Mezza-pede SMT Connectors Product Spec

Product Specification
Mezza-pede™
1mm Low Profile SMT Connector
Rev. 0 – January 26, 2009
Advanced Interconnections Corp. ▀ 5 Energy Way ▀ P.O. Box 1019 ▀ West Warwick, Rhode Island 02893 USA
Tel: (800) 424-9850 ▀ (401) 823-5200 ▀ FAX: (401) 823-8723
E-mail: [email protected] ▀ Web Site: http://www.advanced.com
Product Specification
1.0 Scope
Mezza-pede™ Low Profile 1mm Pitch SMT Connectors were designed for the mating and
unmating of a PC board (PCB) to a PCB, PCB to Flex cable or Flex cable to Flex cable.
2.0 Introduction
There are two (2) components that make up this connector system; a header and a socket
(receptacle). The receptacle incorporates a female shell with an internal contact, an insulator, and a
lead. The receptacle is typically mounted to the PC board (motherboard). The header incorporates a
male terminal, an insulator, and a lead. The header is attached to a daughter card in board to board
applications or to a flex circuit for PCB to cable assemblies. Both the receptacle and header are
shipped in tape and reel packaging. The receptacle has a Kapton dot for pick and place while the
headers are shipped with a protective (pick-and-place) cover that is removed after solder-attach.
This cover can be left in place for storage or for protection of the male terminals during the
handling processes.
3.0 Materials
3.1 Base Materials:
4.1.1 Male Terminal: Brass, CA3600
4.1.2 Female Shell: Brass, CA3600
4.1.3 Contact: BeCu, CA17200
4.1.4 Lead Frame: BeCu, CA17200
4.1.5 Insulator: LCP, Color Black, UL Rated 94V-0
4.1.6 Pick & Place Cover: LCP, Color Black, UL Rated 94V-0
4.1.7 Solder Paste: Lead-free, 96.5%Sn/3.0%Ag/0.5%Cu
3.2 Standard Plating:
4.2.1 Male Terminal: 0.000030[0.000762] min. Gold over 0.000050[0.00127] min.
Nickel.
4.2.2 Female Shell: 0.000010[0.000254] min. Gold over 0.000050[0.00127] min.
Nickel.
4.2.3 Contact: 0.000030[0.000762] min. Gold over 0.000050[0.00127] min.
Nickel.
4.2.4 Lead Frame: 0.000100[0.00254] min. Matte Tin over 0.000050[0.00127]
min. Nickel.
Mezza-pede™ SMT Connector, Rev. 0
Page 2
©2008, Advanced Interconnections Corp. Data provided as a general guideline only. Specifications subject to change without notice.
Product covered by patents issued and/or pending. Dim. shown: Inch/(mm)
Product Specification
4.0 Mechanical
ITEM
DESCRIPTION
STANDARD
REQUIREMENT
Insertion
Extraction
2.5 Lbs.
2.2 Lbs.
TEST CONDITION
14 Pos. Mounted, Axially
aligned for self-centering –
not lubricated
4.1
Mating / Unmating
Force
EIA 364-13
4.2
Durability
EIA 364-09
No evidence of damage,
LLCR < 10 milliohm
change from initial
100 cycles,
LLCR @ 5, 30 and 100
cycles
4.3
Mechanical Shock
EIA 364-27
No evidence of damage,
LLCR < 10 milliohm
change from initial
Shock at 50 g’s, 11
millisecond ½ sin wave, 18
shocks total
4.4
Mechanical Vibration
EIA 364-28
No evidence of damage,
LLCR < 10 milliohm
change from initial
Condition D (3.10 G’rms,
60 minutes each axis)
Mezza-pede™ SMT Connector, Rev. 0
Page 3
©2008, Advanced Interconnections Corp. Data provided as a general guideline only. Specifications subject to change without notice.
Product covered by patents issued and/or pending. Dim. shown: Inch/(mm)
Product Specification
5.0 Electrical
ITEM
DESCRIPTION
STANDARD
REQUIREMENT
Insertion
5.1
Insertion / Return Loss
TEST CONDITION
Return
EIA 364-108
DC to 4 GHz
@ -10 / -15db
< -3db
EIA 364-23
The contact resistance shall
not exceed 10 milliohm
change from initial
100 mA max / 20mV
5.3
Current Carrying
Capacity
EIA 364-70
Temperature rise above
ambient shall not exceed
30°C
Current Levels: 0.5, 1.0, 1.5
and 3.0 amps
5.4
Insulation Resistance
EIA 364-21
> 1000 MΩ
Unmated, at 100V DC, 2
minutes electrification time
5.2
Contact Resistance
(Low Level)
5.5
Dielectric
Withstanding Voltage
EIA 364-20
No evidence of breakdown,
arcing, or physical damage
to the connector
5.6
Capacitance
EIA 364-30
Reading between adjacent
contacts shall not exceed
1pF
5.7
5.8
Inductance
Characteristic
Impedance
EIA 364-109
Reading between adjacent
contacts shall be no greater
than 5nH
EIA 364-108
Reading between adjacent
contacts shall be no greater
than ±10% of the 50Ω
resistance
Mezza-pede™ SMT Connector, Rev. 0
Unmounted, unmated,
testing between rows
through adjacent contacts
(500 VAC for 1 minute,
500v/s)
Unmounted, unmated,
testing between adjacent
contacts
(Frequency 4GHz)
Unmounted, mutual (Loop)
(Frequency 4 GHz)
Terminating 2 adjacent
terminals with a 50Ω
surface mount resistor
(Frequency 4 GHz)
Page 4
©2008, Advanced Interconnections Corp. Data provided as a general guideline only. Specifications subject to change without notice.
Product covered by patents issued and/or pending. Dim. shown: Inch/(mm)
Product Specification
6.0 Environmental
ITEM
DESCRIPTION
6.1
Cyclic Humidity
STANDARD
REQUIREMENT
TEST CONDITION
EIA 364-31B
No evidence of damage,
LLCR < 10 milliohm
change from initial
504 Hours, 21 cycles, 85%
EIA 364-32C
No evidence of breakdown,
arcing or damage, LLCR <
10 milliohm change from
initial
5 cycles, -55°C to +125°C,
30 minute dwell
500 Hours, +125°C
LLCR @ 168, 336 & 500
Hrs
6.2
Thermal Shock
6.3
High Temperature
Life
EIA 364-17B
No evidence of breakdown,
arcing or damage, LLCR <
15 milliohm change from
initial
6.4
Mixed Flowing Gas
EIA 364-65A
No evidence of damage,
LLCR < 10 milliohm
change from initial
Mated connector, Class IIA
and IIIA, 20 days
6.5
Solderability
MIL-STD-202
95% min. coverage
Steam aging 60 min.
7.0 Operating Temperature
Operating Temperature - 55°C to +125°C
Mezza-pede™ SMT Connector, Rev. 0
Page 5
©2008, Advanced Interconnections Corp. Data provided as a general guideline only. Specifications subject to change without notice.
Product covered by patents issued and/or pending. Dim. shown: Inch/(mm)
Product Specification
8.0 Revision History
REV.
0
DESCRIPTION
New Release
Mezza-pede™ SMT Connector, Rev. 0
BY
G. Goodman
DATE
1-26-09
Page 6
©2008, Advanced Interconnections Corp. Data provided as a general guideline only. Specifications subject to change without notice.
Product covered by patents issued and/or pending. Dim. shown: Inch/(mm)