FiltersSection - 2010:FiltersSection - 2010 8/6/10 16:56 Page 131 Mains Filters Designed to reduce conducted mains borne EMI, this extensive range provides many solutions to EMI problems. To meet individual design requirements the filters are available with two attenuation options – standard and medical. Current ratings are from 1 to 10 amps with single or twin fused types also available. IEC CONNECTORS The choice of mounting options will suit most applications with flange, snap to panel or base/bulkhead. Type Page Flange and Snap Fit PS00 Series PS01 Series 132-135 132-135 Base Mounting and Bulkhead PS02 Series PS03 Series 136-139 139-139 Fused Inlets PS20 Series PS21 Series PS25 Series PS26 Series 140-141 140-141 142-145 142-145 www.elektron-bulgin.com 131 FiltersSection - 2010:FiltersSection - 2010 8/6/10 16:56 Page 132 MAINS FILTERS IEC Power Inlets Flange and Snap Fit PANEL MOUNTING ᔢ 1, 3, 6 or 10 Amp Current Rating ᔢ 3 Alternative Circuits ᔢ Optional Additional Components ᔢ 2.8 or 6.3mm tabs Flange PS00/A SNAP FIT Snap Fit PS01/A ᔢ 1, 3, 6 or 10 Amp Current Rating ᔢ 3 Alternative Circuits ᔢ Optional Additional Components ᔢ 2.8 or 6.3mm tabs ᔢ 1, 1.5, 2 or 3mm panels IEC CONNECTORS PS00 or PS01/Axx x x /xx xx Series Rating L/C Circuit Additional Components Tag Type and Configuration Panel Thickness PS00/A 01 = 1A 1 = Version 1 0 = None 28 = 2.8mm 00 = Flange PS01/A 03 = 3A 2 = Version 2 1 = Bleed (R) Resistor 63 = 6.3mm tabs 10 = 1.0mm 06 = 6A 3 = Version 3 2 = Surge (VDR) Protection 15 = 1.5mm 3 = “R” plus “VDR” 20 = 2.0mm 10 = 10A 30 = 3.0mm Specification PS00/Axxxx/xx00 PS01/Axxxx/xxxx Part No. Example Max. Working Voltage: 250V a.c. 50-400Hz 250V a.c. 50-400Hz PS00/A0120/6300 = Earth Leakage Current: <0.35mA (250V, 50Hz) <0.35mA (250V, 50Hz) Temperature Range: –25ºC to +85ºC –25ºC to +85ºC Max. Ambient Temp.: (@ Full Load) 40ºC (derate linearly to 0A @ 85ºC) 40ºC (derate linearly to 0A @ 85ºC) Test Voltage: 2700V d.c. 2 secs. Lines to Earth 1100V d.c. 2 secs. Live to Neutral 2700V d.c. 2 secs. Lines to Earth 1100V d.c. 2 secs. Live to Neutral PS00 series, flange fitting, standard filtered IEC power inlet, rated at 1 ampere. L/C circuit version 2, i.e. L1 = 2 x 10mH, Cx = 15nF, Cy = 2 x 2.2nF, without bleed resistor or surge protection device fitted, with 6.3mm tabs. PX0587, PX0587/SE, PX0588 PX0587, PX0587/SE, PX0588 Compliant Compliant Approvals: Mating Connectors: RoHS 132 www.elektron-bulgin.com FiltersSection - 2010:FiltersSection - 2010 8/6/10 16:56 Page 133 MAINS FILTERS Rating Version L1 Cx Cy 1 AMP “ “ 1 2 3 2 x 2.8mH 2 x 10mH 2 x 10mH 1 x 15nF 1 x 15nF 1 x 47nF 2 x 2.2nF 2 x 2.2nF 2 x 2.2nF 3 AMP “ “ 1 2 3 2 x 0.75mH 2 x 1.8mH 2 x 1.8mH 1 x 15nF 1 x 15nF 1 x 47nF 2 x 2.2nF 2 x 2.2nF 2 x 2.2nF 6 AMP “ “ 1 2 3 2 x 0.3mH 2 x 0.7mH 2 x 0.7mH 1 x 15nF 1 x 15nF 1 x 47nF 2 x 2.2nF 2 x 2.2nF 2 x 2.2nF 10 AMP “ “ 1 2 3 2 x 0.17mH 2 x 0.35mH 2 x 0.17mH 1 x 15nF 1 x 15nF 1 x 47nF 2 x 2.2nF 2 x 2.2nF 2 x 2.2nF Version 1 Version 2 Version 3 PS00/A011x/xxxx PS01/A011x/xxxx PS00/A012x/xxxx PS01/A012x/xxxx PS00/A013x/xxxx PS01/A013x/xxxx PS00/A031x/xxxx PS01/A031x/xxxx PS00/A032x/xxxx PS01/A032x/xxxx PS00/A033x/xxxx PS01/A033x/xxxx PS00/A061x/xxxx PS01/A061x/xxxx PS00/A062x/xxxx PS01/A062x/xxxx PS00/A063x/xxxx PS01/A063x/xxxx PS00/A101x/xxxx PS01/A101x/xxxx PS00/A102x/xxxx PS01/A102x/xxxx PS00/A103x/xxxx PS01/A103x/xxxx www.elektron-bulgin.com IEC CONNECTORS Rating & Version Table PS00/Axxxx/xx00 & PS01/Axxxx/xxxx 133 FiltersSection - 2010:FiltersSection - 2010 8/6/10 16:56 Page 134 MAINS FILTERS Medical IEC Power Inlets Flange and Snap Fit PANEL MOUNTING Flange PS00/B ᔢ 1, 3, 6 or 10 Amp Current Rating ᔢ Medical ᔢ 3 Alternative Circuits ᔢ Optional Additional Components ᔢ 2.8 or 6.3mm tabs SNAP FIT Snap Fit PS01/B ᔢ 1, 3, 6 or 10 Amp Current Rating ᔢ Medical ᔢ 3 Alternative Circuits ᔢ Optional Additional Components ᔢ 2.8 or 6.3mm tabs ᔢ 1, 1.5, 2 or 3mm panels IEC CONNECTORS PS00 or PS01/Bxx x x /xx xx Series Rating L/C Circuit Additional Components Tag Type and Configuration Panel Thickness PS00/B 01 = 1A 1 = Version 1 0 = None 28 = 2.8mm 00 = Flange PS01/B 03 = 3A 2 = Version 2 1 = Bleed (R) Resistor 63 = 6.3mm tabs 10 = 1.0mm 06 = 6A 3 = Version 3 2 = Surge (VDR) Protection 15 = 1.5mm 3 = “R” plus “VDR” 20 = 2.0mm 10 = 10A 30 = 3.0mm Specification PS00/Bxxxx/xx00 PS01/Bxxxx/xxxx Part No. Example Max. Working Voltage: 250V a.c. 50-400Hz 250V a.c. 50-400Hz PS00/B0120/6300 = Earth Leakage Current: <100µA (typically 5µA 250V, 50Hz) <100µA (typically 5µA 250V, 50Hz) Temperature Range: –25ºC to +85ºC –25ºC to +85ºC Max. Ambient Temp.: (@ Full Load) 40ºC (derate linearly to 0A @ 85ºC) 40ºC (derate linearly to 0A @ 85ºC) Test Voltage: 2700V d.c. 2 secs. Lines to Earth 1100V d.c. 2 secs. Live to Neutral 2700V d.c. 2 secs. Lines to Earth 1100V d.c. 2 secs. Live to Neutral PS00 series, flange fitting, filtered IEC power inlet, for medical applications, rated at 1 ampere. L/C circuit version 2, i.e. L1 = 2 x 10mH, Cx = 15nF, without bleed resistor or surge protection device fitted, with 6.3mm tabs. PX0587, PX0587/SE, PX0588 PX0587, PX0587/SE, PX0588 Compliant Compliant Approvals: Mating Connectors: RoHS 134 www.elektron-bulgin.com FiltersSection - 2010:FiltersSection - 2010 8/6/10 16:56 Page 135 MAINS FILTERS Rating Version L1 Cx 1 AMP “ “ 1 2 3 2 x 2.8mH 2 x 10mH 2 x 10mH 1 x 15nF 1 x 15nF 1 x 47nF 3 AMP “ “ 1 2 3 2 x 0.75mH 2 x 1.8mH 2 x 1.8mH 1 x 15nF 1 x 15nF 1 x 47nF 6 AMP “ “ 1 2 3 2 x 0.3mH 2 x 0.7mH 2 x 0.7mH 1 x 15nF 1 x 15nF 1 x 47nF 10 AMP “ “ 1 2 3 2 x 0.17mH 2 x 0.35mH 2 x 0.17mH 1 x 15nF 1 x 15nF 1 x 47nF Version 1 Version 2 Version 3 PS00/B011x/xxxx PS01/B011x/xxxx PS00/B012x/xxxx PS01/B012x/xxxx PS00/B013x/xxxx PS01/B013x/xxxx PS00/B031x/xxxx PS01/B031x/xxxx PS00/B032x/xxxx PS01/B032x/xxxx PS00/B033x/xxxx PS01/B033x/xxxx PS00/B061x/xxxx PS01/B061x/xxxx PS00/B062x/xxxx PS01/B062x/xxxx PS00/B063x/xxxx PS01/B063x/xxxx PS00/B101x/xxxx PS01/B101x/xxxx PS00/B102x/xxxx PS01/B102x/xxxx PS00/B103x/xxxx PS01/B103x/xxxx www.elektron-bulgin.com IEC CONNECTORS Rating & Version Table PS00/Bxxxx/xx00 & PS01/Bxxxx/xxxx 135 FiltersSection - 2010:FiltersSection - 2010 8/6/10 16:57 Page 136 MAINS FILTERS Base Mounting and Bulkhead BASE MOUNTING ᔢ 1, 3, 6 or 10 Amp Current Rating ᔢ 3 Alternative Circuits ᔢ Optional Additional Components ᔢ 2.8 or 6.3mm tabs Base Mounting PS02/A BULKHEAD MOUNTING ᔢ 1, 3, 6 or 10 Amp Current Rating ᔢ 3 Alternative Circuits ᔢ Optional Additional Components ᔢ 2.8 or 6.3mm tabs Bulkhead Mounting PS03/A IEC CONNECTORS PS02 or PS03/Axx x x /xx Series Rating L/C Circuit Additional Components Tag Type and Configuration PS02/A 01 = 1A 1 = Version 1 0 = None 28 = 2.8mm PS03/A 03 = 3A 2 = Version 2 1 = Bleed (R) Resistor 63 = 6.3mm tabs 06 = 6A 3 = Version 3 2 = Surge (VDR) Protection 10 = 10A 3 = “R” plus “VDR” Specification PS02/Axxxx/xx PS03/Axxxx/xx Part No. Example Max. Working Voltage: 250V a.c. 50-400Hz 250V a.c. 50-400Hz PS02/A0311/28 = Earth Leakage Current: <0.35mA (250V, 50Hz) <0.35mA (250V, 50Hz) Temperature Range: –25ºC to +85ºC –25ºC to +85ºC Max. Ambient Temp.: (@ Full Load) 40ºC (derate linearly to 0A @ 85ºC) 40ºC (derate linearly to 0A @ 85ºC) PS02 series, standard base mounting filter, rated at 3 amperes. L/C circuit version 1, i.e. L1 = 2 x 0.75mH, Cx = 15nF, Cy = 2 x 2.2nF. with bleed resistor fitted, with 2.8mm tabs. Test Voltage: 2700V d.c. 2 secs. Lines to Earth 1100V d.c. 2 secs. Live to Neutral 2700V d.c. 2 secs. Lines to Earth 1100V d.c. 2 secs. Live to Neutral Compliant Compliant Approvals: RoHS 136 www.elektron-bulgin.com FiltersSection - 2010:FiltersSection - 2010 8/6/10 16:57 Page 137 MAINS FILTERS Rating Version L1 Cx Cy 1 AMP “ “ 1 2 3 2 x 2.8mH 2 x 10mH 2 x 10mH 1 x 15nF 1 x 15nF 1 x 47nF 2 x 2.2nF 2 x 2.2nF 2 x 2.2nF 3 AMP “ “ 1 2 3 2 x 0.75mH 2 x 1.8mH 2 x 1.8mH 1 x 15nF 1 x 15nF 1 x 47nF 2 x 2.2nF 2 x 2.2nF 2 x 2.2nF 6 AMP “ “ 1 2 3 2 x 0.3mH 2 x 0.7mH 2 x 0.7mH 1 x 15nF 1 x 15nF 1 x 47nF 2 x 2.2nF 2 x 2.2nF 2 x 2.2nF 10 AMP “ “ 1 2 3 2 x 0.17mH 2 x 0.35mH 2 x 0.17mH 1 x 15nF 1 x 15nF 1 x 47nF 2 x 2.2nF 2 x 2.2nF 2 x 2.2nF Version 1 Version 2 Version 3 PS02/A011x/xxxx PS03/A011x/xxxx PS02/A012x/xxxx PS03/A012x/xxxx PS02/A013x/xxxx PS03/A013x/xxxx PS02/A031x/xxxx PS03/A031x/xxxx PS02/A032x/xxxx PS03/A032x/xxxx PS02/A033x/xxxx PS03/A033x/xxxx PS02/A061x/xxxx PS03/A061x/xxxx PS02/A062x/xxxx PS03/A062x/xxxx PS02/A063x/xxxx PS03/A063x/xxxx PS02/A101x/xxxx PS03/A101x/xxxx PS02/A102x/xxxx PS03/A102x/xxxx PS02/A103x/xxxx PS03/A103x/xxxx www.elektron-bulgin.com IEC CONNECTORS Rating & Version Table PS02/Axxxx/xx & PS03/Axxxx/xx 137 FiltersSection - 2010:FiltersSection - 2010 8/6/10 16:57 Page 138 MAINS FILTERS Medical Base Mounting and Bulkhead BASE MOUNTING Base Mounting PS02/B ᔢ 1, 3, 6 or 10 Amp Current Rating ᔢ Medical ᔢ 3 Alternative Circuits ᔢ Optional Additional Components ᔢ 2.8 or 6.3mm tabs BULKHEAD MOUNTING Bulkhead Mounting PS03/B ᔢ 1, 3, 6 or 10 Amp Current Rating ᔢ Medical ᔢ 3 Alternative Circuits ᔢ Optional Additional Components ᔢ 2.8 or 6.3mm tabs IEC CONNECTORS PS02 or PS03/Bxx x x /xx Series Rating L/C Circuit Additional Components Tag Type and Configuration PS02/B 01 = 1A 1 = Version 1 0 = None 28 = 2.8mm PS03/B 03 = 3A 2 = Version 2 1 = Bleed (R) Resistor 63 = 6.3mm tabs 06 = 6A 3 = Version 3 2 = Surge (VDR) Protection 10 = 10A 3 = “R” plus “VDR” Specification PS02/Bxxxx/xx PS03/Bxxxx/xx Part No. Example Max. Working Voltage: 250V a.c. 50-400Hz 250V a.c. 50-400Hz PS03/B0630/63 = Earth Leakage Current: <100µA (typically 5µA 250V, 50Hz) <100µA (typically 5µA 250, 50Hz) Temperature Range: –25ºC to +85ºC –25ºC to +85ºC Max. Ambient Temp.: (@ Full Load) 40ºC (derate linearly to 0A @ 85ºC) 40ºC (derate linearly to 0A @ 85ºC) Test Voltage: 2700V d.c. 2 secs. Lines to Earth 1100V d.c. 2 secs. Live to Neutral 2700V d.c. 2 secs. Lines to Earth 1100V d.c. 2 secs. Live to Neutral PS03 series, bulkhead mounting for medical applications, rated at 6 amperes. L/C circuit version 3, i.e. L1 = 2 x 0.7mH, Cx = 47nF, without bleed resistor or surge protection device fitted, with 6.3mm tabs. Compliant Compliant Approvals: RoHS 138 www.elektron-bulgin.com FiltersSection - 2010:FiltersSection - 2010 8/6/10 16:57 Page 139 MAINS FILTERS Rating Version L1 Cx 1 AMP “ “ 1 2 3 2 x 2.8mH 2 x 10mH 2 x 10mH 1 x 15nF 1 x 15nF 1 x 47nF 3 AMP “ “ 1 2 3 2 x 0.75mH 2 x 1.8mH 2 x 1.8mH 1 x 15nF 1 x 15nF 1 x 47nF 6 AMP “ “ 1 2 3 2 x 0.3mH 2 x 0.7mH 2 x 0.7mH 1 x 15nF 1 x 15nF 1 x 47nF 10 AMP “ “ 1 2 3 2 x 0.17mH 2 x 0.35mH 2 x 0.17mH 1 x 15nF 1 x 15nF 1 x 47nF Version 1 Version 2 Version 3 PS02/B011x/xxxx PS03/B011x/xxxx PS02/B012x/xxxx PS03/B012x/xxxx PS02/B013x/xxxx PS03/B013x/xxxx PS02/B031x/xxxx PS03/B031x/xxxx PS02/B032x/xxxx PS03/B032x/xxxx PS02/B033x/xxxx PS03/B033x/xxxx PS02/B061x/xxxx PS03/B061x/xxxx PS02/B062x/xxxx PS03/B062x/xxxx PS02/B063x/xxxx PS03/B063x/xxxx PS02/B101x/xxxx PS03/B101x/xxxx PS02/B102x/xxxx PS03/B102x/xxxx PS02/B103x/xxxx PS03/B103x/xxxx www.elektron-bulgin.com IEC CONNECTORS Rating & Version Table PS02/Bxxxx/xx & PS03/Bxxxx/xx 139 FiltersSection - 2010:FiltersSection - 2010 8/6/10 16:57 Page 140 MAINS FILTERS IEC Power Inlets (Single Fused) PANEL MOUNTING ᔢ 1, 3, or 6 Amp Current Rating ᔢ Single Fused ᔢ 2 Alternative Circuits ᔢ 2.8 or 6.3mm tabs PS20/A SNAP FIT ᔢ 1, 3, or 6 Amp Current Rating ᔢ Single Fused ᔢ 2 Alternative Circuits ᔢ 2.8 or 6.3mm tabs ᔢ 1, 1.5, 2 or 3mm panels PS21/A IEC CONNECTORS PS20 or PS21/Axx x x /xx xx Series Rating L/C Circuit Additional Components Tag Type and Configuration Panel Thickness PS20/A 01 = 1A 3 = Version 3 0 = None 28 = 2.8mm Blank = Flange PS21/A 03 = 3A 2 = Version 2 63 = 6.3mm tabs 10 = 1.0mm 06 = 6A 3 = Version 3 15 = 1.5mm 20 = 2.0mm 30 = 3.0mm Specification PS20/Axxx0/xx00 PS21/Axxx0/xxxx Part No. Example Max. Working Voltage: 250V a.c. 50-400Hz 250V a.c. 50-400Hz PS20/A0620/63 = Earth Leakage Current: <0.35mA (250V, 50Hz) <0.35mA (250V, 50Hz) Temperature Range: –25ºC to +85ºC –25ºC to +85ºC Max. Ambient Temp.: (@ Full Load) 40ºC (derate linearly to 0A @ 85ºC) 40ºC (derate linearly to 0A @ 85ºC) Test Voltage: 2700V d.c. 2 secs. Lines to Earth 1100V d.c. 2 secs. Live to Neutral 2700V d.c. 2 secs. Lines to Earth 1100V d.c. 2 secs. Live to Neutral PS20 series, flange fitting, standard filtered IEC power inlet, single fused, rated at 6 amperes. L/C circuit version 2, i.e L1 = 2 x 0.7mH, Cx = 1 x 15nF, Cy = 2 x 2.2nF. Without bleed resistor or surge protection device fitted, with 6.3mm tabs. Mating Connectors: PX0587, PX0587/SE, PX0588 PX0587, PX0587/SE, PX0588 Accessories: P.No. 14340 (see page 96) P.No. 14340 (see page 96) Compliant Compliant Approvals: RoHS 140 www.elektron-bulgin.com FiltersSection - 2010:FiltersSection - 2010 8/6/10 16:57 Page 141 MAINS FILTERS Rating & Version Table PS20/Axxx0/xx00 & PS21/Axxx0/xxxx Rating Version L1 Cx Cy 1 AMP “ “ 1 2 3 2 x 10mH 1 x 47nF 2 x 2.2nF 3 AMP “ “ 1 2 3 2 x 1.8mH 2 x 6.5mH 1 x 15nF 1 x 47nF 2 x 2.2nF 2 x 2.2nF 6 AMP “ “ 1 2 3 2 x 0.7mH 2 x 2mH 1 x 15nF 1 x 47nF 2 x 2.2nF 2 x 2.2nF Version 3 PS20/A0320/xx PS21/A0320/xx PS20/A0130/xx PS21/A0130/xx PS20/A0620/xx PS21/A0620/xx PS20/A0330/xx PS21/A0330/xx IEC CONNECTORS Version 2 PS20/A0630/xx PS21/A0630/xx www.elektron-bulgin.com 141 FiltersSection - 2010:FiltersSection - 2010 8/6/10 16:57 Page 142 MAINS FILTERS IEC Power Inlets Flange and Snap Fit (Twin Fused) PANEL MOUNTING ᔢ 2 or 4 Amp Current Rating ᔢ Twin Fused ᔢ Optional Additional Components ᔢ 2.8 or 6.3mm tabs PS25/A SNAP FIT ᔢ 2 or 4 Amp Current Rating ᔢ Twin Fused ᔢ Optional Additional Components ᔢ 2.8 or 6.3mm tabs ᔢ 1, 1.5, 2 or 3mm panels PS26/A IEC CONNECTORS PS25 or PS26/Axx 2x /xx xx Series Rating L/C Circuit Additional Components Tag Type and Configuration Panel Thickness PS25/A 02 = 2A 2 = Version 2 0 = None 28 = 2.8mm Blank = Flange PS26/A 04 = 4A 1 = Bleed (R) Resistor 63 = 6.3mm tabs 10 = 1.0mm 15 = 1.5mm 20 = 2.0mm 30 = 3.0mm Specification PS25/Axx2x/xx00 PS26/Axx2x/xxxx Part No. Example Max. Working Voltage: 250V a.c. 50-400Hz 250V a.c. 50-400Hz Max. Power Dissipation: 2.5W per fuse 2.5W per fuse PS25/A0420/28= Earth Leakage Current: <0.35mA (250V, 50Hz) <0.35mA (250V, 50Hz) Temperature Range: –25ºC to +85ºC –25ºC to +85ºC Max. Ambient Temp.: (@ Full Load) 40ºC (derate linearly to 0A @ 85ºC) 40ºC (derate linearly to 0A @ 85ºC) Test Voltage: 2700V d.c. 2 secs. Lines to Earth 1100V d.c. 2 secs. Live to Neutral 2700V d.c. 2 secs. Lines to Earth 1100V d.c. 2 secs. Live to Neutral PS25 series, flange fitting, standard filtered IEC power inlet, twin fused, rated at 4 amperes. L/C circuit version 2, i.e L1 = 2 x 0.7mH, Cx = 1 x 15nF, Cy = 2 x 2.2nF Without bleed resistor fitted, with 2.8mm tabs. Mating Connectors: PX0587, PX0587/SE, PX0588 PX0587, PX0587/SE, PX0588 Accessories: P.No. 14340 (see page 96) P.No. 14340 (see page 96) Compliant Compliant Approvals: RoHS 142 www.elektron-bulgin.com FiltersSection - 2010:FiltersSection - 2010 8/6/10 16:57 Page 143 MAINS FILTERS Rating & Version Table PS25/Axx2x/xx00 & PS26/Axx2x/xxxx Rating Version L1 Cx Cy 2 AMP “ “ 1 2 3 2 x 1.8mH 1 x 15nF 2 x 2.2nF 4 AMP “ “ 1 2 3 2 x 0.7mH 1 x 15nF 2 x 2.2nF IEC CONNECTORS Version 2 PS25/A022x/xx PS26/A022x/xx PS25/A042x/xx PS26/A042x/xx www.elektron-bulgin.com 143 FiltersSection - 2010:FiltersSection - 2010 8/6/10 16:57 Page 144 MAINS FILTERS Medical IEC Power Inlets (Twin Fused) PANEL MOUNTING ᔢ ᔢ ᔢ ᔢ 2 or 4 Amp Current Rating Medical Twin Fused Optional Additional Components ᔢ 2.8 or 6.3mm tabs PS25/B Flange SNAP FIT ᔢ ᔢ ᔢ ᔢ PS26/B Snap-Fit 2 or 4 Amp Current Rating Medical Twin Fused Optional Additional Components ᔢ 2.8 or 6.3mm tabs ᔢ 1, 1.5, 2 or 3mm panels IEC CONNECTORS PS25 or PS26/Bxx 2x /xx xx Series Rating L/C Circuit Additional Components Tag Type and Configuration Panel Thickness PS25/B 02 = 2A 2 = Version 2 0 = None 28 = 2.8mm Blank = Flange PS26/B 04 = 4A 1 = Bleed (R) Resistor 63 = 6.3mm tabs 10 = 1.0mm 15 = 1.5mm 20 = 2.0mm 30 = 3.0mm Specification PS25/Bxx2x/xx00 PS26/Bxx2x/xxxx Part No. Example Max. Working Voltage: 250V a.c. 50-400Hz 250V a.c. 50-400Hz Max. Power Dissipation: 2.5W per fuse 2.5W per fuse PS25/B0220/63 = Earth Leakage Current: <100µA (typically 5µA 250V, 50Hz) <100µA (typically 5µA 250V, 50Hz) Temperature Range: –25ºC to +85ºC –25ºC to +85ºC Max. Ambient Temp.: (@ Full Load) 40ºC (derate linearly to 0A @ 85ºC) 40ºC (derate linearly to 0A @ 85ºC) PS25 series, flange fitting, for medical applications, rated at 2 amperes. L/C circuit version 2, i.e L1 = 2 x 1.8mH, Cx = 1 x 15nF, without bleed resistor fitted, with 6.3mm tabs. Test Voltage: 2700V d.c. 2 secs. Lines to Earth 1100V d.c. 2 secs. Live to Neutral 2700V d.c. 2 secs. Lines to Earth 1100V d.c. 2 secs. Live to Neutral Mating Connectors: PX0587, PX0587/SE, PX0588 PX0587, PX0587/SE, PX0588 Accessories: P.No. 14340 (see page 96) P.No. 14340 (see page 96) Compliant Compliant Approvals: RoHS 144 www.elektron-bulgin.com FiltersSection - 2010:FiltersSection - 2010 8/6/10 16:57 Page 145 MAINS FILTERS Rating & Version Table PS25/Bxx2x/xx00 & PS26/Bxx2x/xxxx Rating Version L1 Cx 2 AMP “ “ 1 2 3 2 x 1.8mH 1 x 15nF 4 AMP “ “ 1 2 3 2 x 0.7mH 1 x 15nF IEC CONNECTORS Version 2 PS25/B042x/xx PS26/B042x/xx PS25/B022x/xx PS26/B022x/xx www.elektron-bulgin.com 145 FiltersSection - 2010:FiltersSection - 2010 8/6/10 16:57 Page 146 IEC CONNECTORS MAINS FILTERS 146 www.elektron-bulgin.com