Remarks mm pixels mm colors mm Note 1 g Note 2 Note 1 : at PCB side Note 2 : without digitizer SPEC. NUMBER SPEC TITLE HV121WX5-114 Preliminary Product Specification B2005-C001-D (3/3) PAGE 5 OF 32 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P4 2011.01.04 2.0 ABSOLUTE MAXIMUM RATINGS The followings are maximum values which, if exceed, may cause faulty operation or damage to the unit. Ta=25+/-2¶C Parameter Symbol Min. Max. Unit Logic Power Supply Voltage VDD -0.3 4.0 V Logic Power Supply Voltage VIN -0.3 VDD+0.3 V HVDD -0.3 40 V Back-light LED Current ILED - 30 mA Back-light LED Reverse Voltage VR - 5 V Operating Temperature TOP 0 +50 Storage Temperature TSP -20 +60 Back-light Power Supply Voltage Remarks Note 1 Note 1, Note 2 Note 1. Ambient temperature vs allowable forward current are shown in the figure below. Note 2. Temperature and relative humidity range are shown in the figure below. 90% RH Max. ( 40 Ta) Maximum wet - bulb temperature at 39 or less. ( > 40) No condensation. Relative Humudity 100 (40, 90) 90 80 60 Operating Range (50, 50) 40 (60, 27) 20 Storage Range 5 -40 -20 0 20 40 60 80 Temperature (ఁ) SPEC. NUMBER SPEC TITLE HV121WX5-114 Preliminary Product Specification B2005-C001-D (3/3) PAGE 6 OF 32 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P4 2011.01.04 3.0 ELECTRICAL SPECIFICATIONS 3.1 Electrical Specifications < Table 3. Electrical Specifications > Parameter Min. Typ. Max. Unit Remarks Logic Power Supply Voltage VDD 3.0 3.3 3.6 V Note 1 Logic Power Supply Current IDD - 346 470 mA Note 1 Back-light Power Supply Voltage HVDD 6.0 12.0 20 V Note 2 Back-light Power Supply Current IHVDD - 255 305 mA Note 2, 3 Back-light Power Consumption PBL - 3.06 3.66 W Note 2, 3 Power Consumption (EBL) PEBL - 1.80 2.0 W Note 1, 2, 3 Ș - 82 - % Note 2, 3 Back-light PWM Frequency FPWM 200 280 1000 High Level PWM Signal Voltage VPWMH 2.1 3.3 5.0 V Low Level PWM Signal Voltage VPWML - 0 0.6 V Back-light LED Voltage / Back-light LED Total Voltage VLED /VBL - 3.1 / 37.2 3.5/ 42.0 V Note 4 Back-light LED Current / Back-light LED Total Current ILED /IBL - 16.9 / 67.6 17.8/ 71.2 mA Note 4 12,000 - - Hrs Based on LED PD - 1.00 1.55 W Note 1 PLED - 2.51 2.99 W Note 4 Ptotal - 3.51 4.54 W Note 1, 4 LED Driver’s Efficiency Life Time Power Consumption Notes : 1. The supply voltage is measured and specified at the interface connector of LCM. The current draw and power consumption specified is for 3.3V at 25. a) Typ : Window XP pattern, b) Max : Vertical Sub line pattern c) EBL : Mosaic pattern ( 32 X 32 ) 2. The power supply voltage and current is measured and specified at the interface connector of LCM including LED Driver. 3. Reference value, which is measured with LED Driver for 12V. 4. Reference value, which is measured without LED Driver. 5. Calculated value for reference (VLED ശ ILED Ý # of LEDs (48EA) ). SPEC. NUMBER SPEC TITLE HV121WX5-114 Preliminary Product Specification B2005-C001-D (3/3) PAGE 7 OF 32 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P4 2011.01.04 3.2 PWM Duty Ratio vs Brightness 100 Relative Brightness (%) 90 80 70 60 50 40 30 20 10 0 0 10 20 30 40 50 60 70 80 90 100 Duty Ratio (%) Notes : In case of duty ratio 0%, LED can’t illuminate itself so this state is LED off. In case of duty ratio 100%, the brightness of LED is maximum and the state is LED on. SPEC. NUMBER SPEC TITLE HV121WX5-114 Preliminary Product Specification B2005-C001-D (3/3) PAGE 8 OF 32 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P4 2011.01.04 4.0 OPTICAL SPECIFICATIONS 4.1 Overview The test of optical specifications shall be measured in a dark room (ambient luminance d 1 lux and temperature = 25r2) with the equipment of Luminance meter system (Goniometer system and TOPCON BM-5A) and test unit shall be located at an approximate distance 50cm from the LCD surface at a viewing angle of ș and ĭ equal to 0q. We refer to șØ=0 (=ș3 ) as the 3 o’clock direction (the “right”), șØ=90 (= ș12 ) as the 12 o’clock direction (“upward”), șØ=180 (= ș9 ) as the 9 o’clock direction (“left”) and șØ=270(= ș6 ) as the 6 o’clock direction (“bottom”). While scanning ș and/or Ø, the center of the measuring spot on the Display surface shall stay fixed. The backlight should be operating for 30 minutes prior to measurement. VDD shall be 3.3+/- 0.3V at 25qC. Optimum viewing angle direction is 6 o’clock. 4.2 Optical Specifications <Table 4. Optical Specifications> Parameter Symbol Horizontal Viewing Angle range Vertical Condition Ĭ3 Ĭ9 Ĭ12 CR > 10 Ĭ6 Min. Max. 89 90 Deg. - 89 90 Deg. - 89 90 Deg. - 89 90 Deg. 42 Luminance Contrast ratio Luminance of 5 Points White White 5 Points Luminance 13 Points uniformity White Chromaticity Red Green Blue CR Ĭ = 0q Yw ǻY5 Ĭ = 0q ǻY13 Wx Wy Rx Ry Gx Gy Bx By Ĭ = 0q Unit Remarks - Color Reproduction Reproduction of color Typ. Note 1 % - 500 - 190 220 - 80 - - 60 - - 0.283 0.313 0.343 0.299 0.329 0.359 Note 2 cd/m2 % Note 4 Note 5 TBD TBD Note 3 TBD Ĭ = 0q TBD TBD TBD Response Time Total (Tr + Td) Ta= 25q C Ĭ = 0q - 30 - ms Note 6 Cross Talk CT Ĭ = 0q - - 2.0 % Note 7 SPEC. NUMBER SPEC TITLE HV121WX5-114 Preliminary Product Specification B2005-C001-D (3/3) PAGE 9 OF 32 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P4 2011.01.04 Notes : 1. Viewing angle is the angle at which the contrast ratio is greater than 10. The viewing angles are determined for the horizontal or 3, 9 o’clock direction and the vertical or 6, 12 o’clock direction with respect to the optical axis which is normal to the LCD surface (see Figure1). 2. Contrast measurements shall be made at viewing angle of Ĭ= 0 and at the center of the LCD surface. Luminance shall be measured with all pixels in the view field set first to white, then to the dark (black) state (see Figure1). Luminance Contrast Ratio (CR) is defined mathematically as CR = Luminance when displaying a white raster / Luminance when displaying a black raster. 3. Reference only / Standard Front Surface Treatment Measured with green cover glass. The color chromaticity coordinates specified in Table 4 shall be calculated from the spectral data measured with all pixels first in red, green, blue and white. Measurements shall be made at the center of the panel. SPEC. NUMBER SPEC TITLE HV121WX5-114 Preliminary Product Specification B2005-C001-D (3/3) PAGE 10 OF 32 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P4 2011.01.04 4.3 Optical Measurements Figure 1. Measurement Set Up Photo detector ( TOPCON BM-5A) o Field = 2 50 cm TFT-LCD module LCD panel Center of the screen Optical characteristics measurement setup Figure 2. White Luminance and Uniformity Measurement Locations (5 points) Column 320 640 960 Row 200 400 600 Note 4. Luminance of white is defined as luminance values of 5 points across the LCD surface. Luminance shall be measured with all pixels in the view field set first to white. This measurement shall be taken at the locations shown in Figure 2 for a total of the measurements per display. * Yw = (Sum of 5 Points Luminance / 5 ) SPEC. NUMBER SPEC TITLE HV121WX5-114 Preliminary Product Specification B2005-C001-D (3/3) PAGE 11 OF 32 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P4 2011.01.04 Figure 3. Uniformity Measurement Locations (13 points) 200 400 600 Note 5. The White luminance uniformity on LCD surface is then expressed as : ǻY5 = (Minimum Luminance of five points / Maximum Luminance of five points) X 100% (see Figure 2) , ǻY13 = (Minimum Luminance of 13 points /Maximum Luminance of 13 points) X 100% (see Figure 3). Figure 4. Response Time Testing TFT Off (Black) TFT On (White) TFT Off (Black) Tr Td 100% 90% 10% 0% SPEC. NUMBER SPEC TITLE HV121WX5-114 Preliminary Product Specification B2005-C001-D (3/3) PAGE 12 OF 32 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P4 2011.01.04 Figure 5. Cross Modulation Test Description VIEW AREA VIEW AREA 320,200 960,200 YB(1120, 400) L31 320,600 L0 YA (1120, 400) Cross-Talk (%) = 960,600 YB - YA YB ശ 100 Where: YA = Initial luminance of measured area (cd/m2) YB = Subsequent luminance of measured area (cd/m2) The location measured will be exactly the same in both patterns Note 6. The electro-optical response time measurements shall be made as Figure 4 by switching the “data” input signal ON and OFF. The times needed for the luminance to change from 10% to 90% is Tr, and 90% to 10% is Td. Note 7. Cross-Talk of one area of the LCD surface by another shall be measured by comparing the luminance (YA) of a 25mm diameter area, with all display pixels set to a gray level, to the luminance (YB) of that same area when any adjacent area is driven dark (Refer to Figure 5). SPEC. NUMBER SPEC TITLE HV121WX5-114 Preliminary Product Specification B2005-C001-D (3/3) PAGE 13 OF 32 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P4 2011.01.04 5.0 INTERFACE CONNECTIONS 5.1 Electrical Interface Connection CN1 Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 Interface Connector (I-PEX, 20455-040E) Signal BIST AVDD AVDD DVDD NC SCL SDA Rin0Rn0+ GND Rin1Rn1+ GND Rin2Rn2+ GND ClkINClkIN+ GND NC NC GND NC NC GND NC NC GND NC NC VBLVBLVBLNC BLIM BL_Enable NC VBL+ VBL+ VBL+ SPEC. NUMBER Description Built In Self Test Power Supply, 3.3V (typical) Power Supply, 3.3V (typical) DDC 3.3V power No Connection DDC Clock DDC Data - LVDS differential data input (R0-R5, G0) + LVDS differential data input (R0-R5, G0) Ground - LVDS differential data input (G1-G5, B0-B1) + LVDS differential data input (G1-G5, B0-B1) Ground - LVDS differential data input (B2-B5,HS,VS, DE) + LVDS differential data input (B2-B5,HS,VS, DE) Ground - LVDS differential clock input + LVDS differential clock input Ground No Connection No Connection Ground No Connection No Connection Ground No Connection No Connection Ground No Connection No Connection LED Ground LED Ground LED Ground No Connection PWM for luminance control (200~1KHz, 3.3V, 10~100%) BL On/Off (On: 2.0~3.3V, Off: 0~0.5V) No Connection *LED Power Supply 6V-20V *LED Power Supply 6V-20V *LED Power Supply 6V-20V SPEC TITLE HV121WX5-114 Preliminary Product Specification B2005-C001-D (3/3) PAGE 14 OF 32 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P4 2011.01.04 5.2 Back-light Interface CN2 LED FPC Connector (04-6298-009, Manufactured by Kyocera) Pin No. Symbol Function 1 Anode1 LED Anode Power Supply 2 Anode2 LED Anode Power Supply 3 Anode3 LED Anode Power Supply 4 Anode4 LED Anode Power Supply 5 NC 6 Cathode1 LED Cathode Power Supply 7 Cathode2 LED Cathode Power Supply 8 Cathode3 LED Cathode Power Supply 9 Cathode4 LED Cathode Power Supply Remark LED Anode Power Supply (3.1V X 12EA = 37.2V) Non-Connection LED Cathode Power Supply 5.4 Data Input Format (1,1) (1279,1) (1280,1) (2,1) R G B R G B R G B R G B 1 Pixel = 3 Dots R G B R G B R G B R G B R G B (1,800) (2,800) (1279,800) (1280,800) SPEC. NUMBER SPEC TITLE HV121WX5-114 Preliminary Product Specification B2005-C001-D (3/3) PAGE 15 OF 32 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P4 2011.01.04 6.0. SIGNAL TIMING SPECIFICATIONS 6.1 The 12.1” WXGA LCM is operated by the only DE (Data enable) mode (LVDS Transmitter Input) Item Symbol Min. Typ. Max. Unit Frame Period T1 810 814 - Lines Vertical Display Period T2 - 800 - Lines One line Scanning Period T3 1350 1418 - Clocks Horizontal Display Period T4 - 1280 - Clocks 1/T5 - 69.3 - MHz Clock Frequency 7.0 SIGNAL TIMING WAVEFORMS 7.1 Timing Waveforms of Interface Signal T1 T2 DE T3 DCLK T5 T4 DE DATA SIGNALS SPEC. NUMBER Valid display data (1280 Clocks) SPEC TITLE HV121WX5-114 Preliminary Product Specification B2005-C001-D (3/3) PAGE 16 OF 32 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P4 2011.01.04 7.2 LVDS Rx Interface Timing Parameter The specification of the LVDS Rx interface timing parameter < LVDS Rx Interface Timing Specification> Item Symbol Min. Typ. Max. Unit Remarks CLKIN Period tRCIP 12.50 14.43 25.00 nsec Input Data 0 tRIP0 -0.4 0.0 +0.4 nsec Input Data 1 tRIP1 tRICP/7-0.4 tRICP/7 tRICP/7+0.4 nsec Input Data 2 tRIP2 2 ശtRICP/7-0.4 2 ശtRICP/7 2 ശtRICP/7+0.4 nsec Input Data 3 tRIP3 3 ശtRICP/7-0.4 3 ശtRICP/7 3 ശtRICP/7+0.4 nsec Input Data 4 tRIP4 4 ശtRICP/7-0.4 4 ശtRICP/7 4 ശtRICP/7+0.4 nsec Input Data 5 tRIP5 5 ശtRICP/7-0.4 5 ശtRICP/7 5 ശtRICP/7+0.4 nsec Input Data 6 tRIP6 6 ശtRICP/7-0.4 6 ശtRICP/7 6 ശtRICP/7+0.4 nsec tRIP6 tRIP5 tRIP4 tRIP3 tRIP2 tRIP1 tRIP0 RxINz +/* Z = 0, 1, 2 Rx RxCLKIN+/- Rx Rx Rx Rx Rx Rx Rx Rx Vdiff=0[v] Rx Rx Vdiff=0[v] tRCIP SPEC. NUMBER SPEC TITLE HV121WX5-114 Preliminary Product Specification B2005-C001-D (3/3) PAGE 17 OF 32 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P4 2011.01.04 6.0 INPUT SIGNALS, BASIC DISPLAY COLORS & GRAY SCALE OF COLORS Each color is displayed in sixty-four gray scales from a 6 bit data signal input. A total of 262,144 colors are derived from the resultant 18 bit data. Colors & Gray Scale Black Blue Green Cyan Basic Colors Red Magenta Yellow White Black ଠ Darker Gray ଠ Scale Of ଢ Red Brighter ଢ Red Black ଠ Darker Gray ଠ Scale Of ଢ Green Brighter ଢ Green Black ଠ Darker Gray ଠ Scale Of ଢ Blue Brighter ଢ Blue Black ଠ Gray Darker Scale ଠ Of White ଢ & Brighter Black ଢ White SPEC. NUMBER Red Data Green Data R5 R4 R3 R2 R1 R0 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 1 1 1 1 0 0 1 0 0 0 0 1 1 1 1 0 1 0 0 0 1 1 0 0 1 1 0 0 0 0 0 1 1 0 0 1 1 0 0 0 0 0 1 1 0 0 1 1 0 0 0 Ļ Ļ 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 0 0 0 0 0 0 1 1 1 0 0 0 0 0 0 0 0 0 0 1 1 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 1 1 1 0 0 1 1 0 0 1 1 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 0 1 0 1 0 1 0 1 0 0 0 B3 B2 0 1 0 1 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 0 0 0 0 1 1 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Ļ Ļ 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 0 1 1 1 1 1 1 1 1 1 1 B0 0 1 0 1 0 1 0 1 0 0 0 0 1 0 1 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 1 1 1 0 0 0 0 1 1 0 0 1 1 0 1 0 1 0 1 1 1 0 1 1 1 0 1 Ļ Ļ 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 Ļ Ļ 1 1 1 B1 0 1 0 1 0 1 0 1 0 0 0 Ļ Ļ Ļ Ļ 1 1 1 0 1 1 1 0 1 SPEC TITLE HV121WX5-114 Preliminary Product Specification B2005-C001-D (3/3) 0 1 0 1 0 1 0 1 0 0 0 Ļ Ļ 0 0 0 0 0 0 1 1 1 0 0 0 Ļ Ļ 1 1 1 0 0 1 1 0 0 1 1 0 0 0 Ļ Ļ Ļ Ļ 0 0 0 0 0 0 0 0 1 1 0 0 1 1 0 0 0 Ļ Ļ Ļ Ļ 0 0 0 0 0 0 Blue Data G5 G4 G3 G2 G1 G0 B5 B4 1 1 1 1 1 1 1 1 1 PAGE 18 OF 32 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P4 2011.01.04 7.0 POWER SEQUENCE To prevent a latch-up or DC operation of the LCD module, the power on/off sequence shall be as shown in below 0.9VDD Power Supply 0.9VDD 0.1VDD 0.1VDD 0V T1 T5 T7 T2 T6 Interface Signal Valid 0V T3 Back- light T4 0V ̻ T1 d 10 ms ̻ 0 d T2 d 50 ms ̻ 200 ms d T3 ̻ 200 ms d T4 ̻ 0 d T5 50 ms ̻ 0 d T6 d 10ms ̻ 500ms d T7 Notes : 1. When the power supply VDD is 0V, Keep the level of input signals on the low or keep high impedance. 2. Do not keep the interface signal high impedance when power is on. 3. Back Light must be turn on after power for logic and interface signal are valid. SPEC. NUMBER SPEC TITLE HV121WX5-114 Preliminary Product Specification B2005-C001-D (3/3) PAGE 19 OF 32 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P4 2011.01.04 8.0 MECHANICAL CHARACTERISTICS 8.1 Dimensional Requirements Figure 6 & 7 (located in 9.0) shows mechanical outlines for the model Parameter Specification Active Area 261.12(H) X 163.20(V) Number of pixels 1280(H) X 800(V) (1 pixel = R + G + B dots) Pixel pitch 0.204(H) X 0.204(V) Pixel arrangement RGB Vertical stripe Display colors 262,144 Display mode Normally Black Outline dimension 276.8ധ0.3(H)ശ180.0(V)ധ0.3ശ6.8(D:Max.) Weight 265(Typ.) / 275(Max.) Back-light SMD LED (48EA) Array Unit mm mm g 8.2 Mounting See Figure 6 & 7 & 8. (shown in 9.0) Parameter Specification Unit Torque of side mounting screw 2.5(Max.) Kgf.cm2 Torque of ground plate screw 1.5(Max.) Kgf.cm2 Torque of top side screw 2.5(Max.) Kgf.cm2 8.3 Anti-Glare and Polarizer Hardness. The surface of the LCD has an anti-glare coating to minimize reflection and a coating to reduce scratching. 8.4 Light Leakage There shall not be visible light from the back-lighting system around the edges of the screen as seen from a distance 50cm from the screen with an overhead light level of 150lux. The manufacture shall furnish limit samples of the panel showing the light leakage acceptable. SPEC. NUMBER SPEC TITLE HV121WX5-114 Preliminary Product Specification B2005-C001-D (3/3) PAGE 20 OF 32 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P4 2011.01.04 9.0 Mechanical Drawing Figure 6. TFT-LCD Module Outline Dimension (Front View) SPEC. NUMBER SPEC TITLE HV121WX5-114 Preliminary Product Specification B2005-C001-D (3/3) PAGE 21 OF 32 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P4 2011.01.04 Figure 7. TFT-LCD Module Outline Dimensions (Rear view) SPEC. NUMBER SPEC TITLE HV121WX5-114 Preliminary Product Specification B2005-C001-D (3/3) PAGE 22 OF 32 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P4 2011.01.04 10.0 RELIABLITY TEST The Reliability test items and its conditions are shown in below. <Table 12. Reliability Test> No Test Item Conditions 1 High temperature storage test Ta = 60 qC, 240 hrs 2 Low temperature storage test Ta = -20 qC, 240 hrs 3 High temperature & high humidity operation test Ta = 50 , 80%RH, 240hrs 4 High temperature operation test Ta = 50 qC, 240 hrs 5 Low temperature operation test Ta = 0 qC, 240 hrs 6 Thermal shock Ta = -20 qC l 60 qC (30 min), 100 cycle 7 Vibration test (non-operating) Frequency : 10~500Hz Gravity/AMP : 1.5G Period : X,Y,Z 30min 8 Shock test (non-operating) Gravity : 220G Pulse width : 2ms, half sine wave ρX, ρY, ρZ Once for each direction 9 Electro-static discharge test (non-operating) Air : 150pF, 330ohm, 15KV Contact : 150pF, 330ohm, 8KV 11.0 HANDLING & CAUTIONS 11.1 Cautions when taking out the module y Pick the pouch only, when taking out module from a shipping package. 11.2 Cautions for handling the module y As the electrostatic discharges may break the LCD module, handle the LCD module with care. Peel a protection sheet off from the LCD panel surface as slowly as possible. y As the LCD panel and back - light element are made from fragile glass (epoxy) material, impulse and pressure to the LCD module should be avoided. y As the surface of the polarizer is very soft and easily scratched, use a soft dry cloth without chemicals for cleaning. y Do not pull the interface connector in or out while the LCD module is operating. y Put the module display side down on a flat horizontal plane. y Handle connectors and cables with care. SPEC. NUMBER SPEC TITLE HV121WX5-114 Preliminary Product Specification B2005-C001-D (3/3) PAGE 23 OF 32 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P4 2011.01.04 11.3 Cautions for the operation y When the module is operating, do not lose MCLK, DE signals. If any one of these signals were lost, the LCD panel would be damaged. y Obey the supply voltage sequence. If wrong sequence is applied, the module would be damaged. 11.4 Cautions for the atmosphere y Dew drop atmosphere should be avoided. y Do not store and/or operate the LCD module in a high temperature and/or humidity atmosphere. Storage in an electro-conductive polymer packing pouch and under relatively low temperature atmosphere is recommended. 11.5 Cautions for the module characteristics y Do not apply fixed pattern data signal to the LCD module at product aging. y Applying fixed pattern for a long time may cause image sticking. 11.6 Cautions for the digitizer assembly y When assembling FPC connector, do not flip connector past 90¶ due to possible damage to connector. y When positioning digitizer underneath driver IC, do not lift driver IC past 90¶ due to possible damage to drive IC pattern. y Please be warned that during assembly of digitizer, the opening or closing of FPC will result in possible electrostatic discharge damage to the LED 11.7 Other cautions y Do not re-adjust variable resistor or switch etc. y When returning the module for repair or etc., Please pack the module not to be broken. We recommend to use the original shipping packages. SPEC. NUMBER SPEC TITLE HV121WX5-114 Preliminary Product Specification B2005-C001-D (3/3) PAGE 24 OF 32 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P4 2011.01.04 12.0 LABELS 12.1 Product Label HYDIS Barcode 1 2 3 4 5 X X X X X X X 7 6 X X X X X X X X X X No 1. Control Number No 5. Month (1, 2, 3,…, 9, X, Y, Z) No 2. Rank / Grade No 6. FG Code No 3. Line Classification (HYDIS : H) No 7. Serial Number No 4. Year (5 : 2005, 6 : 2006, …) SPEC. NUMBER SPEC TITLE HV121WX5-114 Preliminary Product Specification B2005-C001-D (3/3) PAGE 25 OF 32 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P4 2011.01.04 12.2 Packing Label Label Size: 108 mm (L) u 56 mm (W) Contents Model: HV121WX5-114 Q`ty: Module Q`ty in one box Serial No.: Box Serial No. See next figure for detail description. Date: Packing Date FG Code: FG Code of Product MODEL : HV121WX5-114 Q’TY : 10 SERIAL NO. : 0000000000000 DATE : XXXX. XX. XX 00 0 00 0 0 000000 Type Grade Year Month ITEM-CODE Serial_no SPEC. NUMBER FG CODE SPEC TITLE HV121WX5-114 Preliminary Product Specification B2005-C001-D (3/3) RoHS Mark PAGE 26 OF 32 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P4 2011.01.04 13.0 PACKING INFORMATION 13.1 Packing order Put Pad into the box. Put silica gels in the box. After sealing the box, attach Packing Label on the attach position sign area of the box. Place a cover on the top of the box. As shown in the figure, place the Modules bundled by shielding bag in the box. 13.2 Notes z Box Dimension : 349.0mm(W) X 261.0mm(D) X 311.0mm(H) z Package Quantity in one Box : 10pcs SPEC. NUMBER SPEC TITLE HV121WX5-114 Preliminary Product Specification B2005-C001-D (3/3) PAGE 27 OF 32 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P4 2011.01.04 13.2 wGw * Note z z z Pallet Dimension : aGXXWWGGOsPGu XXWWGGO~PGu XYWGGOoP Package Quantity in one Box : 10pcs Box Quantity in one Pallet : 36 box SPEC. NUMBER SPEC TITLE HV121WX5-114 Preliminary Product Specification B2005-C001-D (3/3) PAGE 28 OF 32 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P4 2011.01.04 14.0 EDID Table Address Hex Dec values. Notes 0 255 255 255 255 255 255 0 9 229 160 8 0 0 0 0 0 20 1 4 149 26 16 120 0 255 255 255 255 255 255 0 EDID Header BOE ID = BOE 2208 ID = 2208 Week of manufacture Year of Manufacture EDID Structure Ver. EDID revision # Video input definition Max H image size Max V image size Display Gamma 00 FF FF FF FF FF FF 00 09 E5 A0 08 00 00 00 00 0 14 01 04 95 1A 10 78 18 Feature support 2A 42 19 1A 1B 1C 1D 1E 1F 20 21 22 Red/Green low bits Blue/White low bits Red x high bits Red y high bits Green x high bits Green y high bits Blue x high bits BLue y high bits White x high bits White y high bits 92 75 90 59 5A 90 26 1D 50 54 146 117 144 89 90 144 38 29 80 84 (HEX) 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 10 11 12 13 14 15 16 17 Function Header ID Manufacturer Name ID Product Code 32-bit serial No. SPEC. NUMBER 0 2010 1 4 26 16 2.2 0.564 0.349 0.352 0.565 0.150 0.117 0.313 0.329 Manufactured in 2010 EDID Ver 1.0 EDID Rev. 0.4 Refer to right table 26 cm (Approx) 16 cm (Approx) Gamma curve = 2.2 RGB display, Preferred Timming mode Red / Green Low Bits Blue / White Low Bits Red (x) = 10010000 (0.56416) Red (y) = 01011001 (0.3491) Green (x) = 01011010 (0.35152) Green (y) = 10010000 (0.5648) Blue (x) = 00100110 (0.14956) Blue (y) = 00011101 (0.1166) White (x) = 01010000 (0.313) White (y) = 01010100 (0.329) SPEC TITLE HV121WX5-114 Preliminary Product Specification B2005-C001-D (3/3) PAGE 29 OF 32 A4(210 X 297) Address PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P4 2011.01.04 Function Hex Dec values. Notes Established timing 1 Established timing 2 Established timing 3 00 00 00 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 12 1B 00 8A 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 18 27 0 138 - Refer to right table 3A 50 80 - 3B 3C 20 0E 32 14 800 14 3D 30 48 - 1A 16 22 00 26 22 34 0 26 22 2 2 42 05 5 261 43 A3 163 163 44 10 16 - 45 46 47 00 00 19 0 0 25 0 0 - (HEX) 23 24 25 26 27 28 29 2A 2B 2C 2D 2E 2F 30 31 32 33 34 35 36 37 38 39 3E 3F 40 41 Standard timing #1 Standard timing #2 Standard timing #3 Standard timing #4 Standard timing #5 Standard timing #6 Standard timing #7 Standard timing #8 Detailed timing/monitor descriptor #1 SPEC. NUMBER Not Used Not Used Not Used Not Used Not Used Not Used Not Used Not Used 69.3000 69.3MHz Main clock 1280 138 Hor Active = 1280 Hor Blanking = 138 4 bits of Hor. Active + 4 bits of Hor. Blanking Ver Active = 800 Ver Blanking = 14 4 bits of Ver. Active + 4 bits of Ver. Blanking Hor Sync Offset = 26 H Sync Pulse Width = 22 V sync Offset = 2 line V Sync Pulse width : 2 line Horizontal Image Size = 261 mm (Low 8 bits) Vertical Image Size = 163 mm (Low 8 bits) 4 bits of Hor Image Size + 4 bits of Ver Image Size Hor Border (pixels) Vertical Border (Lines) Refer to right table SPEC TITLE HV121WX5-114 Preliminary Product Specification B2005-C001-D (3/3) PAGE 30 OF 32 A4(210 X 297) Address Function PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P4 2011.01.04 Hex Dec 0C 12 0 8A 12 18 0 138 4C 50 80 - 4D 4E 4F 50 51 52 53 54 55 56 57 58 59 5A 5B 5C 5D 5E 5F 60 61 62 63 64 65 66 67 68 69 6A 6B 20 0E 30 1A 16 22 00 05 A3 10 00 00 19 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 32 14 48 26 22 34 0 5 163 16 0 0 25 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 800 14 26 22 2 2 261 163 0 0 0 0 0 0 0 0 0 0 0 0 0 (HEX) 48 49 4A 4B Detailed timing/monitor descriptor #2 (sDRRS 40Hz) Detailed timing/monitor descriptor #3 (nvDPS) SPEC. NUMBER values. 46.2000 1280 138 0 0 0 0 0 0 0 SPEC TITLE HV121WX5-114 Preliminary Product Specification B2005-C001-D (3/3) Notes PAGE 31 OF 32 A4(210 X 297) Address Function PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P4 2011.01.04 Hex Dec values. 00 00 00 0 0 0 0 0 0 6F 02 2 2 70 71 72 73 74 75 76 00 19 3D E5 1A 3C 78 0 25 61 229 26 60 120 0 - 77 19 25 1000 78 79 7A 7B 7C 7D 7E 7F 14 22 7D 00 00 00 00 4D 20 34 125 0 0 0 0 77 800 2740 250 0 0 0 0 - (HEX) 6C 6D 6E Detailed timing/monitor descriptor #4 (Brightness Table) Extension flag Checksum Notes Detailed Timing Description #4 Flag Reserved For Brightness Table and Power consumption Flag PWM 10% [7:0] @ Step 0 PWM 24% [7:0] @ Step 5 PWM 90% [7:0] @ Step 10 26Nits [7:0] @ Step 0 60Nits [7:0] @ Step 5 240Nits [7:0] @ Step 10 Panel Electronics Power @32x32 Chess Pattern Backlight Power @60 nits Backlight Power @Step 10 Nits @ 100% PWM Duty Flags Flags Flags GuGaGiGGlkpkGGGGXGU SPEC. NUMBER SPEC TITLE HV121WX5-114 Preliminary Product Specification B2005-C001-D (3/3) PAGE 32 OF 32 A4(210 X 297)