SPECIFICATION FOR APPROVAL REF. : PROD. NAME DH6038□□□□F□-□□□ ABC'S DWG NO. Shielded SMD Power Inductor REV. 20150824-D PAGE 1 Ⅰ﹒Configuration and dimensions: A C B 330 E H D I G R I D ( PCB Pattern ) Unit:m/m A B C D E G H I R 6.70 ±0.3 6.70 ±0.3 4.00 max. 2.10 typ. 2.50 typ. 2.40 ref. 7.30 ref. 2.40 ref. 3.00 ref. Ⅱ﹒Description: a﹒Ferrite drum core construction. b﹒Magnetically shielded. c﹒Enamelled copper wire:F class Peak Temp:250℃ max. Max. Peak Temp - 5℃:30sec max. Max time above 217℃ :60sec~150sec max. d﹒Product weight: 0.60g(ref.) e﹒Moisture sensitivity Level 1 Temperature Rising Area f﹒Products comply with RoHS' requirements Preheat Area +4.0℃ / sec max. g﹒Halogen free available 150 ~ 200℃ / 60 ~ 120sec Reflow Area Forced Cooling Area +3.0℃ / sec max. -(1.0 ~ 5.0)℃ / sec max. Peak Temperature: 250℃ 250 Ⅲ﹒General specification: a﹒Storage temp.:-40℃ ----+125℃ b﹒Operating temp.:-40℃----+125℃ Temperature ( ℃ ) 217℃ 60sec~150sec 200 60sec max. 150 60sec~120sec 100 50 (Temp. rise included) c﹒Resistance to solder heat:250℃.10 secs. AR-001C 0 50 100 150 200 250 SPECIFICATION FOR APPROVAL REF. : PROD. NAME DH6038□□□□F□-□□□ ABC'S DWG NO. Shielded SMD Power Inductor REV. 20150824-D PAGE Ⅳ﹒Electrical characteristics: RDC mΩ max. typ. DWG No. Inductance ( μH ) DH60381R0YF□-□□□ 1.0±30 % 9.8 15 5.00 DH60383R0YF□-□□□ 3.0±30 % 15.3 21 3.50 DH60385R0YF□-□□□ 5.0±30 % 18.4 25 2.90 DH60386R8YF□-□□□ 6.8±30 % 22.3 30 2.50 DH60388R2YF□-□□□ 8.2±30 % 26.6 36 2.30 DH6038100MF□-□□□ 10.0±20 % 35.8 50 2.00 DH6038120MF□-□□□ 12.0±20 % 39.7 55 1.70 DH6038150MF□-□□□ 15.0±20 % 42.8 60 1.60 DH6038180MF□-□□□ 18.0±20 % 55.1 75 1.50 DH6038220MF□-□□□ 22.0±20 % 64.7 87 1.30 DH6038270MF□-□□□ 27.0±20 % 76.9 105 1.20 DH6038330MF□-□□□ 33.0±20 % 90.3 120 1.10 DH6038390MF□-□□□ 39.0±20 % 103.0 135 1.00 DH6038470MF□-□□□ 47.0±20 % 123.0 160 0.95 DH6038560MF□-□□□ 56.0±20 % 149.0 190 0.86 DH6038680MF□-□□□ 68.0±20 % 187.0 240 0.75 DH6038820MF□-□□□ 82.0±20 % 220.0 290 0.70 DH6038101MF□-□□□ 100.0±20 % 266.0 345 0.65 1). 2). "- :Packaging information: □□□ ":Reference code Rated current (A) Code 3). Electrical specifications at 25℃ 4). Inductance Test Condition.:10kHz / 1V 5). Rated current: It is either the inductance is 35% lower than its nominal value in D.C. saturation characteristics or temperature raise becomes ΔT=30 °C ref. AR-001C 2 SPECIFICATION FOR APPROVAL REF. : PROD. NAME DH6038□□□□F□-□□□ ABC'S DWG NO. Shielded SMD Power Inductor REV. 20150824-D PAGE Ⅴ﹒Curve: DH60381R0YF□ 1.5 80.0 1.2 60.0 L (uH) △ T (℃ ) 0.9 40.0 0.6 20.0 0.3 0.0 0.0 0.0 2.0 4.0 IDC (A ) 6.0 0.0 8.0 2.0 4.0 6.0 8.0 10.0 3.0 4.0 5.0 IDC (A ) DH6038100MF□ 12.0 100.0 80.0 △ T (℃ ) L (uH) 9.0 6.0 60.0 40.0 3.0 20.0 0.0 0.0 0.0 0.5 1.0 1.5 IDC (A ) 2.0 2.5 3.0 0.0 1.0 2.0 IDC (A ) DH6038330MF□ 100.0 32.0 80.0 24.0 60.0 L (uH) △ T (℃ ) 40.0 16.0 40.0 8.0 20.0 0.0 0.0 0.0 0.5 1.0 IDC (A ) 1.5 2.0 0.0 0.5 1.0 1.5 IDC (A ) 2.0 2.5 3.0 DH6038101MF□ 120.0 100.0 80.0 △ T (℃ ) L (uH) 90.0 60.0 60.0 40.0 30.0 20.0 0.0 0.0 0.0 AR-001C 0.3 0.6 IDC (A ) 0.9 1.2 0.0 0.3 0.6 0.9 IDC (A) 1.2 1.5 3 SPECIFICATION FOR APPROVAL REF. : DH6038□□□□F□-□□□ ABC'S DWG NO. PROD. Shielded SMD Power Inductor NAME REV. 20150824-D PAGE 4 Ⅵ﹒Packaging information: ( 1 ) Configuration T Cover tape N A B 2.0±0.5 ∮C ∮C D G Embossed carrier ※Carrier tape width : D P:12 m/m 4 m/m End Start 330 Leader no component 200 m/m min. 330 330 330 Trailer no component 400 m/m min. Components User direction of feed Unit:m/m ( 2 ) Dimensions Style A 13 - 16 330 B 21±0.8 C D 13±0.5 16 G 18 +0 N 50 -0 T 22.4 ( 3 ) Q'TY & G.W. Per package Inner : Reel Code B AR-001C Q'TY (pcs) G.W. (gw) 1,000 1040 Outer : Carton Style 13 - 16 Q'TY (pcs) G.W. (Kg) Size (cm) 6,000 7.5 38 x 37 x 22 SPECIFICATION FOR APPROVAL REF. : ABC'S DWG NO. PROD. Shielded SMD Power Inductor NAME REV. DH6038□□□□F□-□□□ 20150824-D PAGE 5 Ⅶ﹒Reliability test: Item 1.High Temperature Exposure Reference documents MIL-STD-202 Method 108 2.Temperature Cycling JESD22-A 104 3.Biased Humidity Test MIL-STD-202 Method 103 Test Condition 1.Temperature: 125±2℃ 2.Time:96±2 hours. 1.Temperature: -40℃ ~ +125℃ 2.Number of cycle:100 cycle 3.Dwell time:30 minutes 1.Temperature:85±2 ℃ 2.Humidity: 85% RH. 3.Time:96±2 Hours 1.Temperature: 125℃ (Temp. rise included) 2.Time:96±2 hours. 3.Rated current 4.Operational Life JESD22-A 108 5.External Visual JESD22-B 101 & Inspect product constructions, marking and MIL-STD-883 Method 2009 workmanship. 6.Physical Dimensions JESD22-B 100 7.Resistance to solvents MIL-STD-202 Method 215 Test Specification 1.No mechanical or electrical damage. 2.Inductance shall not change more than ±20%. 1.No mechanical or electrical damage. 2.Inductance shall not change more than ±20%. 1.No mechanical or electrical damage. 2.Inductance shall not change more than ±20%. 1.No mechanical or electrical damage. 2.Inductance shall not change more than ±20%. 1.No pollution on the surface of products. 2.Clear marking. 3.No crack. Verify physical dimensions to the applicable product detail specification. Per product specification standard Immerse into solvent for 3±0.5 minutes & brush 10 times for 3 cycles. 1.No body change in apperarance. 2.No marking blurred. 3.Inductance shall not change more than ±20%. 8.Vibration Test MIL-STD-202 Method 204 9.Resistance To Soldering Heat Test MIL-STD-202 Method 210 & J-STD020D.1 10.Saturation Current JIS C 6436 & User SPEC. 1.Frequency and Amplitued : 10-2000-10 Hz, 1.5 mm. 2.Direction:X, Y, Z 3.Test duration:2 hours for each direction, 6 hours in total. 1.Highest temperature:250±5℃. 2.Time(temp.≧ 217℃):60~150 Second. 3.IR reflow times:3 times. 1.Applied rated current for 5 second. 2.Saturation current 11.Over load JIS C 6436 & User SPEC. 1.Applied one and half rated current for a period of 5 minutes. 2.Rated current No electrical or mechanical damage 12.Temperature Rise Current JIS C 6436 & User SPEC. 1.Applied rated current for 10 minutes. 2.Temperature measure by digital surface thermometer. 3.Irms current Surface temperature rise is less than 30℃ typ. 13.Solderability Test J-STD-002 & JESD22-B 102 1.Baking in pre-testing: 150±5℃ / 16Hours±30 min. 2.Peak temperature:240±5℃ 3.Time(temp.≧217℃):60~150 second. 4.IR reflow times:1 times. More than 95% soldering coverage min on terminations. 14.Electrical Characteriazation MIL-STD-202 Method 304 & User SPEC. 15.Drop 1.Products shall be mounted on SPEC. PCB and dropped down from a height of 1m CNS-C6354 & GB/T 2423.8 2.Drop total time:6 time (Every side of sample drop 2 time) 16.Terminal Strength Test IEC 60068-2-21 AR-001C 1.Operating temperature:-40℃~125℃ 2.Room temperature:25℃. 1.Apply push force to samples mounted on PCB. 2.Force of 1.8 kg for 60±1 seconds. 1.No mechanical or electrical damage. 2.Inductance shall not change more than ±20%. 1.No mechanical or electrical damage. 2.Inductance shall not change more than ±20%. Inductance shall not drop more than 35% typ. 1.No mechanical or electrical damage. 2.Inductance shall not change more than ±20%. 1. Adhesion on PCB shall be enough. 2. Product appearance shall not break. 3. No electrical damage. After test, inductors shall be no mechanical damage.