Bluetooth Module, BCD100 The Parani-BCD100 Features · Bluetooth Class 1 · Fully qualified with Bluetooth v2.0 + EDR specification · Transmit Power: +18dBm Typical · Receive sensitivity: -90dBm (0.1% BER) · Size: 27.1 x 14.8 x 2.4mm with shield can · Extended operating temperature range: -20˚C ~ +80˚C · Integrated 8Mbit Flash Memory · USB, Dual UART, I2C, PCM, PIO interfaces · 802.11 co-existence · Field-proven SPP (Serial Port Profile) firmware supporting up to 4 simultaneous multiple connections · RoHS Compliant Specifications Bluetooth Fully qualified with Bluetooth v2.0 +EDR specification EDR (Enhanced Data Rate) compliant with v2.0 of specification for both 2Mbps and 3Mbps Transmit Power +18dBm Typical (Class1) Receive Sensitivity -90dBm (0.1% BER) TX Output SpectrumFrequency range 2401 MHz ~ 2480 MHz UART Up to 921 kbps USB V1.2 Interface UART, USB, I2C, PCM, PIO Power 2.7V~3.6V Operating Temperature -20˚C ~ +80˚C Physical Properties 27.1 mm x 14.8 mm x 2.4 mm ( 1.06 in x 0.58 in x 0.09 in ) Approval Bluetooth SIG (QDID: B015728) is a Bluetooth Class 1 OEM module for OEM manufacturers who want to implement Bluetooth Class 1 functionality with their products cost effectively and also in timely manner. Users can build their own antenna circuit around the BCD100 to lower the overall cost while benefit from the BCD100’s field-proven standard SPP (Serial Port Profile) firmware provided with no additional cost. The BCD100 supports Class 1 Bluetooth transmission level for longer communication distance. The BCD100 supports UART, USB, I2C, PCM, PIO interfaces for the communication with the OEM products. The BCD100 is provided with Bluetooth v2.0 compatible firmware runs internally for SPP (Serial Port Profile) applications by default. The SPP firmware supports up to 4 simultaneous multiple connections and is designed to work out-of-box for real world SPP applications such as POS (Point-of-sales), industrial automation, remote metering and other various applications. Optionally, the BCD100 can be supplied with only software stack up to HCI level so entire Bluetooth stack runs on the host side for the application such as USB dongles for computers, or OEM manufacturers can even develop and embed their own firmware into the BCD100. The BCD100 is fully qualified with Bluetooth v.2.0+EDR specification so OEM manufacturers can save cost and time for overall OEM product certifications, which makes the BCD100 ideal solution for larger volume and cost sensitive applications. Device Diagram Parani-BCD100 USB RF_IN/OUT RF Amplifier Circuit RAM 2.4GHz Radio UART Baseband DSP LNA IO SPI PA Voltage Regulator 1.8V core MCU PIO BlueCore4 External PCM Crystal 26Mhz www.sena.com Flash Memory 8Mb VCC 3.3V Bluetooth Module, BCD100 Pin Description Applications 1 36 2 35 3 34 4 33 5 32 6 31 7 30 8 29 9 28 10 27 11 26 12 25 13 24 14 23 15 22 16 21 17 20 18 19 · High-speed data transceiver systems for long distance communication · PCs/Personal Digital Assistants (PDA) · Bluetooth USB dongle · Bluetooth serial dongle · Bluetooth access points · Industrial automation devices · Remote metering devices · POS (Point-of-sales) devices Software Stack Function Pin Name Pin Number Description USB Interface USB_DP 11 USB data plus USB_DN 10 USB data minus UART Interface UART_TXD 8 UART data output UART_RXD 7 UART data input UART_RTS 6 UART request to send active low UART_CTS 9 UART clear to send active low PCM_OUT 15 Synchronous data output PCM_IN 12 Synchronous data input PCM_SYNC 13 Synchronous data sync PCM_CLK 14 Synchronous data clock SPI_MISO 20 SPI data output SPI_MOSI 23 SPI data input SPI_CSB 22 Chip select for SPI, active low SPI_CLK 21 SPI clock PIO_2 29 Programmable input/output line PIO_3 28 Programmable input/output line PIO_4 24 Programmable input/output line PIO_5 25 Programmable input/output line PIO_6 26 Programmable input/output line PIO_7 27 Programmable input/output line PIO_8 30 Programmable input/output line PIO_9 31 Programmable input/output line PIO_10 32 Programmable input/output line PIO_11 33 Programmable input/output line AIO_0 4 Analogue programmable input/output line AIO_1 5 Analogue programmable input/output line PVCC 3 Power supply for power amplifier, 3.3V +3V3 16 Power supply for system, 3.3V GND 1 Ground GND 2 Ground GND 17 Ground GND 19 Ground GND 34 Ground PCM Interface SPI Interface PIO Interface Power Others GND 35 Ground RF_I/O 36 Transmitter output/receiver input RESETB 18 Reset, active low, > 5ms to cause a reset BCD100 is provided with Bluetooth v2.0 compatible firmware runs internally for SPP (Serial Port Profile) applications by default. The firmware is designed to work out-of-box for real world SPP applications such as POS (Point-of-sales), industrial automation, remote metering and other various applications. Optionally, the BCD100 can be supplied with only software stack up to HCI level so users can develop and embed their own firmware version into the BCD100 or entire Bluetooth stack runs on the host side for the application such as USB dongle for computers. Regarding these custom firmware options, please contact a Sena representative for more detail. Ordering Information Part Number Description BCD100-01 Bluetooth v2.0+EDR class 1 OEM module, Reel type package, Minimum order quantity 100 BCD100-02 Parani-BCD100 OEM Bluetooth Module, Bluetooth v2.0+EDR, Class 1 (HCI) For more information, please visit us at http://www.sena.com U.S. / Canada / South America Tel: 408-448-1997 Fax: 408-907-3738 Sales and Support Toll Free (US/Canada): 8669-US-SENA (866-987-7362) General Information Toll Free (US/Canada): 8668-US-SENA (866-887-7362) EU / Africa Tel: +33 (0)1 53 53 16 29 Fax: +33 (0)1 70 24 70 90 Asia / Pacific Tel: +82-2-576-7362 Fax: +82-2-573-7710 Contact us via E-mail General Information: [email protected] Sales & Distribution: [email protected] Technical Support: [email protected] www.sena.com