SF11 Series

COMPONENTS PRODUCT INFORMATION
NEW
CONNECTOR
Plug in Card Connector
Compatible with GSM 11.11 Standard
SF11 Series
MB-0241-1
January 2012
RoHS Compliant
Without Detection Switch
With Detection Switch
The SF11 Series is a tray type connector compatible with the GSM 11.11 standard
Plug in SIM card for GSM mobile phones. (SIM: Subscriber Identification Module)
Features
•Plug in SIM card connector compatible with GSM 11.11 standard.
•Low profile, 1.9mm height.
•Available with and without card detection switch. (Refer to above images).
•Connector main body is provided in embossed tape packaging (compatible with
second reflow).
•Card tray is ejected by inserting an eject-pin.
•Lock structure holds tray in place and gives a clear click feeling when the tray is
fully mated.
General Specification
•No. of Contacts: 6 position
•Rated Current: 0.5A
•Contact Resistance: 100m max.
(Switch: 1 max.)
•Insulation Resistance:
Initial: 1000M  min.
After test: 100M min.
•Dielectric Withstanding Voltage:
AC500Vr.m.s 1minute
•Lifetime: 5,000 times
•Operating Temperature:
-25 Deg. C to +85 Deg. C
1/5
JAE PMK Div. Proprietary. Copyright © 2012, Japan Aviation Electronics Industry, Ltd.
MB-0241-1
Materials and Finishes
Component
Material / Finish
Contact
Copper alloy / 0.5 min. Au over Ni (contact area)
Housing
Glass filled LCP / None (UL94V-0)
Cover Frame
Stainless steel / None,
Au plating over Ni (terminal area only)
Ordering Information
SF11 V 006S 4 B R****
Series Name
Tray type
SMT Mounting
V: With hold downs
Embossed Product
Modification
B: Reverse, without switch
C: Standard, with switch
No. of Contacts: 6 pos.
Terminal Finish
4: Au 0.5m min.
2/5
JAE PMK Div. Proprietary. Copyright © 2012, Japan Aviation Electronics Industry, Ltd.
MB-0241-1
Part Number
SJ Drawing
SF11V006S4C (Main body of connector)
SJ111358
SF11V006S4CR1000 (Embossed packaging)
SJ111359
Standard
Mount
Type
Unit: mm
SW
C2
C5
C5
C4
C3
C6
C7
C6
C7
T1114
C2
C1
C3
C
SW
C1
C8
PUSH STROKE
EJECT STROKE
T1114 C
Tray Ejection
3/5
JAE PMK Div. Proprietary. Copyright © 2012, Japan Aviation Electronics Industry, Ltd.
MB-0241-1
Part Number
SJ Drawing
SF11V006S4B (Main body of connector)
SJ110546
SF11V006S4BR1000 (Embossed packaging)
SJ110564
Reverse
Mount
Type
Unit: mm
C1
C2
C2
C3
C4
C3
C5
C5
C6
C7
C6
C7
T0312
B
C1
C8
EJECT STROKE
PUSH STROKE
Tray Ejection
4/5
JAE PMK Div. Proprietary. Copyright © 2012, Japan Aviation Electronics Industry, Ltd.
MB-0241-1
Applicable Board Dimensions
Note
2
注2
C1
SW
GND
C8
C5
C6
(SW)
GND
(C1～C4)
GND
(C5～C8)
GND
(C5～C8)
Note
注1 1
Note
3
注3
C3 C4
(SW)
SW
C2
(C1～C4)
Unit: mm
C7
PCB EDGE
APPLICABLE P.C.B. DIMENSION(REF.)
適合基板寸法(参考)
Note 1: Bottom area is metal (ground) so only ground pattern and ground via hole
are allowed in this area.
Note 2: Pattern and via hole cannot be applied to this area due to moving parts.
Note 3: Bottom area is switch contact so only switch contact pattern and switch
contact via is allowed in this area.
*Please refer to SJ drawing when
considering this product.
Product Marketing Division
Aobadai Building, 3-1-19, Aobadai, Meguro-ku, Tokyo 153-8539
Phone: +81-3-3780-2787 FAX: +81-3-3780-2946
Notice: Products shown in this brochure are
made for the applications listed below. However,
if the above-mentioned products are to be used in
aerospace devices, marine cable-connection
devices, atomic power control systems, medical
equipment for life-support systems, or any other
specific application requiring extremely high
reliability, please contact JAE for further
information.
Recommended applications: Computers, Office
machines, Measuring devices,
Telecommunication devices (Terminals, Mobile
devices), AV devices, Household applications, FA
devices, etc.
* The specifications in this brochure are subject to change without notice. Please contact JAE for information.
JAE PMK Div. Proprietary. Copyright © 2012, Japan Aviation Electronics Industry, Ltd.
5/5