High Frequency, Low Jitter VCXO 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com US Headquarters: 630-851-4722 European Headquarters: +353-61-472221 Description Features The Connor-Winfield models V777, V778, V787 and V788 are 3.3V, Surface Mount 5.0x7.0mm, Voltage Controlled Crystal Oscillator (VCXO) with LVPECL differential outputs and enable/disable function. The V777, V778, V787 and V788 are designed for use with applications utilizing a PLL system requiring very high frequency and low jitter. The surface mount package is designed for high-density mounting and is optimum for mass production. •3.3V Operation •Absolute Pull Range (APR): ±30ppm •Temperature Range: 0 to 70°C or -40 to 85°C •Differencial LVPECL Outputs •Low Jitter 70fs RMS Typical •Enable / Disable Function: Models: V777-V787: Enable Low Models: V778-V788: Enable High •5.0x7.0mm Surface Mount Package •Tape and Reel Packaging •RoHS Compliant / Lead Free Absolute Maximum Ratings Parameter Storage Temperature Supply Voltage (Vcc) Input Voltage (Vc) Minimum -55 -0.5 -0.5 Nominal - - - Maximum 125 4.6 Vcc+0.5 Units °C Vdc Vdc Notes Operating Specifications Parameter Minimum Center Frequency: (Fo) 150 Operating Temperature Range: Models: V777-V778 0 Models: V787-V788 -40 Supply Voltage: (Vcc) 3.135 Supply Current (lcc) - Integrated Phase Jitter (BW=12kHz to 20MHz) - Typical Phase Noise for Fo = 245.76 MHz SSB Phase Noise at 10Hz offset - SSB Phase Noise at 100Hz offset - SSB Phase Noise at 1KHz offset - SSB Phase Noise at 10KHz offset - SSB Phase Noise at 100KHz offset - SSB Phase Noise at 1MHz offset - SSB Phase Noise at 10MHz offset - Sub Harmonic Content @ 25% Fo - @ 50% Fo @ 75% Fo Harmonic Content @ 2xFo - Spurious Content - Nominal Maximum Units - - 3.30 - 70 85 3.465 100 100 °C °C Vdc mA fs RMS -60 -85 -110 -135 -150 -150 -158 - - - - - - - dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz -45 -40 -45 -17 - - - - - -70 dBc dBc dBc dBc dBc Maximum Units - 710 70 MHz Notes 2 Input Characteristics Parameter Minimum Control Voltage Range (Vc) 0.3 Tuning Slope (Kv) - Absolute Pull Range: (APR) ±30 Monotonic Linearity -10 Input Impedance 130K Modulation Bandwidth (3dB) 25 Models: V777-V787 Enable / Disable Function Enable Input Voltage (Low) (Vil) - Disable Input Voltage (High) (Vih) 2.275 Models: V778-V788 Enable / Disable Function Enable Input Voltage (High) (Vil) 2.275 Disable Input Voltage (Low) (Vih) - Nominal 1.65 80 - - 180K - Notes 3.0 - - 10 - - Vdc ppm/V ppm 1 % Ohm KHz - - 1.68 - Vdc Vdc 2 - - - 1.68 Vdc Vdc 2 LVPECL Output Characteristics Parameter Bulletin Page Revision Date Vx605 1 of 2 04 06 June 2014 Load - Voltage (High) Voh (Low) Vol Duty Cycle at 50% Level Rise / Fall Time 20% to 80% Minimum - 2.275 - 45 - Nominal - - - 50 0.30 Maximum 50 - 1.68 55 0.45 Units Notes Ohms 3 Vdc Vdc % ns 2111 Comprehensive Drive 2111 Comprehensive Drive 2111 Comprehensive Drive 21112111 Comprehensive Drive Aurora, Illinois 60505 Comprehensive Drive Aurora, Illinois 60505 Aurora, Illinois 60505 Aurora, Illinois 60505 Phone: 630-851-4722 Aurora, Illinois 60505 Phone: 630-851-4722 Phone: 630-851-4722 Phone: 630- 851- 4722 Fax: 630-851-5040 Phone: 630-851-4722 Fax: 630-851-5040 Fax: 630-851-5040 Fax: 630- 851- 5040 www.conwin.com Fax: 630-851-5040 www.conwin.com www.conwin.com www.conwin.com www.conwin.com Models : V777-V787 Models : V777-V787 Enable / DisableOutput Function Models : V777-V787 E nable / Dis able F unc tion (P ad 2) E nable / Dis able F unc tion (P ad 2) Output R oHS compliant, lead free. S ee s older profile. E nablecove / Dis able tion (P ad 2) Output E nable Models : V777-V787 Package Hermetically sealed ceramic package with grounded metal NoF unc C onnection No C onnection E nable S oldering Proces s R oHS compliant, lead free. S ee s older profile. No C onnection nable E nable ad 2) E nable Output Soldering Process RoHS compliant, lead free. See Solder Profile Low/ Dis able F unc tionE(P Low E Low HighNo C onnection Disable E nable (Highnable E nable Impedance) Notes High Disable (High Impedance) High LowDisable (High Impedance) E nable 1 Absolute pull range (APR) is the minimum guaranteed pull range of the VCXO Models : V778-V788 : V778-V788 High Disable (High Impedance) under all conditions over the lifetime operation. Including calibration @ 25°C,Models : Models V778-V788 E nable / Dis able F unc tion (P ad 2) Output E nable F(P unc tion (P ad 2)Output Output frequency vs change in temperature, frequency vs. change in supply voltage, E nable / Dis able/ FDis uncable tion ad 2) Models : V778-V788 No C onnection E nable frequency vs. change in load, shock vibration and aging for ten years. 2111and Comprehensive Drive No C onnection E nable No C onnection nable E nable ad 2) E nable Output High/ Dis able F unc tionE(P The APR is referenced to Fo. Positive Transfer Function High E nable High E nable E nable Aurora, 60505 Low No C onnection Disable (High Impedance) 2.Outputs are enabled with no connection onIllinois pad 2. When oscillator is disabled both Low Low Disable (High Impedance) HighDisable (High Impedance) E nable outputs are in high impedance state. Phone: 630-851-4722 Low Disable (High Impedance) 3.50 ohm termination into Vcc-2V or Thevein equivalent R oHS compliant, lead free. S ee s older profile. Packaging Characteristics R oHS compliant, lead free. S ee s older profile. S oldering Proces s S oldering Proces s S oldering Proces s Package Layout Fax: 630-851-5040 Test Circuit www.conwin.com 0.275 0.055 0.275 0.275(7.0mm) 0.055 0.055 (1.4mm) (7.0mm) (7.0mm) (1.4mm) (1.4mm) 6 5 4 6 56 45 40.275 0.055 (7.0mm) (1.4mm) CW 1412 CW 1412 CW 1412 6 5 4 Models : V777-V787 Bottom Bottom Bottom 0.1970.197 0.197 E nable / Dis ableV778 F uncV778 tion (P ad 2) Output (5.0mm) V778 View View View (5.0mm) CW 1412 (5.0mm) 622.08 M No C622.08 onnection E nable Bottom 0.197 622.08 M M V778 View (5.0mm) Low E nable 1 2 3 1 1 21 32 1 1.65V 3 1 622.08 M 0.102 High Disable (High Impedance) 0.102 0.102 E/D (2.6mm) 0.0700.070 Dimensional (2.6mm) 0.070 Dimensional 1 2 3 (2.6mm) 1 Dimensional (1.8mm) Models : V778-V788 (1.8mm) Tolerance +/-0.008 (+/-0.2mm) (1.8mm) Tolerance +/-0.008 (+/-0.2mm) 0.102 Tolerance +/-0.008 (+/-0.2mm) E nable / Dis able Output 0.070F unc tion (P ad 2) (2.6mm) Dimensional = Vcc2 = 3.3Vdc Vcc = Vcc2 Vcc = 3.3Vdc Vcc = Vcc2 = 3.3Vdc (1.8mm) No C onnection E nable Tolerance +/-0.008 (+/-0.2mm) High E nable P ad P ad 1 1 2 2 3 3 4 4 5 5 6 6 1.65V E/D Rt Tape and Reel Vcc = Vcc2 = 3.3Vdc 45 / 55 45 / 55 45 / 55 Temperature 260°C 45 / 55 220°C 45 / 55 Duty Cycle180°C 150°C 45 120°C / 55 Temperature Temperature 260°C 260°C 220°C 220°C 180°C 260°C 260°C 260°C Temperature 180°C 150°C 150°C 120°C 260°C 260°C 220°C 120°C 180°C 150°C tf 120°C 0 0 tf tr tf 0 120 S Max. Time 10 S 120 S 60 S Max. 120 S Max. Max. 0 360 Sec. Max. Phase Noise Plot Rt V7 V V7 7 7 77 10 S 10 S 60 S 60 S Max. Max.Max. 360 Sec. 120 S 360 Sec. Max. Max. Time Time Time 10 S 60 S Max. 360 Sec. Max. - 8 622.08M - - 622.08M 622.08M 8 8 Output Frequency: Temperature R ange: E nable/Dias ble: Output Frequency: Temperature R7= ange: nable/Diasble: Frequency Format 7 = 0 to 70° C nableELow Output Frequency: Temperature RCEange: E7= nable/Diasble: Frequency Format 0 to 70° -xxx.xM Min.* E nable Low 8 = -40 to 857° =C 8 = E nable High Frequency Format to 85 70°° CC nable Low -xxx.xxxxxxM Max.*-xxx.xM Min.* 8 =7 =-400 to 8 =7=EEnable High -xxx.xM Max.* Min.* -xxx.xxxxxxM 8 = -40 to 85 ° C 8 = E nable High *Amount of numbers Output Frequency: Temperature E nable/Diasble: APR : -xxx.xxxxxxM Max.* S upply Voltage: R ange: of numbers after the decimal*Amount point. Frequency Format upply 7 = 0Sto 70° CVoltage: M = of numbers 7=MHz E nable Low + /-30ppmAPR : 3.3Vdc after*Amount the decimal point. APR : S upply Voltage: -xxx.xM Min.* + /-30ppm 3.3Vdc afterMHigh the point. 8 = -40 to 85 ° C 8 = E nable = decimal MHz + /-30ppm 3.3Vdc M = MHz -xxx.xxxxxxM Max.* 7 V7 Temperature 8 - 622.08M E xample: APR : S upply Voltage: after the decimal point. E xample: V778-622.08M = 5x7mm, LVPE C L, VC XO, + /-30ppm 3.3Vdc M = MHz E xample: V778-622.08M 5x7mm, VC XO, 3.3Vdc, -40 to 85C , += /-30APR , LVPE C L,US Headquarters: V778-622.08M =to5x7mm, LVPE C L,, VC XO, 3.3Vdc, -40 85C , + /-30APR Output Frequency 622.08MHz US Headquarters: 630-851-4722 3.3Vdc, -40 to 85C , + /-30APR , US Headquarters: E xample: Output Frequency 622.08MHz Output Frequency 622.08MHz V778-622.08M =European 5x7mm, LVPE C L, 630-851-4722 VC630-851-4722 XO, Headquarters: European Headquarters: 3.3Vdc, -40 to 85C , + /-30APR , US Headquarters: + 353-61-472221 European Headquarters: Output Frequency 622.08MHz + 353-61-472221 260°C 260°C 45 / 55 220°C 180°C 80% 50% 120°C 150°C 20% Q 0 tf Bulle tin Time 120 S Max. 10 S 60 S Max. 360 Sec. Max. Ordering Information Specifications subject to change without notice. All dimensions in inches. © Copyright 2008 The Connor-Winfield Corporation Specifications subject to change without notice. All dimensions in inches. © Copyright 2008 The Connor-Winfield Corporation 7 - 8 622.08M Specifications subject to change without notice. All dimensions in inches. © Copyright 2008 The Connor-Winfield Corporation Output Frequency: Temperature R ange: E nable/Dias ble: Example: Frequency Format 7 = 0 to 70° C 7= E nable Low -xxx.xM Min.* V778-622.08M = 5x7mm, LVPECL, VCXO 8 = -40 to 85 ° C 8 = E nable High APR : + /-30ppm S upply Voltage: 3.3Vdc -xxx.xxxxxxM Max.* *Amount of numbers after the decimal point. M = MHz 3.3Vdc, -40 to 85°C, ±30APR, Output Frequency 622.08MHz E xample: Specifications subject to =change without See Connor-Winfield's website for latest revision. All dimensions in inches. V778-622.08M 5x7mm, LVPE Cnotification. L, VC XO, © Copyright 2014 The Connor-Winfield Corporation Not intended for life support applications. 3.3Vdc, -40 to 85C , + /-30APR , US Headquarters: Output Frequency 622.08MHz 630-851-4722 630-851-4722 + 353-61-472221 European Headquarters: Vx605+ 353-61-472221 Bulle tin Vx605 Bulle tin 2 of 2 Vx605 Page 2 of 2 Re vision Page 03tin 2 of 2 Bulle Re vision 03 Se p Page 2011 Da te Re15 vision 03 15 Se p 2011 Da te 15 Se p 2011 Da te Re vision Page Specifications subject to change without notice. All dimensions in inches. © Copyright 2008 The Connor-Winfield Corporation V7 = Solder RtProfile *Amount of numbers Cycle Q tr Rt Rt = Rt = Q 80% 50% tf tr tr 20% Q 1 45 / 55 Rt Rt Rt E/D 45 / 55 Rt = 1Duty Rt RtRt 1.65V Rt = Duty Cycle Duty Cycle Duty Cycle 45 / 55 1 1 2 Rt Output Waveform P ad C onnec tion P ad C onnec tion C ontrol Voltage Q Q Cad ontrolPVoltage adable C onnec tion Q EPnable / Dis 80% 80% E nable / Dis able50% 80% 50% C ontrol G1 round (C as e) Voltage 50% G round (C as e) 20% 20% 2Output E nable / Dis 20% Q Q ableQ Output Q Q tr 3OutputGQround (C as e) Output Q 4 Vcc Output Q Vcc 5 Output Q 6 Vcc 0.070 (1.78mm) 2 1.65V 1.65V E/D E/D Vcc = Vcc2 = 3.3Vdc Low Pad Layout Disable (High Impedance) Suggested Pad Connections 0.200 0.200 0.200 (5.08mm) (5.08mm) (5.08mm) 0.100 0.100 P ad P ad C onnec tion 0.100 (2.54mm)(2.54mm) 0.200 (2.54mm) 1 C ontrol Voltage (5.08mm) 6 4 65 54 0.079 0.079 0.100 4 (2.0mm) 6 5 (2.0mm) 0.079 (2.54mm) 2 E nable / Dis able (2.0mm) 3 G round (C as e) Top 0.165 0.165Top 4 6 5 0.079 Top View View 0.165 (4.2mm)(4.2mm) Bypass Bypass (2.0mm) 4 Output Q View (4.2mm) Bypass CapacitorCapacitor 0.01uF 0.01uF Capacitor 5 Output Q 0.165 1 2 3 Top 3 1 2 0.01uF View (4.2mm) Ground 1 2 3 Ground 6 Bypass Vcc Ground 0.070 0.070 Capacitor (1.78mm) 0.01uF 2(1.78mm) 1 2 0.070 3 (1.78mm) Ground 2 2 Da te Bulletin Page Revision Date Vx605 2 of 2 03 15 Se p 2011 Vx605 2 of 2 04 06 June 2014