Crane Aerospace & Electronics Microwave Solutions BROADBAND DOUBLE BALANCED MIXERS FEATURES Broad Frequency Coverage Low Conversion Loss High Isolation Drop-In or Connectorized Hermetic Packages Storage Temp -65°C to +125°C Operating Temp -54°C to +100°C PERFORMANCE/SPECIFICATIONS @ +25°C RF/LO Frequency (GHz) Model Number 4.0 – 20.0 STDB-2005 2.0 – 8.0 Isolation Conversion Loss (dB) (Typ./Max.) L-R DC - 4.0 5.5/7.0 6.0/7.5 43/30 40/25 STDB-2006 DC - 2.0 5.5/7.0 6.0/7.5 2.0 – 12.0 STDB-2007 DC - 2.0 6.0 – 18.0 STDB-2008 8.0 – 14.0 10.0 – 26.5 IF Frequency (GHz) Conditions Frequency (GHz) Package Style 30/22 30/20 RF/LO 6.0 – 18.0 RF/LO 4.0 – 20.0 I, M 37/28 37/28 31/20 31/20 RF/LO 3.0 – 7.0 RF/LO 2.0 – 8.0 I 6.0/7.5 6.5/8.0 35/25 35/25 30/20 30/20 RF/LO 4.0 – 10.0 RF/LO 2.0 – 12.0 I DC - 4.0 5.0/6.5 5.5/7.0 44/30 40/30 35/25 35/25 RF/LO 8.0 – 16.0 RF/LO 6.0 – 18.0 I, M STDB-2009 DC - 4.0 4.5/6.0 5.0/6.5 45/35 45/30 35/25 35/25 RF/LO 9.0 – 13.0 RF/LO 8.0 – 14.0 I, M STDB-2010 DC - 4.0 6.0/7.5 6.5/8.0 35/25 35/25 30/20 30/20 RF/LO 12.0 – 24.0 RF/LO 10.0 – 26.5 I, M Model Number Designation Model STDB-2005 – I L C C for SMA Female Connectors Local Oscillator Power Package Style Double Balanced Design L-I (Typ./Min.) Local Oscillator Power Options L Version +7 dBm (Typ 1 dB Input Compression Point +1 dBm) M Version +10 dBm (Typ 1 dB Input Compression Point +4 dBm) H Version +13 dBm (Typ 1 dB Input Compression Point +7 dBm) Custom frequency bands, packages and higher power levels are available. Crane Aerospace & Electronics Microwave Solutions – Signal Technology 340 North Roosevelt Avenue, Chandler, AZ 85226 +1.480.961.6269 [email protected] www.craneae.com/mw Page 1 of 3 Crane Aerospace & Electronics Microwave Solutions BROADBAND DOUBLE BALANCED MIXERS TYPICAL PERFORMANCE +25° MODEL STDB-2005 MODEL STDB-2006 www.craneae.com/mw Page 2 of 3 Crane Aerospace & Electronics Microwave Solutions BROADBAND DOUBLE BALANCED MIXERS TYPICAL PERFORMANCE +25° MODEL STDB-2005 STANDARD OUTLINES TYPICAL PERFORMANCE – SINGLE TONE INTERMODULATION PRODUCTS Test Conditions RF = 6 – 10 GHz @ -10 dBm LO = 6 GHz @ -10 dBm IF = DC – 4 GHz RF = 9.6 – 13 GHz @ -10 dBm LO = 13.5 GHz @ +10 dBm IF = 0.5 – 4 GHz IF IN = 1.5 – 4 GHz @ -10 dBm LO = 11 GHz @ = 10 dBm RF OUT = 7 – 9 GHz dBc = dB BELOW DESIRED OUTPUT SIGNAL LEVEL IM Product 2L-R 2R-2L 3L-2R 3R-3L 2R-3L 4L-2R 4R-4L 2L-2R 3R-2L 3L-3R 3L-4R 4L-4R L-2I L-3I 2I 3I 4I 2L-4I DS_Broadband Double Balanced Mixers_MW_050613A.doc. This revision supersedes all previous releases. All technical information is believed to be accurate, but no responsibility is assumed for errors. We reserve the right to make changes in products or specifications without notice. Copyright © 2013 Crane Electronics, Inc. All rights reserved. www.craneae.com/mw Page 3 of 3 IM Level, DBC 32 48 49 54 51 53 >70 54 58 56 >70 >70 55 60 50 >70 >70 >70