SF70 Series

COMPONENTS PRODUCT INFORMATION
NEW
CONNECTOR
nanoSIM Card Connector
MB-0275-1
January 2014
SF70 Series
RoHS Compliant
<Drawing when a tray is inserted>
Note: Tray is not included. Tray is to be prepared by customers.
<<Outline>>
Recently, smartphones and tablet PC have been equipped with nanoSIM cards.
The SF70 Series is a push-eject tray type (ejected by pushing pin) connector compatible
with the nanoSIM card.
(SIM: Subscriber Identity Module)
Features
1.25mm height, 13.3mm width, and 14.8mm depth, low-profile, space-saving.
Superior resistance against drop with original lock structure.
Card mis-insertion measures, card detection with SW (normal open).
Structure that enables visual check / repair of terminal area after SMT mounting.
Balanced 7 hold-down points for good EMI performance.
Pb-free, halogen-free compliant product.
Supports automated mounting with embossed tape.
General Specifications
■No. of Contacts: 6 pos.
■Contact Resistance: 100mΩ max. (initial)
■Dielectric Withstanding Voltage:
AC500Vr.m.s for 1 minute
■Operating Temperature:
-25 Deg. C to +85 Deg. C
■Rated Current: 0.5A per terminal
■Rated Voltage: 10V per terminal
■Durability: 5,000 times
JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd.
1/6
MB-0275-1
How to Eject Tray
1. Insert a pin into the hole
on the tray straightly.
2. Push a pin in until a tray
ejects.
3. Pull the end with finger
tips and draw out a tray.
nanoSIM card
Tray
Note: Tray is not included.
Tray is to be prepared
by customers.
JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd.
2/6
MB-0275-1
Materials and Finishes
Component
Material and Finish
Signal Contact
D-SW Contact
Copper alloy / Contact area Au plating over Ni
Termination area Au flash plating over Ni
Housing
Synthetic resin / None
Cover Frame
Stainless steel / Terminal area: Au flash plating over Ni
Eject Bar
Stainless steel / None
Eject Lever
Stainless steel / None
Ordering Information
SF70 S
006
V
B
A (R2000)
Reeled Part
Number (Note)
Series
Connector Type
Modification Code
S: NON-ZIF
structure
No. of Contacts
B: Au / Au flash plating
V: SMT mounting with hold-down
Note: An embossed tape reel contains 2,000 pieces.
Please contact us concerning packaging specifications.
JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd.
3/6
MB-0275-1
Part Number
SF70S006VBA
SJ Drawing
SJ113425
General Specifications
Tray
Note 1: The tray shown in this drawing is
for reference only. Tray is to be prepared
by customers.
Note 2: This drawing is for reference only.
Please refer to the latest drawing when
considering use of this product.
Hole for eject pin
Table 1 CIRCUIT
JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd.
Unit: mm
4/6
MB-0275-1
Recommended Tray
Unit: mm
Note 1: Above are recommended dimensions for tray designed by customers.
Note 2: Above drawing is for reference only. Please refer to the most updated product
drawing when considering use of this product.
JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd.
5/6
MB-0275-1
Recommended Board Patterns
NOTE 1: ONLY GND PATTERN AND VIA HOLE IN ALLOWED IN THIS AREA.
NOTE 2: NO PATTERN , NO VIA HOLE IN THIS AREA.
Note 3: Above drawing is for reference only. Please refer to the most updated product
drawing when considering use of this product.
Notice: Products shown in this brochure are made
Product Marketing Division
Aobadai Building, 3-1-19, Aobadai, Meguro-ku, Tokyo 153-8539
Phone: +81-3-3780-2882 FAX: +81-3-3780-2946
for the applications listed below. However, if the
above-mentioned products are to be used in aerospace
devices, marine cable-connection devices, atomic
power control systems, medical equipment for lifesupport systems, or any other specific application
requiring extremely high reliability, please contact
JAE for further information.
Recommended applications: Computers, Office
machines, Measuring devices, Telecommunication
devices (Terminals, Mobile devices), AV devices,
Household applications, FA devices, etc.
* The specifications in this brochure are subject to change without notice. Please contact JAE for information.
JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd.
6/6