3M Housings HF Series For Cartridge Filters The HF housings are constructed from 316 L or 304 stainless steel and manufactured in accordance to design and construction code EN13445 Group 3. They have a maximum pressure rating design of 10 bar g and can be used in temperatures up to 90 ºC. The HF housings are fully CE marked in accordance with the European Pressure Equipment Directive (PED) and are available in a variety of sizes to accommodate 1, 3, 5 or 7 cartridges, in either of two lengths - 40 inch and 60 inch. Pressure Equipment Directive 97/23/CE HF vessels are built to PED 97/23/CE Category 3.3 “Sound Engineering Practice” as standard. The vessel designs have been developed so that they can be manufactured for the highest demanding applications - Group 1 (Hazardous Gas) - upon request from existing and known production documentation. All dimensions remain as shown here. ATEX Directive 94/9/CE The HF housings are not ATEX approved as standard. They can be approved for use in ATEX condition 11/2/G/T5 upon request. The user of these housings must ensure that they are used in accordance with the requirements of these PED and ATEX directives at all times. Please consult your local 3M Purification representative for any other classification or further information. Table 1: Housing Specifications Materials of Construction 316L (1.4404 or equivalent) or 304 (1.4307 or equivalent) This applies to materials in contact with the product. Other non contact items (including bolts etc.) may vary from this. Pressure Equipment Directive PED 97/23/CE for Group 1 and Group 2 fluids. 97/23/CE Operating Conditions Restrictions will apply for gas or vapour applications. Please refer to 3M Purification for specific cases. ATEX 94/9/CE Group II Category 2 – T5 (Other ratings are possible, please refer to 3M Purification) Recommended Maximum Flow per Cartridge: m³/hour For 40 inch 80 m³/hour and for 60 inch 113 m³/hour (60” elements are available in horizontal vessel configuration only) Applications Industrial • Municipal Water, RO Prefiltration, Reclaimed Water, Coolants, Nozzle Protection, Boiler Condensate Chemical • Quench Water, Aqueous Salt Solutions, Final Products Petrochemicals • Waterflooding, Produced Water, Enhanced Oil Recovery, Completion Fluids, Amine Sweetening, Final Products Features & Benefits Electronics • RO Prefiltration, Process Water Compact design • Smaller housing minimizes capital expense requirements • Reduces system footprint Food & Beverage • Process Water Robust cartridge centre-post design • Eliminates bulky support plates providing easy access to housing internals Manufactured from 304 or 316L stainless steel • Excellent corrosion protection (carbon steel option available in multi-element housing) Upstream and downstream gauge ports and drains Hinged cover (horizontal housings) and user-friendly cover lifting device (vertical housings) • For easy element change-outs Pharmaceutical • Process Water Table 2: Other Specifications Nominal Model Diameter Material (mm) 1HF 219 3HF 450 5HF 500 7HF 600 Inlet & Outlet Connection (DIN) 40” Recommended Maximum Flow m³/hr* 60” 40” 316L DN100 DN100 80 or 304L DN150 DN200 198** Stainless Steel DN200 DN250 352** DN250 DN300 556 60” Maximum Pressure & Temperature 113 Vent & Drain Connections Vent Drain 1/4” *** 1/2” *** 339 10 bar at 90 ºC 556** 1/2” 1” 1/2” 1” 1” 2” 791 * Pressure drop across cartridge not included (see figure 3) ** Maximum flow rate based on nozzle size *** Only for Vertical Housings and with plug Figure 1: Typical Housing Flow Rates 60 5HF 40 5HF 3HF40 3HF 6 0 1HF40 1HF60 700 7H F40 600 0 F6 7H Differential Pressure (mbar) 500 400 300 200 100 0 0 200 400 600 800 Flow Rate (m³/hr) Table 3: Dimensions in mm Vertical Housing Models (available for 40” cartridges only) A Floor to Inlet B Total Height C Outlet to Floor H Clearance 01HFB1V 6801 18731 4301 28601 03HFB1V 1010 2715 400 3500 05HFB1V 1115 2815 500 3600 07HFB1V 1210 2995 600 3700 Model Horizontal Housing Models A Top to Inlet C Top to Vent E Inlet to Floor H Middle to Floor L Total Length 01HFB1H 1170 - 614 814 14251 01HFB2H 1680 - 614 814 19351 03HFB1H 1340 1510 500 810 1950 03HFB2H 1850 2020 500 810 2500 05HFB1H 1340 1510 550 900 1950 05HFB2H 1850 2020 550 900 2500 07HFB1H 1340 1510 650 1060 1950 07HFB2H 1850 2020 650 1060 2500 Model Note: All Dimensions approximately for guidance only 1 Maximum height 2 3M Housings HF Series For Cartridge Filters Figure 2: HF Horizontal Housings HF Multi Element Housing HF Single Element Housing HF Multi Element Housing Figure 3: HF Vertical Housings HF Multi Element Housing HF Single Element Housing HF Multi Element Housing 3 3M Housings HF Series For Cartridge Filters Ordering Guide HF Series Housings Number of Filter Elements Model Closing Size * Configuration Housing Material Gasket Material ** Surface Finish Connections *** 01 03 05 07 HF B = Bolted 1 = 40” 2 = 60” H = Horizontal V = Vertical 4 = 304L 6 = 316L NB = Nitrile F0 = Acid Pickled & Passivated or Glass Bead Blasted BP = Flanged (ISO PN 16) Outlet D = Bottom Outlet Elbow N = None * 60” Elements are available for horizontal housings only ** For other Gasket Materials or spare parts, please contact a 3M Purification representative *** Flange size will vary with number of filter elements and element length (refer to table 2 on page 2) Examples: 03 HFB 2 H 6 NB F0 BP D N or 05 HFB 1 V 6 NB F0 BP D N Important Notice 3M Purification MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Since a variety of factors can affect the use and performance of a 3M Purification product in a particular application, some of which are uniquely within the user’s knowledge and control, user is responsible for determining whether or not the 3M Purification product is fit for a particular purpose and suitable for user’s method of application. Limited Warranty 3M Purification warrants it this product to be free from defects in material and workmanship during normal use for a period of one (1) year from the date of shipment from the factory. If the Product(s) is (are) defective within this warranty period, your exclusive remedy and 3M Purification’s sold obligations shall be, at 3M Purification’s option, to replace or repair the Product(s) or refund the original purchase price of the Product(s) This warranty does not apply to failures that result from abuse, misuse, alternation or damage not caused by 3M Purification or failure to properly follow installation and use instructions. Limitation of Liability: 3M Purification will not be liable for any loss or damage arising from the use of the Product(s), whether direct, indirect, special, incidental, or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may have other rights which vary from state to state, or country to country. 3M United Kingdom plc 3M Purification 3M Centre, Cain Road Bracknell, RG12 8HT United Kingdom Tel.: 0845 602 5237 Fax: +44 (0)1344 858559 E-mail: [email protected] For more contact addresses visit our website www.3M.eu/filtration or www.3Mpurification.com/international. Data may be subject to change without further notice. © 3M 2010. All rights reserved. DOC10001 LITHSHF1.EU - 0710