SPECIFICATION FOR APPROVAL REF. : PROD. NAME SH3016□□□□L□-□□□ ABC'S DWG NO. Shielded SMD Power Inductor REV. 20130123-B PAGE 1 Ⅰ﹒Configuration and dimensions: A C B 6R8 I D G R E I D H LCR Meter ( PCB Pattern ) Unit:m/m A B C D E G H I R 3.80±0.3 3.80±0.3 1.55±0.15 1.30 typ. 1.20 typ. 1.10 ref. 4.30 ref. 1.60 ref. 1.30 ref. Ⅱ﹒Description: a﹒Ferrite drum core construction. b﹒Magnetically shielded. c﹒Enamelled copper wire:F & H class d﹒Product weight: 0.09g(ref.) Peak Temp:260℃ max. Max. Peak Temp - 5℃:30sec max. Max time above 217℃ :60sec~150sec max. e﹒Moisture sensitivity Level 1 Temperature Rising Area f﹒Products comply with RoHS' requirements Preheat Area +4.0℃ / sec max. g﹒Halogen free available 150 ~ 200℃ / 60 ~ 120sec Reflow Area Forced Cooling Area +3.0℃ / sec max. -(1.0 ~ 5.0)℃ / sec max. Peak Temperature: 260℃ 250 Ⅲ﹒General specification: a﹒Storage temp.:-40℃ ----+125℃ b﹒Operating temp.:-40℃----+125℃ (Temp. rise included) Temperature ( ℃ ) 217℃ 60sec~150sec 200 60sec max. 150 60sec~120sec 100 50 c﹒Resistance to solder heat:260℃.10 secs. 0 AR-001C 50 100 150 Time ( seconds ) 200 250 SPECIFICATION FOR APPROVAL REF. : PROD. NAME ABC'S DWG NO. Shielded SMD Power Inductor REV. 20130123-B SH3016□□□□L□-□□□ PAGE Ⅳ﹒Electrical characteristics: Inductance ( μH ) RDC (mΩ) max. IDC (mA) typ. SH30161R5YL□-□□□ 1.5 ±30% 45.0 1450.0 SH30162R5YL□-□□□ 2.5±30% 65.0 1150.0 SH30163R6YL□-□□□ 3.6 ±30% 90.0 900.0 SH30164R7YL□-□□□ 4.7 ±30% 120.0 800.0 SH30166R8YL□-□□□ 6.8 ±30% 170.0 660.0 SH3016100YL□-□□□ 10.0 ±30% 240.0 520.0 SH3016150YL□-□□□ 15.0 ±30% 340.0 430.0 SH3016220YL□-□□□ 22.0 ±30% 510.0 360.0 SH3016330YL□-□□□ 33.0 ±30% 780.0 290.0 SH3016470YL□-□□□ 47.0 ±30% 1200.0 230.0 SH3016680YL□-□□□ 68.0 ±30% 1800.0 200.0 SH3016101YL□-□□□ 100.0 ±30% 2400.0 160.0 DWG No. 1). :Packaging information: Code 2). "":Reference code 3). Electrical specifications at 25℃ 4). Inductance test freq. : 100KHz / 0.1V 5). Irms Base on temp rise 30℃ max. 6). Isat Base on △L/L0A=35% typ. □□□ AR-001C 2 SPECIFICATION FOR APPROVAL REF. : SH3016□□□□L□-□□□ ABC'S DWG NO. PROD. Shielded SMD Power Inductor NAME REV. 20130123-B PAGE 3 Ⅴ﹒Packaging information: ( 1 ) Configuration T Cover tape N B A 2.0±0.5 ∮C ∮C D G Embossed carrier ※Carrier tape width : D 4 m/m P:8 m/m Start End 6R8 Leadr no component 200 m/m min. 6R8 6R8 6R8 Trailer no component 400 m/m min. Components User direction of feed ( 2 ) Dimensions Unit:m/m Style A 07 - 12 178 B 21±0.8 C D 13 12 G 14 +0 N 50 -0 T 16.5 ( 3 ) Q'TY & G.W. Per package Inner : Reel Code B AR-001C Outer : Carton Q'TY (pcs) G.W. (gw) Style Q'TY (pcs) G.W. (Kg) Size (cm) 1,000 150 07 - 12 40,000 8.50 42 x 41 x 24 SPECIFICATION FOR APPROVAL REF. : SH3016□□□□L□-□□□ ABC'S DWG NO. PROD. Shielded SMD Power Inductor NAME REV. 20130123-B PAGE 4 Ⅵ﹒Reliability test: Item 1.High Temperature Exposure Reference documents MIL-STD-202 Method 108 Test Condition 1.Temperature: 125℃ 2.Time:96 hours. 1.Temperature: -40℃ ~ 125℃ 2.Temperature Cycling JESD22 Method JA-104 2.Number of cycle:96 cycle 3.Dwell time:30 minutes 3.Biased Humidity Test MIL-STD-202 Method 103 1.Temperature: 85±5 ℃ 2.Time:96 Hours 3.Humidity: 85±5% RH. 1.Temperature: 125℃ 2.Time:96 hours. 3.Apply rated current. 4.Operational Life MIL-PRF-27 5.Exeternal Visual MIL-STD-883 Method 2009 constructions, marking and Inspect product workmanship. Test Specification 1.No mechanical and electrical damage. 2.Inductance shall not change more than ±20%. 1.No mechanical and electrical damage. 2.Inductance shall not change more than ±20%. 1.No mechanical and electrical damage. 2.Inductance shall not change more than ±20%. 1.No mechanical and electrical damage. 2.Inductance shall not change more than ±20%. 1.No pollution on the surface of products. 2.Clear marking. 3.No crack. 6.Physical Dimensions JESD22 Method JB-100 Verify physical dimensions to the applicable product detail specification. Per product specification standard 7.Resistance to solvents MIL-STD-202 Method 215 Immerse into solvent for 3±0.5 minutes & brush 10 times for therr cycles. 1.No body change in apperarance. 2.No marking blurred. 3.Inductance shall not change more than ±20%. 8.Vibration Test MIL-STD-202 Method 204 1.Frequency and Amplitued : 10-2000-10 Hz, 1.5 mm. 2.Direction:X, Y, Z 3.Test duration:2 hours for each direction, 6 hours in total. 1.No mechanical and electrical damage. 2.Inductance shall not change more than ±20%. 9.Resistance To Soldering Heat Test MIL-STD-202 Method 210 1.Highest temperature: 260±5℃ 2.Time(temp.≧ 217℃):60~150 Second. 3.IR reflow times:3 times. 10.Rated current MIL-STD-202 Method 330 11.Temperature rise MIL-PRF-27 12.Over load MIL-PRF-27 1.No mechanical and electrical damage. 2.Inductance shall not change more than ±20%. 1.No mechanical and electrical damage. Apply rated current for 5 second. 2.Inductance shall not change more than ±20%. 1.No mechanical and electrical damage. Apply rated current for 10 minutes. 2.Inductance shall not change more than ±20%. 1.No mechanical and electrical damage. Apply twice as rated current for 5 minutes. (It's not application to some special design) 2.Inductance shall not change more than ±20%. 1.Baking in pre-testing: 155±5℃ / 16Hours±30 min. 2.Peak temperature:240±5℃ 3.Time(temp.≧217℃):60~150 second. 4.IR reflow times:1 times. The terminal shall be at least 95% covered with fresh solder. User Spec. 1.Operating temperature: -40℃~125℃ 2.Room temperature:25℃. 1.No mechanical and electrical damage. 2.Inductance shall not change more than ±20%. MIL-STD-202 Method 201 1.DV:500V 2.Time:1minutes 16.Drop JESD22-B111 Packaged & Drop down from 1m.In 1 angle 1ridges & 2 surfaces orientation. 17.Terminal Strength Test JIS-C-6429 1.Apply push force to samples mounted on PCB. 2.Force of 1.8 kg for 60±1 seconds. 13.Solderability Test 14.Electrical Characteriazation 15.Withstanding Voltage Test AR-001C J-STD-002 1.During the test no breakdown. 2.The characteristic is normal after test. 1.No case deformation or change in appearance. 2.Inductance shall not change more than ±20%. After test, inductors shall be no mechanical damage.